Welcome to download the newest Pass4itsure PR000041 dumps: http://www.pass4itsure.com/PR000041.html
Flydumps Cisco 642-821 exam questions and answers in PDF are prepared by our expert, Moreover, they are based on the recommended syllabus covering all the Cisco 642-821 exam objectives.You will find them to be very helpful and precise in the subject matter since all the Cisco 642-821 exam content is regularly updated and has been checked for accuracy by our team of SAP expert professionals.
QUESTION 176
Which policy map configuration command can be used to mitigate the problem of TCP global synchronization?
A. random-detect
B. queue-limit 10
C. compression header ip tcp
D. priority 24
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 177
Given the above output, what is the current CIR for this VC?
A. 1000
B. 2000
C. 8000
D. 100000
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 178
Which command associates a map class with an interface or subinterface when configuring Frame Relay traffic shaping?
A. frame-relay map
B. frame-relay class
C. map-class frame-relay
D. frame-relay map-class
E. map frame-relay class
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 179
Given the partial configuration, what function does the command dialer watch-group 8 have?
A. Any IP traffic, except OSPF traffic, will cause interface BRI0 to dial RouterB
B. When the watched route, 172.22.53.0/24, is removed from the routing table and there is no other valid route, dialer watch then initiates a call to RouterB.
C. When the watched route, 172.22.53.0/24, is removed from the routing table, regardless of whether there is another valid route pointing to an interface other than interface BRI0, dialer watch initiates the call to RouterB
D. When the load threshold is met and any IP traffic, except OSPF traffic, is destined for 172.22.53.0/24 network, the dialer watch will initiate the call to RouterB.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 180
Refer to the exhibit. Based on the partial configuration shown, how is this router configured?
A. as a PPPoA client
B. as a PPPoE client
C. as an ISDN PRI group interface
D. as an ISDN BRI group interface
Correct Answer: A Section: (none) Explanation Explanation/Reference:
QUESTION 181
A network administrator needs to provide telecommuters with access to corporate network services. For security reasons, the asynchronous interface should be configured to provide an in-band PPP connection only and not allow an EXEC connection. What must the administrator configure to accomplish this?
A. Router(config-if)# async mode dedicated
B. Router(config-if)# async mode interactive
C. Router(config-if)# async dynamic address
D. Router(config-line)# autoselect ppp during-login
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 182
Examine the configuration.
When using CBWFQ, what will happen to UDP packets if their destination queue is full?
A. The router will send a BECN message to the host.
B. The packet will be sent to the class-default queue.
C. The host will resend the packet if it does not receive an ACK message
D. Tail dropping will occur.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 183
Which three conditions would suggest using weighted random early detection as an alternative to tail drops when configuring class-based weighted fair queuing? (Choose three.)
A. Your network is designed for a more passive rather than active strategy in discarding packets.
B. You want to enable TCP global synchronization to avoid congestion.
C. You would like to use IP Precedence or DSCP values to make early dropping decisions.
D. The bulk of your traffic is TCP traffic.
E. You would like a chance to decide which packets will be dropped when it becomes necessary.
Correct Answer: CDE Section: (none) Explanation
Explanation/Reference:
QUESTION 184
Refer to the show ip route output of the exhibit. RIP is configured on R1, R2, and R3. All three routers are able to ping each other. However, R2 is not receiving the routes advertised by R3. What can be done to resolve this problem?
A. Configure frame-relay inverse-arp on the R1 serial0.1 subinterface.
B. Configure no frame-relay inverse-arp on the R1 serial0.1 subinterface.
C. Configure ip slit-horizon on the R1 serial0.1 subinterface.
D. Configure no ip slit-horizon on the R1 serial0.1 subinterface.
E. Configure ip slit-horizon on R2 and the R3 serial0 interfaces.
F. Configure no ip slit-horizon on R2 and the R3 serial0 interfaces.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 185
When a PPP connection is being established, which three configuration features are negotiated through the LCP? (Choose three.)
A. callback
B. multilink
C. encryption
D. compression
E. protocol multiplexing
Correct Answer: ABD Section: (none) Explanation
Explanation/Reference:
QUESTION 186
Identify two characteristics of the RADIUS protocol when associated with AAA? (Choose two.)
A. uses TCP
B. fully encrypts the body of the packet
C. based upon open standards
D. allows router commands to be grouped on a per-user or per-group basis
E. combines the functions of authorization and authentication
Correct Answer: CE Section: (none) Explanation
Explanation/Reference:
QUESTION 187
Which statement best describes the following configuration ?
policy-map-Policy1 class Class1 priority 10 class Class2 bandwidth 20 queue-limit 45 class Class3 bandwidth 30 random-detect A. WRED is used in Class1 and Class3. Traffic not matching any classes will be dropped.
B. WRED is used in Class1 and Class3. Traffic not matching any classes will be best effort by a default class
C. WRED is used in Class3. Traffic not matching any classes will be dropped
D. WRED is used in Class3. Traffic not matching any classes will be handled by the class-default class
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 188
Given the above configuration commands, when will additional B channels be added to the multilink PPP bundle?
A. when the total load of outbound traffic reaches 128 k
B. when the total load of inbound traffic reaches 128 k
C. when the maximum calculated load as the larger of the outbound and inbound loads reaches 128 k
D. when the total load of inbound traffic reaches 50 percent of bandwidth utilization
E. when the total load of outbound traffic reaches 50 percent of bandwidth utilization
F. when the load of the inbound or outbound traffic reaches 50% utilization
Correct Answer: F Section: (none) Explanation
Explanation/Reference:
QUESTION 189
Which two encapsulation methods require that an 827 ADSL router be configured with a PPP username and CHAP password? (Choose two.)
A. PPPoE with the 827 configured as a bridge
B. PPPoE with the 827 configured as the PPPoE client
C. PPPoA
D. RFC 1483 Bridged with the 827 configured as the PPPoE client
E. RFC 1483 Bridged with the 827 configured as a bridge
Correct Answer: BC Section: (none) Explanation
Explanation/Reference:
QUESTION 190
Which command will allow RTA to test its legacy DDR configuration without having any dialer map statements configured?
A. isdn test call interface bri 0 5551234 speed 56
B. ping 10.10.10.2
C. debug isdn q931
D. debug isdn q921
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 191
In Frame Relay traffic shaping, what does the term committed burst (Bc) refer to?
A. the rate, in bits per second, at which the Frame Relay switch agrees to transfer data
B. the maximum number of bits that the switch agrees to transfer during any Tc
C. the maximum number of uncommitted bits that the Frame Relay switch attempts to transfer beyond the CIR for the first time interval only
D. the number of bits, during any Tc, over the CIR that can be transmitted but will be marked DE
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 192
Given the partial configuration, what function does the command dialer watch-group 8 have?
A. Any IP traffic, except OSPF traffic, will cause interface BRI0 to dial RouterB
B. When the watched route, 172.22.53.0/24, is removed from the routing table and there is no other valid route, dialer watch then initiates a call to RouterB.
C. When the watched route, 172.22.53.0/24, is removed from the routing table, regardless of whether there is another valid route pointing to an interface other than interface BRI0, dialer watch initiates the call to RouterB.
D. When the load threshold is met and any IP traffic, except OSPF traffic, is destined for 172.22.53.0/24 network, the dialer watch will initiate the call to RouterB.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 193
How can an ISDN interface be used as a backup link for a primary interface and still use DDR to communicate with other sites?
A. By using dialer profiles.
B. An ISDN interface cannot be both.
C. With the command backup interface serial 0/0 on the bri0/0 interface along with normal DDR commands.
D. With the command backup interface bri 0/0 on the physical interface and normal DDR commands on the bri0/0 interface
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 194
How is cable broadband technology able to transmit downstream and upstream data while at the same time delivering television content?
A. The cable operator uses the VHF hyperband to transmit and receive data signals.
B. The cable operator assigns any available spectrum to data, depending on how its own television spectrum is being used.
C. The cable operator uses specific bandwidths for data signals specified by DOCSIS.
D. The cable operator places its data signals into clean areas where there is no interference from noise or other signals.
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 195
Refer to the exhibit. Given the output generated by the debug dialer command, what solution can be configured on R1 to correct the problem?
A. Configure a dialer-list in global configuration mode.
B. Configure the dialer-group command on the dialer interface.
C. Configure the dialer-group command on the BRI0 physical interface.
D. Configure the dialer pool command on the dialer interface.
E. Configure the dialer pool-member command on the dialer interface.
F. Configure a local username entry for R2.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 196
In the exhibit, R1 is connected over a Frame Relay cloud to R2 and a non-Cisco device, R3. What must be configured on the R1 S0 interface to achieve full connectivity with the spoke routers?
A. encapsulation frame-relay frame-relay map ip 10.10.10.2 102 broadcast frame-relay map ip 10.10.10.3 103 broadcast
B. encapsulation frame-relay ietf frame-relay map ip 10.10.10.2 102 broadcast frame-relay map ip 10.10.10.3 103 broadcast
C. encapsulation frame-relay frame-relay map ip 10.10.10.2 102 broadcast ietf frame-relay map ip 10.10.10.3 103 broadcast
D. encapsulation frame-relay frame-relay map ip 10.10.10.2 102 broadcast frame-relay map ip 10.10.10.3 103 broadcast ietf
E. encapsulation frame-relay frame-relay map ip 10.10.10.2 102 broadcast cisco frame-relay map ip 10.10.10.3 103 broadcast
Correct Answer: D Section: (none) Explanation Explanation/Reference:
QUESTION 197
Given the output shown in the exhibit, which three statements are true about PPP compression? (Choose three.)
A. The interface is configured with TCP header compression.
B. The interface is configured with STAC compression.
C. The interface is configured with Predictor compression.
D. The actual data throughput of the router is less than what it would be if compression were not being applied.
E. The total amount of data to be transmitted before applying compression is 160,000.
F. The total amount of data to be transmitted after applying compression is 40,000.
Correct Answer: BDE Section: (none) Explanation
Explanation/Reference:
QUESTION 198
Refer to the exhibit. Which policy-map configuration will best ensure that packets classified as voice are not dropped in favor of other network traffic?
A. POLICY-1
B. POLICY-2
C. POLICY-3
D. POLICY-4
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 199
Which type of remote-user VPN has users dial in to an Internet service provider (ISP) where an ISP-owned device establishes a secure tunnel to the users’ enterprise network?
A. client initiated VPN
B. network access server (NAS) initiated VPN
C. intranet VPN
D. extranet VPN
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 200
Which set of commands will accomplish the tasks below?
-Make bri0/0 a backup interface to serial0/0.
–
Activate the backup interface 5 seconds after the primary link fails and deactivate the backup interface 10 seconds after the primary link is re-established.
A.
Router(config)#interface bri 0/0 Router(config-if)#backup interface serial 0/0 Router(config-if)#backup delay 5 10
B.
Router(config)#interface serial 0/0 Router(config-if)#backup interface bri 0/0 Router(config-if)#backup delay 5 10
C.
Router(config)#interface bri 0/0 Router(config-if)#backup interface serial 0/0 Router(config-if)#backup delay 10 5
D.
Router(config)#interface serial 0/0 Router(config-if)#backup interface bri 0/0 Router(config-if)#backup delay 10 5
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 201
When a cable modem is being provisioned to operate with a host system for Internet services, which two options must occur before Layer 1 and 2 connectivity can occur? (Choose two.)
A. The cable modem must request an IP address and core configuration information from a Dynamic Host Configuration Protocol (DHCP) server
B. The cable modem powering up must scan and lock on the RF data channel in the downstream path.
C. The modem must request a DOCSIS configuration file from a TFTP server.
D. The cable modem must register with the CMTS.
E. The modem must read specific maintenance messages in the downstream path.
Correct Answer: BE Section: (none) Explanation
Explanation/Reference:
QUESTION 202
From the CBWFQ configuration referenced in the display, what is the queue-limit for class2?
A. no limit
B. 16
C. 32
D. 64
E. 128
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
Preparing Cisco 642-821 exam is not difficult now.You can prepare from Cisco 642-821 Certification or Cisco 642-821 dumps.Here we have mentioned some sample questions.You can use our Cisco 642-821 study material notes for test preparation. Latest Cisco 642-821 study material available.
Welcome to download the newest Pass4itsure PR000041 dumps: https://www.pass4itsure.com/pr000041.html
Cisco 642-821 Exam Sample, Download Cisco 642-821 Practice Questions Will Be More Popular
We at Flydumps Cisco 642-821 exam sample questions are IT. experts and are highly experienced in the field of exam dumps and study notes as our team is continuously working for the more accomplished Cisco 642-821 exam guide and test questions. At Cisco 642-821 exam sample questions Flydumps, all the necessary Cisco 642-821 exam guide is available which not only includes free Cisco 642-821 but it also contains Cisco 642-821 study guide and Cisco 642-821 practice exam.
QUESTION 141
When a PPP connection is being established, which three configuration features are negotiated through the LCP? (Choose three.)
A. callback
B. multilink
C. encryption
D. compression
E. protocol multiplexing
Correct Answer: ABD Section: (none) Explanation
Explanation/Reference:
QUESTION 142
A corporation is currently running a Frame Relay network in a hub and spoke topology. To ease the WAN bandwidth bottleneck, the company would like to configure compression in an effort to optimize WAN links. The corporation does use multiple protocols and other applications that require that the IP header remains intact. Which type of compression should this corporation use?
A. link compression
B. payload compression
C. TCP/IP header compression
D. MPPC
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 143
Instead of purchasing dedicated router ports, a company wants to reduce costs by allowing any one of the available physical BRI interfaces on a central site router to dial out to remote branch offices.
Which two commands provide this capability? (Choose two.)
A. dialer-group
B. multilink ppp
C. interface dialer
D. dialer hunt-group
E. dialer rotary-group
Correct Answer: CE Section: (none) Explanation
Explanation/Reference:
QUESTION 144
Which command displays the remote network addresses associated with each PVC?
A. show ip route
B. show frame-relay lmi
C. show frame-relay map
D. show frame-relay pvc
E. show frame-relay status
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 145
Refer to exhibit. Notice the partial show running-config output on R1. R1 is connected with a multipoint subinterface over the Frame Relay to the spoke routers R2 and R3. The ISDN interface is configured to provide a back-up link should the primary connection to R2 fail.
However, when the PVC to R2 drops, the BRI interface remains in “standby” mode and does not bring up the back-up link. What could the problem be?
A. The EIGRP updates are configured as noninteresting traffic
B. The backup command is configured under the S0.1 multipoint interface of R1
C. The R1 S0 interface remains up because of the active PVC between R1 and R3.
D. The R1 S0.1 interface remains up because of the active PVC between R1 and R3.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 146
Which set of commands will accomplish the tasks below?
-Make bri0/0 a backup interface to serial0/0.
–
Activate the backup interface 5 seconds after the primary link fails and deactivate the backup interface 10 seconds after the primary link is re-established.
A.
Router(config)#interface bri 0/0 Router(config-if)#backup interface serial 0/0 Router(config-if)#backup delay 5 10
B.
Router(config)#interface serial 0/0 Router(config-if)#backup interface bri 0/0 Router(config-if)#backup delay 5 10
C.
Router(config)#interface bri 0/0 Router(config-if)#backup interface serial 0/0 Router(config-if)#backup delay 10 5
D.
Router(config)#interface serial 0/0 Router(config-if)#backup interface bri 0/0 Router(config-if)#backup delay 10 5
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 147
Which field is defined in the PPP format that allows PPP to dynamically negotiate link options?
A. address
B. control
C. protocol
D. flag
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 148
An administrator is attempting to configure TACACS+ AAA authentication for privileged EXEC mode access. The current configuration is as follows:
RTB(config)# tacacs-server host 192.168.1.23 RTB(config)# tacacs-server key CISCO RTB(config)# aaa new-model RTB(config)# aaa authentication enable AAA group tacacs+ enable none
With the above configuration, what will be the result?
A. Authentication will be successful from the TACACS+ server.
B. Authentication will be successful from the local enable password.
C. Because the authentication list is not applied to any lines, authentication will not be successful.
D. Because the authentication enable command cannot used with a named list, authentication will not be successful
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 149
Drag Drop question
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference: QUESTION 150
Drag Drop question
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference:
QUESTION 151
lab question Please refer to Question 45, but take notice you wil use the same command in this questions, but some paramters like IP address will be different.
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference:
QUESTION 152
Which two debugs should you use to find the cause of an unsuccessful PAP negotiation? (Choose two.)
A. debug ppp pap
B. debug ppp negotiation
C. debug authentication pap
D. debug ppp authentication
Correct Answer: BD Section: (none) Explanation
Explanation/Reference:
QUESTION 153
When the ISAKMP negotiation begins in IKE Phase 1 main mode, ISAKMP looks for an ISAKMP policy that is the same on both peers. Which peer is responsible for matching policies?
A. The peer that initiates the negotiation sends all its policies to the remote peer, and the remote peer tries to find a match with its policies.
B. The remote peer sends all its policies to the initiating peer, and the initiating peer tries to find a match with its policies.
C. Both peers send all their policies to the other peer, and each peer tries to find a match with its policies.
D. Both peers send all their policies to the other peer, but just the initiating peer tries to find a match with its policies.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 154
Which statement is true about payload compression?
A. Payload compression can be used in conjunction with link compression.
B. The payload compression algorithm uses Predictor or STAC to compress traffic into another data link layer such as PPP.
C. Payload compression is appropriate for virtual network services such as Frame Relay and ATM.
D. With payload compression the complete packet is compressed and the switching information in the header is not available.
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 155
Drag Drop question
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference:
QUESTION 156
Given the above output, which statement is true?
A. An LMI is not being received from the Frame Relay switch.
B. The DLCI has been removed from the Frame Relay switch.
C. The remote router connection to the Frame Relay switch is not functioning
D. The router is configured to be a Frame Relay switch.
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 157
What are three drawbacks to using RFC 1483/2684 bridging with ADSL? (Choose three.)
A. Bridging is inherently insecure and requires a trusted environment.
B. Bridging depends heavily on broadcasts in order to establish connectivity
C. Bridging requires expensive routing equipment because of the extensive Layer 3 overhead.
D. Bridging architecture may allow IP address hijacking.
E. Bridging, because of its ATM WAN configuration, can require considerable effort during initial troubleshooting.
F. Bridging architecture can be complex to install and maintain.
Correct Answer: ABD Section: (none) Explanation
Explanation/Reference:
QUESTION 158
Based on the above output, how many IKE policies were administratively defined?
A. 0
B. 1
C. 2
D. 3
E. 4
F. 5
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 159
What two things will occur when r1 initiates a call to r2 and attempts to make a connection? (Choose two.)
A. Both routers will send a challenge.
B. Only r2 will send a challenge.
C. The r2 router will generate a hash value and send it to r1.
D. The PPP connection establishment will succeed.
E. The PPP connection establishment will fail.
Correct Answer: BE Section: (none) Explanation
Explanation/Reference:
QUESTION 160
How can an ISDN interface be used as a backup link for a primary interface and still use DDR to communicate with other sites?
A. By using dialer profiles
B. An ISDN interface cannot be both.
C. With the command backup interface serial 0/0 on the bri0/0 interface along with normal DDR commands.
D. With the command backup interface bri 0/0 on the physical interface and normal DDR commands on the bri0/0 interface.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 161
Observe the exhibited output from a show isdn status command. Which statement is true?
A. There were five attempts to make calls.
B. Layer 1 is not operational
C. Layer 2 is operational.
D. The router is not exchanging frames with the ISDN switch.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 162
Which two of the following events will occur when the router command backup load 60 5 is used? (Choose two.)
A. The backup link activates when the primary link exceeds 60 percent of bandwidth
B. The backup link activates when the primary link exceeds 60 kbps.
C. The backup link deactivates when the primary link falls to 5 percent bandwidth.
D. The backup link deactivates when the combined load falls to 5 percent bandwidth.
E. The backup link deactivates when the combined load falls to 5 kbps.
Correct Answer: AD Section: (none) Explanation
Explanation/Reference:
QUESTION 163
How is cable broadband technology able to transmit downstream and upstream data while at the same time delivering television content?
A. The cable operator uses the VHF hyperband to transmit and receive data signals.
B. The cable operator assigns any available spectrum to data, depending on how its own television spectrum is being used.
C. The cable operator uses specific bandwidths for data signals specified by DOCSIS.
D. The cable operator places its data signals into clean areas where there is no interference from noise or other signals.
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 164
Which two commands are used to verify and troubleshoot a PPP session? (Choose two.)
A. show interfaces
B. show PPP
C. debug PPP negotiation
D. debug PPP session
E. debug ppp dialer
Correct Answer: AC Section: (none) Explanation
Explanation/Reference:
QUESTION 165
Which type of remote-user VPN has users dial in to an Internet service provider (ISP) where an ISP-owned device establishes a secure tunnel to the users’ enterprise network?
A. client initiated VPN
B. network access server (NAS) initiated VPN
C. intranet VPN
D. extranet VPN
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 166
Which of the following statements is correct based on the Cisco router output of the show isdn status command?
Router#show isdn status Global ISDN Switchtype=basic-ni ISDN BRI0 interface dsl 0, interface ISDN Switchtype=basic-ni Layer 1 Status: ACTIVE Layer 2 Status: TEI=73, Ces=2, SAPI=0, State=TEI_ASSIGNED TEI=74, Ces=1, SAPI=0, State=TEI_ASSIGNED Layer 3 Status : 0 Active Layer 3 Call(s)
A. Layer 1, 2, and 3 status is active.
B. TEI values assigned are not a valid numbers.
C. Layers 1 and 2 status is active but Layer 3 status indicates lost connectivity.
D. Layer 1 status is active but Layer 2 status indicates lost connectivity.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 167
Based on the above configuration, which statement is true?
A. The backup interface will be used when traffic reaches 80 kbps on the primary interface
B. The backup interface will be disabled when the combined load on the primary and backup interfaces is less than 10%.
C. The backup interface will be disabled when the combined load on the primary and backup interfaces is less than 80 kbps.
D. The backup interface will be disabled when the load on the primary interface is less than 10%.
E. The backup interface will be disabled when the load on the primary interface is less than 80 kbps.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 168
When radius authentication is being configured on a router, which commands will allow a user to telnet successfully into the router?
Router(config)# radius-server host 192.168.1.23 Router(config)# radius-server key CISCO Router(config)# aaa new-model
A. Router(config)# aaa authentication login AAA group radius local none Router(config)# line vty 0 4 Router(config-line)# login authentication AAA
B. Router(config)# aaa authentication login AAA group radius local none Router(config)# line vty 0 4 Router(config-line)# login authentication CISCO
C. Router(config)# aaa authentication login default group radius local none Router(config)# line vty 0 4 Router(config-line)# login authentication AAA
D. Router(config)# aaa authentication login AAA group radius local none Router(config)# line vty 0 4 Router(config-line)# login authentication default
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 169
Which two statements are true about the use of the backup load 65 10 command on a router? (Choose two.)
A. The secondary line will terminate when the load of the primary line drops to 10% of the bandwidth of the primary line.
B. The secondary line will terminate when the aggregate load of the primary and backup lines drops to 10% of the primary line bandwidth.
C. The secondary line will come up 10 seconds after traffic on the primary line reaches 65% of the bandwidth of the primary line
D. The secondary line will come up when the traffic on the primary line reaches 65% of the bandwidth of the primary line.
E. The backup interface will come up 65 seconds after the primary link goes down.
F. The secondary interface will terminate the connection 10 seconds after the primary link comes up.
Correct Answer: BD Section: (none) Explanation Explanation/Reference:
QUESTION 170
Refer to the exhibit. Which statement is true about the show frame-relay pvc output?
A. Traffic shaping is enabled.
B. The remote connection is not working correctly.
C. The local connection is not working correctly
D. LMIs are not being received
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 171
Which timer is reset to the maximum configured value every time an interesting packet is forwarded across the link?
A. wait for carrier timer
B. dialer idle timer
C. dialer enable timer
D. busy timer
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 172
lab question Please refer to Question 22, but take notice you wil use the same command in this questions, but some paramters like IP address will be different.
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference:
QUESTION 173
Given the partial IPSEC datagram, which provides both authentication and confidentiality, identify the header marked as 2.
A. AH header
B. ESP header
C. MPLS VPN header
D. SA header
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 174
Which traffic queuing method gives a low-volume traffic stream preferential service?
A. FIFO
B. Priority
C. Custom
D. Weighted Fair
E. Low Latency
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 175
What are two advantages to the use of RFC 1483 to encapsulate IP data over ATM? (Choose two.)
A. multiprotocol support
B. inherently more secure because of the Address Resolution Protocol (ARP)
C. the CPE in bridge mode performs routing functions
D. ideal for single-user Internet access
Correct Answer: AD Section: (none) Explanation
Explanation/Reference:
FLYDUMPS Cisco 642-821 practice test have been prepared with great care and vigilance, keeping in view the demands of the aspirants for the certification. It is the fruit of long toil of our skilled and experienced IT professionals who have a thorough knowledge of the requirements of the said certification. Cisco 642-821 practice exam from FLYDUMPS imparts you confidence in stepping towards the Cisco 642-821 exam. With the complete collection of questions, FLYDUMPS Cisco 642-821 practice test have assembled to take you through exam questions to your Cisco 642-821 exam preparation.
Cisco 642-821 Test Software, Download Cisco 642-821 Preparation Materials For Sale