Cisco 640-802 contains a powerful new testing engine that allows you to focus on individual topic areas or take complete, timed exams from Cisco 640-802.The assessment engine also tracks your performance and presents feedback on a module-by-module basis, providing question-by-question Cisco 640-802 to the text and laying out a complete study plan for review.Cisco 640-802 also includes a wealth of hands-on practice exercises and a copy of the Cisco 640-802 network simulation software that allows you to practice your Cisco 640-802 hands-on skills in a virtual lab environment.The Cisco 640-802 supporting website keeps you fully informed of any exam changes
Exam A
QUESTION 1
Refer to the exhibit. What is the effect of the configuration that is shown?
A. It configures the virtual terminal lines with the password 030752180500.
B. It configures a Cisco network device to use the SSH protocol on incoming communications via the virtual terminal ports.
C. It allows seven failed login attempts before the VTY lines are temporarily shutdown.
D. It configures SSH globally for all logins.
E. It tells the router or switch to try to establish an SSh connection first and if that fails to use Telnet.
Correct Answer: B
QUESTION 2
Refer to the exhibit. What kind of cable should be used to make each connection that is identified by the numbers shown?
“Pass Any Exam. Any Time.” – www.actualtests.com 2 Cisco 640-802: Practice Exam
A. 1 – Ethernet straight-through cable 2 – Ethernet crossover cable 3 – serial cable 4 – Ethernet straight-through cable
B. 1 – Ethernet rollover cable 2 – Ethernet crossover cable 3 – serial cable 4 – null modem cable
C. 1 – Ethernet straight-through cable 2 – Ethernet crossover cable 3 – serial cable 4 – rollover cable
D. 1 – Ethernet crossover cable 2 – Ethernet straight-through cable 3 – fiber optic cable 4 – rollover cable
E. 1 – Ethernet straight-through cable
2 – Ethernet straight-through cable
3 – serial cable
4 – rollover cable
Correct Answer: E
QUESTION 3
You work as a network technician in a Company. Please study the exhibit carefully.
“Pass Any Exam. Any Time.” – www.actualtests.com 3 Cisco 640-802: Practice Exam
The router console screen is rapidly displaying line after line of output similar to what is shown in the exhibit. The help desk has called to say that users are reporting a slowdown in the network. What will solve this problem while not interrupting network operation?
A. Press the CTRL+C keys.
B. Save the configuration and reboot the router.
C. Enter the no debug all command.
D. Use the show processes command.
Correct Answer: C QUESTION 4
“Pass Any Exam. Any Time.” – www.actualtests.com 4 Cisco 640-802: Practice Exam
Please study the exhibit shown above carefully, and answer the following questions.
A static map to the S-AMER location is required. Which command should be used to create this map?
A. frame-relay map ip 172.30.0.3 702 broadcast
B. frame-relay map ip 172.30.0.3 196 broadcast
C. frame-relay map ip 172.30.0.3 344 broadcast
D. frame-relay map ip 172.30.0.3 704 broadcast
Correct Answer: B
QUESTION 5
You have finished physically installing an access point on the ceiling at your office. At a minimum, which parameter must be configured on the access point in order to allow a wireless client to operate on it?
A. SSID
B. AES
C. TKIP
D. PSK
Correct Answer: A
QUESTION 6
Which is the correct fallback sequence for loading the Cisco IOS?
A. Flash, TFTP server, ROM
B. ROM, Flash, NVRAM
C. Flash, NVRAM, RAM
D. ROM, TFTP server, Flash
Correct Answer: A QUESTION 7
Which tables of EIGRP route information are held in RAM and maintained through the use of hello and update packets? (Choose two.)
A. RTP table
B. SPF table
C. query table
D. neighbor table
E. DUAL table
F. topology table
Correct Answer: DF QUESTION 8
DRAG DROP
Refer to the exhibit. Complete this network diagram by dragging the correct device name of description name or description to the correct location. Not all the names or descriptions will be used.
A.
B.
C.
D.
Correct Answer:
QUESTION 9
Refer to the exhibit. Why are two OSPF designated routers identified on Core_Router?
A. The DR election is still underway and there are two contenders for the role.
B. The router at 208.149.23.130 is a secondary DR in case the primary fails.
C. Core_Router is connected to more than one multiaccess network.
D. Two router IDs have the same OSPF priority and are therefore tied for DR election. “Pass Any Exam. Any Time.” – www.actualtests.com 8 Cisco 640-802: Practice Exam
Correct Answer: C
Cisco 640-802 tests containing questions that cover all sides of tested subjects that help our members to be prepared and keep high level of professionalism. The main purpose of Cisco 640-802 exam is to provide high quality test that can secure and verify knowledge, give overview of question types and complexity that can be represented on real exam certification
QUESTION 10
As a CCNA candidate, you will be expected to know the POST process very well. A Cisco router is booting
and has just completed the POST process. It is now ready to find and load an IOS image.
What function does the router perform next?
A. It inspects the configuration file in NVRAM for boot instructions.
B. It attempts to boot from a TFTP server.
C. It loads the first image file in flash memory.
D. It checks the configuration register.
Correct Answer: D
CCNA Cisco 640-802 Exam Certification Guide is part of a recommended study program from Cisco 640-802 that includes simulation and hands-on training from authorized Cisco 640-802 Learning Partners and self-study products from Cisco 640-802.Find out more about instructor-led, e-learning, and hands-on instruction offered by authorized Cisco 640-802 Learning Partners worldwide
Cisco 640-802 Exam Certification Guide presents you with an organized test preparation routine through the use of proven series elements and techniques. “Do I Know This Already?” quizzes open each chapter and allow you to decide how much time you need to spend on each section. Cisco 640-802 lists and Foundation Summary tables make referencing easy and give you a quick refresher whenever you need it. Challenging Cisco 640-802 review questions help you assess your knowledge and reinforce key concepts. Cisco 640-802 exercises help you think about exam objectives in real-world situations, thus increasing recall during exam time.
Exam A
QUESTION 1
The following commands are executed on interface fa0/1 of 2950 Switch. Switch port port-security Switch port port-security mac-address sticky Switch port port-security maximum1
2950Switch (config-if)# switch port port-security 2950Switch (config-if)# switch port port-security mac-address sticky 2950Switch (config-if)# switch port port-security maximum1
The Ethernent frame that is shown arrives on interface fa0/1.Which two functions will occur when this frame rec two.)
Exhibit:
A. The MAC address table will now have an additional entry of fa0/1 FFFF FFFF FFFF.
B. Only host A will be allowed to transmit frames on fa0/1
C. This frame will be discarded when it is received by 2950Switch.
D. All frame will arriving on 2950Switch with a destination of 0000.00aa aaaa will be forwarded out fa0/1.
E. Hosts B and C may forward frames out fa0/1 but frames arriving from other switches will not be forward.
F. Only frames from source 0000.00bb bbbb. the first learned MAC address of 2950Switch, will be forward.
Correct Answer: BD Section: (none)Explanation
Explanation/Reference:
QUESTION 2
Multiple Questions
Enter IOS commands on the Dubai router to verify network operation and answer for multiple-choice
questions.
This TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
Click on the Console PC to gain access to the console of the router. No console of enable passwords are
required.
There are four multiple-choice questions with this task. Be sure to answer all four questions before
selecting the Next button.
No console of enable passwords are required.
What destination Layer2 address will be used in the frame header containing a 172.30.0.4?
A.694
B.24
C.248
D.882
Which connection uses the default encapsulation for serial interfaces on Cisco routers?
A. The serial connection to the South branch office.
B. The serial connection to the North Coast branch office.
C. The serial connection to the North branch office.
D. The serial connection to the Multinational Core.
To access the multinle-choice question click on the numbered if required, what password shouldbe configured on the router in the North branch office to allow a connection to be established withthe Dubai router?
A. Console B.En8ble C.Scr8 D.T1net
E. No password is required
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel.There are four multiple-choice questions with this task. Be sure to A static map to the C-AMERlocation is required. Which command should be used to create this map?
A. frame-relay map ip 172.30.0.3694 broadcast
B. frame-relay map ip 172.30.0.324 broadcast
C. frame-relay map ip 172.30.0.3248 broadcast
D. frame-relay map ip 172.30.0.3882 broadcast
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
What destination Layer2 address will be used in the frame header containing a 172.30.0.4?
A.694
B.24
C.248
D.882
Answer: A
Which connection uses the default encapsulation for serial interfaces on Cisco routers?
A. The serial connection to the South branch office.
B. The serial connection to the North Coast branch office.
C. The serial connection to the North branch office.
D. The serial connection to the Multinational Core.
Answer: C
Click on the Consore PC to gain access to the cosore of the router. No console or enable password are required.
To access the multinle-choice question click on the numbered if required, what password shouldbe configured on the router in the North branch office to allow a connection to be established withthe Dubai router?
A. Console B.En8ble C.Scr8 D.T1net
E. No password is required
Answer: D
QUESTION 3
A.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
Bomar (Config)#interface fa0/0 Bomar(Config-if)#ip nat inside Bomar(Config)#interface S0/0 Bomar(Config-if)#ip nat outside Bomar(Config-if)#exit Bomar(Config)#access-list 1 permit 192.168.16.33 0.0.0.15 Bomar(Config)#ip nat pool nat_test 198.18.237.225 198.18.237.230 prefix-length 29 Bomar(Config)#ip nat
inside source list 1 pool nat_test overload Bomar(Config)#end Bomar#ping 192.0.2.114
( The command ping must be successful) QUESTION 4
To configure the router (Gotha) click on the console host icon that is connected to a router by a serial console cable(shown in the diagram as a dashed black line). you can click on the buttons below to view the different windows. Each of the windows can be minimized by clicking on the [-].You can also reposition a window by dragging it by the title bar. The “Tab”key and most commands that use the “Control” or “Escape” keys are not supported and are not necessary to complete this simulation. The help command does not display all commands of the help system. Central Florida Widgets recently installed a new router in their Gotha office. Complete the net work installation by performing the initial router configurations and configuring RIPv2 routing using the router command line interface(CLI) on the Gotha router. Configure the router per the following requirements: Name of the roter is Gotha Enable-secret password is mi222ke The password to access user EXEC mode using the console is G8tors1 The password to allow telnet accessto the router is dun63lap IPv4 addresses must be configured as follows: Ethernet network209.165.201.0/27-router has fourth assignable host address in subnet. Serial network is 192.0.2.176/28-router has last assignable host address in the subnet. Interfaces should be enabled. Routing protocol is RIPv2.
A.
Correct Answer: A Section: (none)Explanation
Explanation/Reference:
Router>enable Router#config terminal Router(config)#hostname Gotha Gotha(config)#enable secret mi222ke Gotha (config) #line console 0 Gotha (config-line) #password G8tors1 Gotha (config-line) #exit Gotha (config) #line vty 04 Gotha(config-line)#password dun63lab Gotha(config-line)#login Gotha(config-line)#exit Gotha(config)#interface fa0/0 Gotha(config-if)#ip address 209.165.201.4 255.255.255.224 Gotha(config-if)# no shutdown Gotha(config)#interface s0/0/0 Gotha(config-if)#ip address 192.0.2.190 255.255.255.240 Gotha(config-if)#clock rate 56000 Gotha(config-if)#no shutdown Gotha(config-if)#exit Gotha(config)#router rip Gotha(config-router)#version 2 Gotha(config-router)#network 209.165.201.0 Gotha(config-router)#network 192.0.2.176 Gotha(config-router)#no auto-summary Gotha(config-router)#end Gotha#copy run start
QUESTION 5
After adding TIS2 router, no routing updates are being exchanged between TIS1 and the new location. All other inter connectivity and Internet access for the existing locations of the company are working properly. The task is to identify the fault(s) and correct the router configuration to provide full connectivity between the routers. Access to the router CLI can be gained by clicking on the appropriate host. All passwords on all routers are cisco. IP addresses are listed in the chart below.
Click on host-G, complete the configration of the router in the pop-up CLI
******************************************************************************************* TISA# show run interface FastEthernet0/0
ip address 192.168.60.97 255.255.255.24
!
interface FastEthernet0/1
ip address 192.168.60.113 255.255.255.240
! interface Serial0/0 Ip address 192.168.36.14 255.255.255.252 Clockrate 64000 !
router eigrp 212
Network 192.168.36.0
Network 192.168.60.0
No auto-summary !
TISA# show ip route
192.168.36.0/30 is subnetted, 1 subnets
C 192.168.36.12 is directly connected, Serial0/0
192.168.60.0/24 is variably subnetted, 5 subnets, 2 masks
C 192.168.60.96/28 is directly connected, FastEthernet0/0
C 192.168.60.112/28 is directly connected, FastEthernet0/1
D 192.168.60.128/28 [ 90/21026560 ] via 192.168.36.13, 00:00:57, Serial0/0
D 192.168.60.144/28 [ 90/21026560 ] via 192.168.36.13, 00:00:57, Serial0/0
D 192.168.60.24/30 [ 90/21026560 ] via 192.168.36.13, 00:00:57, Serial0/0
D* 198.0.18.0 [ 90/21024000 ] via 192.168.36.13, 00:00:57, Serial0/0 ******************************************************************************************* TIS2# show run ! ! interface FastEthernet0/0 ip address 192.168.77.34 255.255.255.252 ! interface FastEtherner0/1 ip address 192.168.60.65 255.255.255.240 ! interface FastEthernet1/0 ip address 192.168.60.81 255.255.255.240 ! ! router eigrp 22 network 192.168.60.0 network 192.168.77.0 no auto-summary
TIS2# show ip route 192.168.60.0/28 is subnetted, 2 subnets C 192.168.60.80 is directly connected, FastEthernet1/0 C 192.168.60.64 is directly connected, FastEthernet0/1 192.168.77.0/30 is subnetted, 1 subnets C 192.168.77.32 is directly connected, FastEthernet0/0 ******************************************************************************************* TISB# show run
interface FastEthernet0/0
ip address 192.168.60.129 255.255.255.240 ! interface FastEthernet0/1 ip address 192.168.60.145 255.255.255.240 ! interface Serial0/1
ip address 192.168.60.26 255.255.255.252
router eigrp 212
network 192.168.60.0
network 192.168.60.0
TISB# show ip route
192.168.60.0/24 is variably subnetted, 5 subnets, 2 masks
C 192.168.60.24/30 is directly connected, Serial0/1
C 192.168.60.128/28 is directly connected, FastEthernet0/0
C 192.168.60.144/28 is directly connected, FastEthernet0/1
D 192.168.60.96/28 [ 90/21026560 ] via 192.168.60.25, 00:00:57, Serial0/1
D 192.168.60.112/28 [ 90/21026560 ] via 192.168.60.25, 00:00:57, Serial0/1
192.168.36.0/30 is subnetted, 1 subnets
D 192.168.36.12 [ 90/21026560 ] via 192.168.60.25, 00:00:57, Serial0/1
D* 198.0.18.0 [ 90/21024000 ] via 192.168.60.25, 00:00:57, Serial0/1 ********************************************************************************************************* TIS1# show run ! interface FastEthernet0/0 ip address 192.168.77.33 255.255.255.252 ! interface Serial1/0 ip address 198.0.18.6 255.255.255.0 ! interface Serial0/0 ip address 192.168.36.13 255.255.255.252 clockrate 64000 ! interface Serial0/1 ip address 192.168.60.25 255.255.255.252 clockrate 64000 ! ! router eigrp 212 network 192.168.36.0 network 192.168.60.0 network 192.168.85.0 network 198.0.18.0 no auto-summary ! ip classless ip default-network 198.0.18.0 ip route 0.0.0.0 0.0.0.0 198.0.18.5 ip http server
TIS1# sh ip route
192.168.36.0/30 is subnetted, 1 subnets
C 192.168.36.12 is directly connected, Serial0/0
192.168.60.0/24 is variably subnetted, 5 subnets, 2 masks
C 192.168.60.24/30 is directly connected, Serial0/1
D 192.168.60.128/28 [ 90/21026560 ] via 192.168.60.26, 00:00:57, Serial0/1 D 192.168.60.144/28
[ 90/21026560 ] via 192.168.60.26, 00:00:57, Serial0/1
D 192.168.60.96/28 [ 90/21026560 ] via 192.168.36.14, 00:00:57, Serial0/0 192.168.77.0/30 is subnetted,
1 subnets
C 192.168.77.32 is directly connected, FastEthernet0/0
C 198.0.18.0/24 is directly connected, Serial1/0
*S 0.0.0.0 via 198.0.18.5
A.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
Please input commands here: TIS2>enable TIS2#config t TIS2(config)#no router eigrp 22 TIS2(config)#router eigrp 212 TIS2(config-router)#network 192.16.60.0 TIS2(config-router)#network 192.16.77.0 TIS1>enable TIS1#config t TIS1(config)#router eigrp 212 TIS1(config-router)#network 192.16.77.0
QUESTION 6
Refer to the exhibit. Complete this network diagram by dragging the correct device name of description name or description to the correct location. Not all the names or descriptions will be used.
Select and Place:
Correct Answer: Section: (none) Explanation
Explanation/Reference:
This volume is part of the Exam Certification Guide Series from Cisco 640-802. Cisco 640-802 in this series provide officially developed exam preparation materials that offer assessment, review, and practice to help Cisco 640-802 Certification candidates identify weaknesses, concentrate their study efforts, and enhance their confidence as Cisco 640-802 exam day nears.
Exam A
QUESTION 1
Which statements are true about EIGRP successor routes? (Choose two.)
A. A successor route is used by EIGRP to forward traffic to a destination.
B. Successor routes are saved in the topology table to be used if the primary route fails.
C. Successor routes are flagged as “active” in the routing table.
D. A successor route may be backed up by a feasible successor route.
E. Successor routes are stored in the neighbor table following the discovery process.
Correct Answer: AD Section: A.) Objective Exams IExplanation
Explanation/Reference:
QUESTION 2
Refer to the diagram. All hosts have connectivity with one another. Which statements describe the addressing scheme that is in use in the network? (Choose three.)
A. The subnet mask in use is 255.255.255.192.
B. The subnet mask in use is 255.255.255.128.
C. The IP address 172.16.1.25 can be assigned to hosts in VLAN1
D. The IP address 172.16.1.205 can be assigned to hosts in VLAN1
E. The LAN interface of the router is configured with one IP address.
F. The LAN interface of the router is configured with multiple IP addresses.
Correct Answer: BCF Section: A.) Objective Exams I Explanation
Explanation/Reference:
QUESTION 3
Refer to the diagram. Which three statements describe the router port configuration and the switch port configuration as shown in the topology? (Choose three.)
A. The Router1 WAN port is configured as a trunking port.
B. The Router1 port connected to Switch1 is configured using subinterfaces.
C. The Router1 port connected to Switch1 is configured as 10 Mbps.
D. The Switch1 port connected to Router1 is configured as a trunking port.
E. The Switch1 port connected to Host B is configured as an access port.
F. The Switch1 port connected to Hub1 is configured as full duplex.
Correct Answer: BDE Section: A.) Objective Exams I Explanation
Explanation/Reference:
QUESTION 4
Which routing protocols will support the following IP addressing scheme? (Choose three.) Network 1 –
192.168.10.0 /26 Network 2 – 192.168.10.64 /27 Network 3 – 192.168.10.96 /27 Network 4 – 192.168.10.128 /30 Network 5 – 192.168.10.132 /30
A. RIP version 1
B. RIP version 2
C. IGRP
D. EIGRP
E. OSPF
Correct Answer: BDE Section: A.) Objective Exams IExplanation
Explanation/Reference:
QUESTION 5
Refer to the partial command output shown. Which two statements are correct regarding the router hardware? (Choose two.)
A. Total RAM size is 32 KB.
B. Total RAM size is 16384 KB (16 MB).
C. Total RAM size is 65536 KB (64 MB).
D. Flash size is 32 KB.
E. Flash size is 16384 KB (16 MB).
F. Flash size is 65536 KB (64 MB).
Correct Answer: CE Section: A.) Objective Exams I Explanation
Explanation/Reference:
QUESTION 6
The Ethernet networks connected to router R1 in the graphic have been summarized for router R2 as 192.1.144.0/20. Which of the following packet destination addresses will R2 forward to R1, according to this summary? (Choose two.)
A. 192.1.159.2
B. 192.1.160.11
C. 192.1.138.41
D. 192.1.151.254
E. 192.1.143.145
F. 192.1.1.144
Correct Answer: AD Section: A.) Objective Exams I Explanation
Explanation/Reference: QUESTION 7
The show interfaces serial 0/0 command resulted in the output shown in the graphic. What are possible causes for this interface status? (Choose three.)
A. The interface is shut down.
B. No keepalive messages are received.
C. The clockrate is not set.
D. No loopback address is set.
E. No cable is attached to the interface.
F. There is a mismatch in the encapsulation type.
Correct Answer: BCF Section: A.) Objective Exams I Explanation
Explanation/Reference:
QUESTION 8
Which of the following describe private IP addresses? (Choose two.)
A. addresses chosen by a company to communicate with the Internet
B. addresses that cannot be routed through the public Internet
C. addresses that can be routed through the public Internet
D. a scheme to conserve public addresses
E. addresses licensed to enterprises or ISPs by an Internet registry organization
Correct Answer: BD Section: A.) Objective Exams I Explanation
Explanation/Reference:
QUESTION 9
Refer to the exhibit. The network shown in the diagram is experiencing connectivity problems. Which of the following will correct the problems? (Choose two.)
A. Configure the gateway on Host A as 10.1.1.1.
B. Configure the gateway on Host B as 10.1.2.254.
C. Configure the IP address of Host A as 10.1.2.2.
D. Configure the IP address of Host B as 10.1.2.2.
E. Configure the masks on both hosts to be 255.255.255.224.
F. Configure the masks on both hosts to be 255.255.255.240.
Correct Answer: BD Section: A.) Objective Exams IExplanation
Explanation/Reference:
QUESTION 10
A network associate is trying to understand the operation of the FLD Corporation by studying the network in the exhibit. The associate knows that the server in VLAN 4 provides the necessary resources to support the user hosts in the other VLANs. The associate needs to determine which interfaces are access ports. Which interfaces are access ports? (Choose three.)
A. Switch1 – Fa 0/2
B. Switch1 – Fa 0/9
C. Switch2 – Fa 0/3
D. Switch2 – Fa 0/4
E. Switch2 – Fa 0/8
F. Router – Fa 1/0
Correct Answer: ACD
Section: A.) Objective Exams IExplanation
Explanation/Reference:
QUESTION 11
Refer to the exhibit. Which destination addresses will Host A use to send data to Host B? (Choose two.)
A. the IP address of Switch1
B. the IP address of Router1 Fa0/0
C. the IP address of HostB
D. the MAC address of Switch1
E. the MAC address of Router1 Fa0/0
F. the MAC address of HostB
Correct Answer: CE Section: A.) Objective Exams I Explanation
Explanation/Reference: