Get the newest free complete Fortinet NSE7_EFW-6.2 exam dumps! Go https://www.pass4itsure.com/nse7_efw-6-2.html (Q&As: 102 ). Best 100% valid up-to-date actual Fortinet NSE7_EFW-6.2 dumps that bring you the best results. You can get 100% free updates on Fortinet NSE7_EFW-6.2 practice test questions, Fortinet NSE7_EFW-6.2 pdf here.
Latest Fortinet NSE7_EFW-6.2 Exam Questions From Youtube
https://youtu.be/-kSg9jnShxM
New Fortinet NSE7_EFW-6.2 Practice Test Q1-Q13 Free
QUESTION 1 Examine the output of the `get router info bgp summary\\’ command shown in the exhibit; then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.) A. BGP state of the peer 10.125.0.60 is Established. B. BGP peer 10.200.3.1 has never been down since the BGP counters were cleared. C. Local BGP peer has not received an OpenConfirm from 10.200.3.1. D. The local BGP peer has received a total of 3 BGP prefixes. Correct Answer: AC
QUESTION 2 View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.
Why didn\\’t the tunnel come up? A. The pre-shared keys do not match. B. The remote gateway\\’s phase 2 configuration does not match the local gateway\\’s phase 2 configuration. C. The remote gateway\\’s phase 1 configuration does not match the local gateway\\’s phase 1 configuration. D. The remote gateway is using aggressive mode and the local gateway is configured to use man mode. Correct Answer: C
QUESTION 3 A FortiGate\\’s portal is connected to a private network. Its port2 is connected to the Internet. Explicit web proxy is enabled in port1 and only explicit web proxy users can access the Internet. Web cache is NOT enabled. An internal web proxy user is downloading a file from the Internet via HTTP. Which statements are true regarding the two entries in the FortiGate session table related to this traffic? (Choose two.) A. Both session have the local flag on. B. The destination IP addresses of both sessions are IP addresses assigned to FortiGate\\’s interfaces. C. One session has the proxy flag on, the other one does not. D. One of the sessions has the IP address of port2 as the source IP address. Correct Answer: AD
QUESTION 4 Examine the output of the `diagnose sys session list expectation\\’ command shown in the exhibit; then answer the question below.
Which statement is true regarding the session in the exhibit? A. It was created by the FortiGate kernel to allow push updates from FotiGuard. B. It is for management traffic terminating at the FortiGate. C. It is for traffic originated from the FortiGate. D. It was created by a session helper or ALG. Correct Answer: D
QUESTION 5 The logs in a FSSO collector agent (CA) are showing the following error: failed to connect to registry: PIKA1026 (192.168.12.232) What can be the reason for this error? A. The CA cannot resolve the name of the workstation. B. The FortiGate cannot resolve the name of the workstation. C. The remote registry service is not running in the workstation 192.168.12.232. D. The CA cannot reach the FortiGate with the IP address 192.168.12.232. Correct Answer: C https://kb.fortinet.com/kb/documentLink.do?externalID=FD30548 QUESTION 6 When does a RADIUS server send an Access-Challenge packet? A. The server does not have the user credentials yet. B. The server requires more information from the user, such as the token code for two-factor authentication. C. The user credentials are wrong. D. The user account is not found on the server. Correct Answer: B
QUESTION 7 Examine the output of the `get router info OSPF neighbor\\’ command shown in the exhibit; then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.) A. The interface ToRemote is OSPF network type point-to-point. B. The OSPF router with the ID 0.0.0.2 is the designated router for the ToRemote network. C. The local FortiGate is the backup designated router for the wan1 network. D. The OSPF routers with the IDs 0.0.0.69 and 0.0.0.117 are both designated routers for the wan1 network. Correct Answer: AC https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html
QUESTION 8 View the exhibit, which contains the output of a diagnose command, and then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.) A. FortiGate will probe 121.111.236.179 every fifteen minutes for a response. B. Servers with the D flag are considered to be down. C. Servers with a negative TZ value are experiencing a service outage. D. FortiGate used 209.222.147.3 as the initial server to validate its contract. Correct Answer: AD A ? because the flag is Failed so FortiGate will check if a server is available every 15 min D-state is I, contact to validate contract info
QUESTION 9 View the exhibit, which contains the output of a diagnose command, and answer the question below.
Which statements are true regarding the Weight value? A. Its initial value is calculated based on the round trip delay (RTT). B. Its initial value is statically set to 10. C. Its value is incremented with each packet lost. D. It determines which FortiGuard server is used for license validation. Correct Answer: C
QUESTION 10 An administrator has configured a dial-up IPsec VPN with one phase 2, extended authentication (XAuth) and IKE mode configuration. The administrator has also enabled the IKE real-time debug: diagnose debug application like-1 diagnose debug enable In which order is each step and phase displayed in the debug output each time a new dial-up user is connecting to the VPN? A. Phase1; IKE mode configuration; XAuth; phase 2. B. Phase1; XAuth; IKE mode configuration; phase2. C. Phase1; XAuth; phase 2; IKE mode configuration. D. Phase1; IKE mode configuration; phase 2; XAuth. Correct Answer: B https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-ipsecvpn-54/IPsec_VPN_Concepts/IKE_Packet_Processing.htm
QUESTION 11 What global configuration setting changes the behavior for content-inspected traffic while FortiGate is in the system conserve mode? A. av-failopen B. mem-failopen C. utm-failopen D. ips-failopen Correct Answer: A https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-security-profiles- 54/Other_Profile_Considerations/Conserve%20mode.htm
QUESTION 12 When using the SSL certificate inspection method to inspect HTTPS traffic, how does FortiGate filter web requests when the client browser does not provide the server name indication (SNI) extension? A. FortiGate uses the requested URL from the user\\’s web browser. B. FortiGate uses the CN information from the Subject field in the server certificate. C. FortiGate blocks the request without any further inspection. D. FortiGate switches to the full SSL inspection method to decrypt the data. Correct Answer: B
QUESTION 13 Which two tasks are automated using the Install Wizard on FortiManager? (Choose two.) A. Preview pending configuration changes for managed devices. B. Add devices to FortiManager. C. Import policy packages from managed devices. D. Install configuration changes to managed devices. E. Import interface mappings from managed devices. Correct Answer: AD https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device% 20Manager/1200_install_to%20devices/0400_Install% 20wizard-device%20settings.htm There are 4 main wizards: Add Device: is used to add devices to central management and import their configurations. Install: is used to install configuration changes from Device Manager or Policies and Objects to the managed devices. It allows you to preview the changes and, if the administrator doesn\\’t agree with the changes, cancel and modify them. Import policy: is used to import interface mapping, policy database, and objects associated with the managed devices into a policy package under the Policy and Object tab. It runs with the Add Device wizard by default and may be run at any time from the managed device list. Re-install policy: This is used to perform a quick install of the policy package. It doesn\\’t gives the ability to preview the changes that will be installed to the managed device.
Latest Fortinet NSE7_EFW-6.2 questions answers in order to lead every candidate towards a brighter and better future. Select https://www.pass4itsure.com/nse7_efw-6-2.html to get complete Fortinet NSE7_EFW-6.2 dumps practice exam questions and answers. Wish you success!
Get the newest free complete Fortinet NSE7_EFW-6.2 exam dumps! Go https://www.pass4itsure.com/nse7_efw-6-2.html (Q&As: 102 ). Best 100% valid up-to-date actual Fortinet NSE7_EFW-6.2 dumps that bring you the best results. You can get 100% free updates on Fortinet NSE7_EFW-6.2 practice test questions, Fortinet NSE7_EFW-6.2 pdf here.
Latest Fortinet NSE7_EFW-6.2 Exam Questions From Youtube
https://youtu.be/culjlbELPLI
New Fortinet NSE7_EFW-6.2 Practice Test Q1-Q13 Free
QUESTION 1 Which two statements about application layer test commands are true? (Choose two.) A. They are used to filter real-time debugs. B. They display real-time application debugs. C. Some of them can be used to restart an application. D. Some of them display statistics and configuration information about a feature or process. Correct Answer: CD
QUESTION 2 Refer to the exhibit, which contains the output of a web filtering diagnose command.
Which statement explains why the cache statistics are all zeros? A. The FortiGate web filter cache is disabled in the FortiGate configuration. B. FortiGate is using flow-based inspection which does not use the cache. C. The administrator has reallocated the cache memory to a separate process. D. There are no users making web requests. Correct Answer: A
QUESTION 3 Refer to the exhibit, which contains the partial output of an IKE real-time debug.
Why did the tunnel not come up? A. The pre-shared keys do not match B. The remote gateway phase 1 configuration does not match the local gateway phase 1 configuration. C. The remote gateway phase 2 configuration does not match the local gateway phase 2 configuration. D. The remote gateway is using aggressive mode and the local gateway is configured to use main mode. Correct Answer: B
QUESTION 4 What is the diagnose test application ipsmonitor 99 command used for? A. To enable IPS bypass mode B. To provide information regarding IPS sessions C. To disable the IPS engine D. To restart all IPS engines and monitors Correct Answer: D
QUESTION 5 When using the SSL certificate inspection method to inspect HTTPS traffic, how does FortiGate filter web requests when the client browser does not provide the server name indication (SNI) extension? A. FortiGate uses the requested URL from the user\\’s web browser. B. FortiGate uses the CN information from the Subject field in the server certificate. C. FortiGate blocks the request without any further inspection. D. FortiGate switches to the full SSL inspection method to decrypt the data. Correct Answer: B
QUESTION 6 Refer to the exhibit, which contains a partial output of an IKE real-time debug.
Based on the debug output, which phase-1 setting is enabled in the configuration of this VPN? A. auto-discovery-receiver B. auto-discovery-forwarder C. auto-discovery-sender D. auto-discovery-shortcut Correct Answer: B
QUESTION 7 Refer to the exhibit, which contains a TCL script configuration on FortiManager.
An administrator has configured the TCL script on FortiManager but failed to apply any changes to the managed device after being executed. Why did the TCL script fail to make any changes to the managed device? A. Changes in an interface configuration can only be done by CLI script. B. The TCL script must start with #include. C. Incomplete commands are ignored in TCL scripts. D. The TCL command run_cmd has not been created. Correct Answer: D
QUESTION 8 Which three conditions are required for two FortiGate devices to form an OSP adjacency? (Choose three.) A. OSPF costs match B. OSPF peer IDs match C. Hello and dead intervals match D. OSPF IP MTUs match E. IP addresses are in the same subnet Correct Answer: CDE
QUESTION 9
Refer to the exhibit, which contains a CLI script configuration on FortiManager. An administrator has configured the CLI script on FortiManager, which failed to apply any changes to the managed device after being executed. Why did the script not make any changes to the managed device? A. There is an existing route with a lower priority value. B. CLI scripts will add objects only if they are referenced by policies. C. Commands that start with the #sign are not executed. D. Static routes can only be added using TCL scripts. Correct Answer: C
QUESTION 10 Which configuration can be used to reduce the number of BGP sessions in an IBGP network? A. Next-hop-self B. Route reflector C. Neighbor group D. Neighbor range Correct Answer: B
QUESTION 11
Refer to the exhibit, which contains the output of a BGP debug command. Which statement explains why the state of the 10.200.3.1 peer is Connect? A. The local router has received the BGP prefixes from the remote peer. B. The local router is receiving the BGP keepalives from the peer, but it has not received a BGP prefix yet. C. The TCP session to 10.200.3.1 has not completed the 3-way handshake. D. The local router is receiving BGP keepalives from the remote peer, but the local peer has not received the OpenConfirm yet. Correct Answer: C
QUESTION 12 Which two statements about FortiManager are true when it is deployed as a local FDS? (Choose two.) A. It caches available firmware updates for unmanaged devices. B. It provides VM license validation services. C. It can be configured as an update server, or a rating server, but not both. D. It supports rating requests from both managed and unmanaged devices. Correct Answer: AB
QUESTION 13 Which two statements about bulk configuration changes using FortiManager CLI scripts are correct? (Choose two.) A. When executed on the Device Database, you must use the installation wizard to apply the changes to the managed FortiGate. B. When executed on the Policy Package, ADOM database, changes are applied directly to the managed FortiGate. C. When executed on the All FortiGate in ADOM, changes are automatically installed without creating a new revision history. D. When executed on the Remote FortiGate directly, administrators do not have the option to review the changes prior to installation. Correct Answer: AD
Latest Fortinet NSE7_EFW-6.2 questions answers in order to lead every candidate towards a brighter and better future. Select https://www.pass4itsure.com/nse7_efw-6-2.html to get complete Fortinet NSE7_EFW-6.2 dumps practice exam questions and answers. Wish you success!
Although life is an adventure, for the Fortinet NSE4_FGT-7.0 exam, I am afraid that no one is willing to take a risk. How did the Fortinet NSE4_FGT-7.0 exam pass without risk? This is what many test-takers want to ask. Pass4itSure Fortinet NSE4_FGT-7.0 dumps provide test takers with targeted training and high-quality practice, and the real question dumps are very similar to the real question exam to ensure that you pass smoothly.
Pass NSE4_FGT-7.0 with Fortinet NSE4_FGT-7.0 real dumps
Fortinet NSE 4 – FortiOS 7.0 – Exam series: NSE4_FGT-7.0. The number of questions: 60. Exam time: 105 minutes. Language: English and Japanese. Product version: FortiOS 7.0
Pass4itSure NSE4_FGT-7.0 dumps provide high-quality practice quizzes around real exam content in two formats (PDF and VCE) and are the best preparation for taking Fortinet NSE4_FGT-7.0 certification.
Pass4itSure NSE4_FGT-7.0 real dumps pdf, real NSE4_FGT-7.0 questions
Participate in free exercises to improve your exam skills, answers are at the end of the questions.
[1]
Which three pieces of information does FortiGate use to identify the hostname of the SSL server when SSL certificate inspection is enabled? (Choose three.)
A. The subject field in the server certificate B. The serial number in the server certificate C. The server name indication (SNI) extension in the client hello message D. The subject alternative name (SAN) field in the server certificate E. The host field in the HTTP header
When configuring a firewall virtual wire pair policy, which the following statement is true?
A. Any number of virtual wire pairs can be included, as long as the policy traffic direction is the same. B. Only a single virtual wire pair can be included in each policy. C. Any number of virtual wire pairs can be included in each policy, regardless of the policy traffic direction settings. D. Exactly two virtual wire pairs need to be included in each policy.
An administrator observes that the port1 interface cannot be configured with an IP address. What can be the reasons for that? (Choose three.)
A. The interface has been configured for a one-arm sniffer. B. The interface is a member of a virtual wire pair. C. The operation mode is transparent. D. The interface is a member of a zone. E. Captive portal is enabled in the interface.
The exhibit contains a network diagram, firewall policies, and a firewall address object configuration. An administrator created a Deny policy with default settings to deny Webserver access for Remote- user2. Remote-user2 is still able to access Webserver.
Which two changes can the administrator make to deny Webserver access for Remote-User2? (Choose two.)
A. Disable match-VIP in the Deny policy. B. Set the Destination address as Deny_IP in the Allow-access policy. C. Enable match VIP in the Deny policy. D. Set the Destination address as Web_server in the Deny policy.
[5]
Which certificate value can FortiGate use to determine the relationship between the issuer and the certificate?
A. Subject Key Identifier value B. SMMIE Capabilities value C. Subject value D. Subject Alternative Name value
[6]
Examine this PAC file configuration.
Which of the following statements are true? (Choose two.)
A. Browsers can be configured to retrieve this PAC file from the FortiGate. B. Any web request to the 172.25.120.0/24 subnet is allowed to bypass the proxy. C. All requests not made to Fortinet.com or the 172.25.120.0/24 subnet, have to go through altproxy.corp.com: 8060. D. Any web request fortinet.com is allowed to bypass the proxy.
[7]
Which two statements about antivirus scanning mode are true? (Choose two.)
A. In proxy-based inspection mode, files bigger than the buffer size are scanned. B. In flow-based inspection mode. FortiGate buffers the file, but also simultaneously transmits it to the client. C. In proxy-based inspection mode, antivirus scanning buffers the whole file for scanning, before sending it to the client. D. In flow-based inspection mode, files bigger than the buffer size is scanned.
[8]
What is the limitation of using a URL list and application control on the same firewall policy, in NGFW policy-based mode?
A. It limits the scope of application control to the browser-based technology category only. B. It limits the scope of application control to scan application traffic based on application category only. C. It limits the scope of application control to scan application traffic using parent signatures only D. It limits the scope of application control to scan application traffic on DNS protocol only.
[9]
If Internet Service is already selected as Source in a firewall policy, which other configuration objects can be added to the Source field of a firewall policy?
A. IP address B. Once Internet Service is selected, no other object can be added C. User or User Group D. FQDN address
Which of the following statements about central NAT are true? (Choose two.)
A. IP tool references must be removed from existing firewall policies before enabling central NAT. B. Central NAT can be enabled or disabled from the CLI only. C. Source NAT, using central NAT, requires at least one central SNAT policy. D. Destination NAT, using central NAT, requires a VIP object as the destination address in a firewall.
[11]
View the exhibit.
A user behind the FortiGate is trying to go to http://www.addictinggames.com (Addicting Games). Based on this configuration, which statement is true?
A. Addicting. Games are allowed based on the Application Overrides configuration. B. Addicting. Games are blocked on the Filter Overrides configuration. C. Addicting. Games can be allowed only if the Filter Overrides actions are set to Exempt. D. Addicting. Games are allowed based on the Categories configuration.
[12]
An administrator wants to configure timeouts for users. Regardless of the user\\’s behavior, the timer should start as soon as the user authenticates and expire after the configured value.
Which timeout option should be configured on FortiGate?
A. auth-on-demand B. soft-timeout C. idle-timeout D. new-session E. hard-timeout
Correct answer posted
1
2
3
4
5
6
7
8
9
10
11
12
BDE
A
ABC
AB
C
AD
CD
B
A
AB
A
E
Here is part of the free latest NSE4_FGT-7.0 PDF exam questions from Google Drive:
The success that NSE4_FGT-7.0 dumps brings to every test taker is real. No more taking risks. Dreams and hopes are important but more important are to practice and prove. To pass the exam successfully, you also need to practice the NSE4_FGT-7.0 exam questions a lot.
