If you are looking for a career change or looking to develop on Cisco CCNA, successfully passing the 200-301 exam is very valuable for you. In order to pass the exam smoothly. You can make a note of this. Must use the latest 200-301 exam dumps.
The Pass4itSure 200-301 exam dumps https://www.pass4itsure.com/200-301.html (365 days free access, price $49.99 – $59.99, PDF+VCE) exist the best way to successfully pass the exam.
Be very cautious and selective in selecting 200-301 exam dumps
With the popularity of Cisco CCNA certification, there are a large number of 200-301 exam dumps on the network, and the advantages and disadvantages coexist. Careful screening is required.
Pass4itSure 200-301 exam dumps are recommended. From the cost performance, content filtering is the first choice.
The Cisco Learning Network can be your primary source of exam preparation
The 200-301 CCNA Study Material page offers: https://learningnetwork.cisco.com/s/learning-plan-detail-standard?ltui__urlRecordId=a1c3i0000005hsQAAQ<ui__urlRedirect=learning-plan-detail-standard
Thorough practicing
Practice 200-301 exam questions is key to cracking the 200-301 exam. Gaining proficiency in the exam will prove to be very valuable.
Immerse yourself in exam preparation
Invest as much time as you can and don’t let your commitment waver. Once you pass the 200-301 exam, you’ll find that all your efforts are worth it.
3 tricks to get score well in Cisco 200-301 exam
For those who are struggling with the 200-301 exam, the key is not to study hard, my friend, the key is to study smart.
So, here are 3 tips to help us get better scores on the 200-301 exam.
- Don’t cram your studies.
While our long-term memory seems limitless, our brain’s short-term memory capacity is much smaller. This explains why “rote memorization” of information the night before the exam doesn’t work as well.
Studying for one to two hours at a time is easier to remember exam content and topics than overwork. It’s more important to understand.
- Learn to associate memories
Make up some relevant/interesting/practical analogies in your head. Like, don’t understand a concept? Break it down, simplify each word, and try to relate it to an actual example or something interesting in your head.
- Be calm and confident.
200-301 Free Exam Questions Answers [2023]
Last updated
| Last updated: |
| 200-301 free dumps |
Q1:
Which configuration command can you apply to an HSRP router so that its local interface becomes active if all other routers in the group fail?
A. no additional config is required
B. standby 1 track ethernet
C. standby 1 preempt
D. standby 1 priority 250
Correct Answer: A
Simply because that will be the default behavior routers would follow in the event all other routers in the HSRP group fail, then it would not keep attributes such as priority or preemption. What preemption does in summary is to make sure that the configured Priority on all routers within the same HSRP group is always respected.
That is, if R1 is configured on the HSRP group with a priority of 150 but he stands as active since all other routers currently subscribed to that group have a priority of 150, then will router will preempt the current active router and will take over hence becoming the new active router.
With preemption disabled, the new router does not preempt the current active router, unless routers in the group have to renegotiate their roles based on each router\’s priority at the time of negotiation.
Q2:
Which mode must be used to configure EtherChannel between two switches without using a negotiation protocol?
A. active
B. on
C. auto
D. desirable
Correct Answer: B
The Static Persistence (or “on” mode) bundles the links unconditionally and no negotiation protocol is used. In this mode, neither PAgP nor LACP packets are sent or received.
Q3:
A network engineer is implementing a corporate SSID for WPA3-Personal security with a PSK. Which encryption cipher must be configured?
A. CCMP128
B. GCMP256
C. CCMP256
D. GCMP128
Correct Answer: A
Q4:
Which purpose does a northbound API serve in a controller-based networking architecture?
A. facilitates communication between the controller and the applications
B. reports device errors to a controller
C. generates statistics for network hardware and traffic
D. communicates between the controller and the physical network hardware
Correct Answer: A
Q5:
Which technique can you use to route IPv6 traffic over an IPv4 infrastructure?
A. NAT
B. 6 to 4 tunneling
C. L2TPv3
D. dual-stack
Correct Answer: B
Q6:
What is the benefit of using private IPv4 addressing?
A. to enable secure connectivity over the Internet
B. to shield internal network devices from external access
C. to provide reliable connectivity between like devices
D. to be routable over an external network
Correct Answer: B
Q7:
When the active router in a VRRP group fails, which router assumes the role and forwards packets?
A. forwarding
B. standby
C. backup
D. listening
Correct Answer: C
Q8:
Refer to the exhibit.
A network engineer executes the show ip route command on router D. What is the next hop to network 192.168 1 0/24 and why?
A. The next hop is 10.0.2.1 because it uses distance vector routing
B. The next hop is 10.0.2.1 because it is a link-state routing protocol
C. The next hop is 10.0.0.1 because it has a better administrative distance
D. The next hop is 10.0.0.1 because it has a higher metric.
Correct Answer: B
Q9:
Which command enables a router to become a DHCP client?
A. ip address dhcp
B. ip dhcp client
C. ip helper-address
D. ip dhcp pool
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/12-4/dhcp-12-4-book/config-dhcp-client.html If we want to get an IP address from the DHCP server on a Cisco device, we can use the command “ip address dhcp”.
Q10:
Refer to the exhibit. Traffic that is flowing over interface TenGigabitEthernet0/0 experiences slow transfer speeds. What is the reason for the issue?
A. heavy traffic congestion
B. a duplex incompatibility
C. a speed conflict
D. queuing drops
Correct Answer: C
Q11:
DRAG DROP
Drag and drop the descriptions of IP protocol transmissions from the left onto the IP traffic types on the right.
Select and Place:
Correct Answer:
Q12:
A network architect is considering whether to implement Cisco DNA Center to deploy devices on a new network. The organization is focused on reducing the time it currently takes to deploy devices in a traditional campus design. For which reason would Cisco DNA Center be more appropriate than traditional management options?
A. Cisco DNA Center supports deployment with a single pane of glass.
B. Cisco DNA Center provides zero-touch provisioning to third-party devices.
C. Cisco DNA Center reduces the need for analytics on third-party access points and devices.
D. Cisco DNA Center minimizes the level of syslog output when reporting on Cisco devices.
Correct Answer: A
Q13:
Which technology must be implemented to configure network device monitoring with the highest security?
A. IP SLA
B. Syslog
C. NetFlow
D. SNMPv3
Correct Answer: D
Q14:
Which type of network attack overwhelms the target server by sending multiple packets to a port until the half-open TCP resources of the target are exhausted?
A. SYIM flood
B. reflection
C. teardrop
D. amplification
Correct Answer: A
Q15:
Refer to the exhibit.
After the election process, what is the root bridge in the HQ LAN?
Switch 1: 0C:E0:38:57:24:59 Switch 2: 0C:0E:15:22:1A:61 Switch 3: 0C:0E:15:1D:3C:9A Switch 4: 0C:E0:19:A1:4D:16
A. Switch 1
B. Switch 2
C. Switch 3
D. Switch 4
Correct Answer: C
Recent 200-301 dumps pdf online download: https://drive.google.com/file/d/1_cRoAyec2CHnwI5mExIJHV6REAbNOEyR/view?usp=share_link
Conclusion:
Prepare for the exam in the right way and don’t worry about failing. Pay attention to the points mentioned above. Get your Pass4itSure 200-301 exam dumps now https://www.pass4itsure.com/200-301.html Practice your exam with 1205 questions and reach proficiency to easily pass the Cisco CCNA 200-301 exam.