Welcome to download the newest Newcerts 350-060 VCE dumps: http://www.newcerts.com/350-060.html
Huawei SU0-224 exam will get as a single Huawei SU0-224 PDF or complete Huawei SU0-224 testing engine as well as over 1000 other technical exam PDF and exam engine downloads. Tired of choosing Huawei SU0-224 Configuration and Maintenance Exam material for preparing your Huawei SU0-224 exam, just come to Flydumps Huawei SU0-224 exam sample questions page for all the real Q&As. Flydumps Cisco experts and specialists have created 84 real Huawei SU0-224 exam Q&As for your learning. More, with our customers’ feedback, we have helped many candidates pass Huawei SU0-224 exam easily.
QUESTION 1
Which of the following statements about a Smart Link group are true?
A. Smart Link group consists of a maximum of two interfaces. Where there are two interfaces, one is an active interface, and the other a standby interface.
B. Of the two interfaces in a Smart Link group, one is active, and the other is standby.
C. When an active interface goes Down, the Smart Link group automatically blocks it and changes the status of the standby interface to active.
D. When an active interface recovers, the standby interface is blocked and traffic is switched back to the active interface.
Correct Answer: ABC
QUESTION 2
Which of the following statements about Flush packets in a Smart Link group are true?
A. A Smart Link group sends Flush packets to instruct other devices to update the address table.
B. Flush packets use IEEE 802. 3 encapsulation*
C. The destination MAC address of Flush packets is an unknown unicast address, which is used to distinguish protocols.
D. The destination MAC address of Flush packets is a special multicast address, which is used to distinguish protocols.
Correct Answer: ABC
QUESTION 3
When links are switched in a Smart Link group, which of the following mechanisms can be used to refresh MAC and ARP entries?
A. MAC and ARP entries are refreshed automatically with respect to traffic.
B. The Smart Link group uses a new link to send Flush packets.
C. MAC entries are refreshed after the aging time expires.
D. ARP entries are refreshed after the aging time expires
Correct Answer: ABC
QUESTION 4
Which of the following statements about link aggregation are true?
A. link aggregation binds a group of physical interfaces together as a logical interface to increase the bandwidth and reliability.
B. Link aggregation complies with IEFE 802. 3ah.
C. The logical link formed by bundling multiple physical links together is called a link aggregation group (IAG) or atrunk.
D. Active and inactive interfaces exist in link aggregation. Active interfaces forward data, whereas inactive interfaces do not.
Correct Answer: ABCD
QUESTION 5
Which of the following statements about link aggregation are true?
A. link aggregation can be performed in manual load balancing or LACP mode. In manual loading balancing mode, LACP is disabled; in I.ACP mode, LACP is enabled.
B. In manual load balancing mode, all active member interfaces forward data and perform load balancing.
C. In static LACP mode, the creation of the Eth-Trunk and the addition or member interfaces to the Eth-Trunk are performed manually. Compared with link aggregation in manual load balancing mode, active interfaces in static LACP mode are selected by sending I.ACP Data Units (LACPDUs).
D. In dynamic LACP mode, the creation of the Eth-Trunk, the addition of member interfaces, and the selection of active interfaces are performed based on LACP negotiation.
Correct Answer: ABCD
QUESTION 6
Which of the following statements about LACP are true?
A. It complies with IEEE 802. 3ad.
B. A device enabled with LACP exchanges Link Aggregation Control Protocol Data Units (LACPDUs) with its peer.
C. Devices at both ends determine the active interface according to the interface priority of the active device.
Correct Answer: ABC
QUESTION 7
Which of the following reliability designs are related to routers?
A. Reliability design of the system and hardware
B. Reliability design of the software
C. Reliability test authentication
D. Reliability design of the lP network
Correct Answer: ABCD
QUESTION 8
Which of the following can speed up OSPF fast convergence?
A. Configuring dynamic BFD for OSPF
B. Adjusting the interval at which OSPF calculation is performed
C. Configuring the interval at which an LSA are retransmitted
D. Configuring the maximum number of external LSAs in the LSDB
Correct Answer: AB
QUESTION 9
When the GR Restarter performs the active/standby switchover, the neighbor performs which of the following operations when detecting that a TCP disconnection?
A. Keeping the routing tables of various address families advertised by the GR Restarter during negotiation, marking entries in these tables with stale tags, and starting a stale timer
B. Starting a restart timer.
C. Clearing all routing entries and forwarding entries related to the GR restarter if the GR restarter fails to re-establish the BGP connection with the neighbor after the restart timer expires.
D. Remaining the neighbor relationship unchanged.
Correct Answer: ABC QUESTION 10
RTA connected to a LAN by e0/0 whose IP address is 10. 1. 1. 251 and network Mask is 255.
255. 255. 0. Now
create a virtual router with ID I and virtual IP address 10.1.1.254 0n RTA.
Which of the following commands are correct?
A. [RTA-Ethernet0/0]vrrp vrid l virtual-ip 10. 1. 1. 254
B. [RTA]vrrp vrid I virtual-ip 10. 1. 1. 254
C. ERTA-Ethernet0/0]vrrp vrid l virtual-ip 10. 1. 1. 254 mask 255. 255. 255. 0
D. [RTA]vrrp vrid l virtual-ip 10. 1. 1. 254 mask 255. 255. 255. 0
Correct Answer: A QUESTION 11
Which of the following statements about IACP are true?
A. It complies with IEEE 802. 3ad.
B. A device enabled with LACP exchanges Link Aggregation Control Protocol Data Units (LACPDUs) with its peer.
C. Devices at both ends determine the active interface according to the interface priority of the active device.
Correct Answer: ABC QUESTION 12
Which of the following statements about the reliability requirement level are true?
A. Faults seldom occur in the system software or hardware.
B. System functions are not affected by faults.
C. System functions are affected by faults but can rapidly recover.
D. System functions can be ensured by using redundancy design, switchover policy, and high success rate in switchover.
Correct Answer: ABCD
QUESTION 13
Which of the following are end-to-end link protection modes?
A. 1:1
B. M: N
C. N: 1
D. 1+1
Correct Answer: ABD QUESTION 14
On a BGP/MPLS IPv4 VPN, OSPF, LDP, and static routes are configured. Which of the following protocols need to be enabled with GR to achieve NSF on PEs?
A. OSPF
B. MPLS LDP
C. BGP
D. Static routes
Correct Answer: ABC QUESTION 15
In VRP 5.7, which of the following dynamic protocols support GR?
A. MPLS LDP/RSVP
B. IS-IS/OSPF
C. BGP
D. MSTP
Correct Answer: ABC QUESTION 16
Which of the following statements about BFD are true?
A. It cannot be used to detect MPLS networks.
B. It provides low-load and short-duration detection for paths between adjacent forwarding engines.
C. It provides a unified mechanism for detecting all types of media and BFD-supporting protocols.
D. It is a bidirectional detection mechanism.
Correct Answer: BCD QUESTION 17
Which of the following statements about the setup of a BFD session are true?
A. A BFD session can be set up in either static or dynamic mode.
B. A static BFD session is set up by manually configuring BFD session parameters and delivering requests for setting up a BFD session. BFD session parameters include the local and remote discriminators.
C. A dynamic BFD session is set up by dynamically allocating local discriminators.
D. Static and dynamic E3FD sessions are not differentiated.
Correct Answer: ABC QUESTION 18
How many hosts are available per subnet if apply a /21 mask to the class B network?
A. 510
B. 512
C. 1022
D. 2046
Correct Answer: D QUESTION 19
For a network like 175.25.128.0/19, the mask value is?
A. 250. 255. 0. 0
B. 200. 205. 224. 0
C. 250. 255. 24. 0
D. Different based on the address type
Correct Answer: B QUESTION 20
The network 154.27.0.0 without any subnet can support ( ) hosts?
A. 204
B. 1024
C. 65, 534
D. 16, 777, 206
Correct Answer: C
Huawei SU0-224 practice test are the latest version in the world market. When you go to the testing room to take real Huawei SU0-224 exam, you will find all the actual questions are in FLYDUMPS Huawei SU0-224 practice test. FLYDUMPS’S experts have years of experience on training IT examinees. Both PDF and test engine are provided by FLYDUMPS’S experts for Huawei SU0-224 Certified Specialist training. If you want to print out to read all the Huawei SU0-224 questions and answers anywhere, Huawei SU0-224 PDF version is your best choice. If you want to practice the Huawei SU0-224 exam in a real environment similar to the actual test, try Huawei SU0-224 test engine now.
Welcome to download the newest Newcerts 350-060 VCE dumps: http://www.newcerts.com/350-060.html
Huawei SU0-224 Study Guide Download, 100% Success Rate Huawei SU0-224 Free Test Online