Cisco 642-176 contains a powerful new testing engine that allows you to focus on individual topic areas or take complete, timed exams from Cisco 642-176.The assessment engine also tracks your performance and presents feedback on a module-by-module basis, providing question-by-question Cisco 642-176 to the text and laying out a complete study plan for review.Cisco 642-176 also includes a wealth of hands-on practice exercises and a copy of the Cisco 642-176 network simulation software that allows you to practice your Cisco 642-176 hands-on skills in a virtual lab environment.The Cisco 642-176 supporting website keeps you fully informed of any exam changes
Exam A QUESTION 1
Exhibit:
You work as a network technician at Certkiller .com. Please study the exhibit carefully. Which three of these are accurate description of values that you will find in the verified column for different types of products? ( Choose three.)
A. If the solution is configured and orderable, a check mark will be displayed.
B. If the configuration is incomplete, the words “Not Configured” will be displayed
C. If the part is a non-configurable part, the words “Not configurable” will be displayed
D. If the solution is not orderable, a check mark will be displayed
E. If the configuration is complete, the word Done will be displayed
F. If the solution is not configured, a check mark will be displayed
Correct Answer: ABC Section: (none) Explanation
Explanation/Reference:
QUESTION 2
Which routing method is used to determine the forwarding paths for IP traffic in a Secure Cisco Single-Site Network foundation solution with remote teleworkers?
A. RIP
B. EIGRP
C. OSPF
D. Static and default routes
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 3
Exhibit:
You work as a network technician at Certkiller .com. Please study the exhibit carefully. In a Cisco Single-
Site Secure Network foundation implementation, which factors affect the router configuration you select?
Exhibit: image027.jpg
A. Maximum number of supported IP Phones per platform
B. Type of security scheme that is to be implemented
C. Maximum Amount of packet latency acceptable
D. Type of QoS scheme hat is being used
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 4
DRAG DROP
You work as a network technician at Certkiller .com. Your boss, Mrs. Certkiller, is interested in WAN
Services.
Match the appropriate WAN Services with the correct service type.
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference: QUESTION 5
The recommended WAN Access method for a simplified and cost effective Cisco Single-site Secure Network Foundation Deployment provides which type of Service?
A. Low Latency
B. Best-Effort
C. Guaranteed Quality
D. Guaranteed Bandwidth
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 6
You are designing a solution that needs to support 30 IP phone users. Which switch model and how many switches does the Cisco Single-Site Secure Network Foundation1.1 Desing and Implementation Guide suggest for the solution?
A. 1 Catalyst Express 500G-12TC,1 Catalyst 3750G-12S-S
B. 1 Catalyst 3750G-12S-S, 1 Catalyst Express 500-24PC
C. 2 Catalyst Express 500G-12TC
D. 1 Catalyst 3750G-12S-S, 1 Catalyst Express 500-24PC
E. 2 Catalyst Express 500-24PC
F. 2 Catalyst 3750G-12S-S
Correct Answer: E Section: (none) Explanation
Explanation/Reference:
QUESTION 7
Exhibit: You work as a network technician at Certkiller .com. Please study the exhibit carefully. All of the computing devices shown are on the same logical network, as if they were all connected to the same switch. Which two features make this possible? ( Choose two.)
A. PAT
B. 802.1Q
C. Spanning-tree
D. VLANs
E. QoS
Correct Answer: BD Section: (none) Explanation
Explanation/Reference:
QUESTION 8
If voice and data traffic will be sent and received via a WAN links, what must be configured to provide a certain amount of dedicated bandwidth and to prioritize the voice traffic over other types of network traffic?
A. IPSec VPN
B. QoS mechanism
C. Firewall
D. NAT
E. EIGRP routing protocol
F. Static routing
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
Cisco 642-176 Interconnecting Cisco Networking Devices Part 1 (ICND1) exam is the exam associated with the Cisco Certified Entry Network Technician (CCENT) certification and is a tangible first step in achieving an Associate-level certification Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 1 (ICND1) course. This exam tests a candidate’s knowledge and skills required to successfully install, operate, and troubleshoot a small branch office network. The exam includes topics on the operation of IP data networks, LAN switching technologies, IPv6, IP routing technologies, IP services (DHCP, NAT, ACLs), network device security, and basic troubleshooting
QUESTION 9
DRAG DROP
You work as a network technician at Certkiller .com. Your boss, Mrs. Certkiller, is interested in UTP
categories.
Match the appropriate environments with the correct UTP category.
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference: QUESTION 10
You are designing a solution that needs to support a full-rate T3 connection. Which router model does the Cisco Single-Site Secure Network Foundation 1.1 Design and Implementation Guide suggest for this solution?
A. Cisco 2821
B. Cisco 2811
C. Cisco 3845
D. Cisco 2801
E. Cisco 2851
F. Cisco 3825
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 11
When resetting a Catalyst Express switch to factory default settings, which three options are available from the Software Recovery window? (Choose three.)
A. Boot to a password recovery window
B. Boot with the factory default image
C. Erase the system configuration and boot with the factory default IOS image
D. Erase the system configuration and boot from a TFTP-supplied IOS image
E. Erase the System Configuration
Correct Answer: BCE Section: (none) Explanation
Explanation/Reference: QUESTION 12
Which statement correctly describes network security settings in Cisco Network Assistant for the Catalyst Express 500 Switch?
A. The LOW setting enables broadcast storm control, but has no effect on the number of devices that can connect to a switch port
B. The LOW setting enables broadcast storm control and limits the number of devices that can connect to a switch port.
C. The LOW setting disables broadcast storm control but limits the number of devices that can connect to a switch port
D. The default network setting is “HIGH”
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 13
In an environment in which multiple VLANs have been defined on Catalyst Express 500 switches, which two statements are correct for ports that have been configured with the Smartport role of “IP Phone + Desktop”? (Choose two.)
A. The names of the VLANs used by the SmartPorts are case insensitive
B. The ports may belong to a configurable data VLAN
C. The names of the VLANs used by the Smartports are not relevant
D. The ports may belong to many VLANs, depending on how many PCs are connected to each port.
E. The names of the VLANs used by the Smartports are case sensitive
Correct Answer: BE Section: (none) Explanation
Explanation/Reference:
QUESTION 14
DRAG DROP You work as a network technician at Certkiller .com. Your boss, Mrs. Certkiller, is interested in SMB wireless solutions. You are required to produce the correct order for performing a Technology Strategy Development. Choose only steps that apply.
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference:
QUESTION 15
Exhibit: You work as a network technician at Certkiller .com. Please study the exhibit carefully. Which Cisco SDM Configuration task would you use to enable access and inspection rules on the WAN interface, preventing any external traffic from entering the network unless that traffic is a reply to a session that originated in the internal network?
A. Additional Task
B. Interface and Connections
C. Routing
D. NAT
E. Firewall and ACL
F. VPN
Correct Answer: E Section: (none) Explanation
Explanation/Reference:
QUESTION 16
When enabling IPS on an ISR using the Cisco SDM IPS Wizard, in what location can the SDF be placed?
A. On the RAM of the ISR
B. On the USB memory stick of the ISR
C. On the NVRAM of the ISR
D. On the IPS Module of the ISR E. On the Flash memory of the ISR
Correct Answer: E Section: (none) Explanation
Explanation/Reference:
QUESTION 17
During which phase of the Steps to Success methodology for Cisco SMB Security Solutions would the Security Technology Requirements document be used to determine a customer’s security requirements?
A. Perform
B. Position
C. Develop
D. Prepare
E. Plan
F. Design
Correct Answer: E Section: (none) Explanation
Explanation/Reference:
QUESTION 18
Exhibit:
You work as a network technician at Certkiller .com. Please study the exhibit carefully. The exhibit is an example of which technology being implemented?
A. Spanning-tree
B. 802.1Q
C. VLANs
D. PAT
E. QoS
Correct Answer: D Section: (none)
Explanation
Explanation/Reference: QUESTION 19
Exhibit:
You work as a network technician at Certkiller .com. Please study the exhibit carefully. Which two statements correctly identify the reasons why there is only one static route and there are no dynamic protocols for the configuration shown?(Choose two.)
A. The configuration has not been completed yet on the router
B. There is only one entry and exit path to the service provider, so one static route is sufficient
C. The LAN functions at L3, so dynamic routing does not need to be enabled
D. Switch Agg 1 and R1 have not achieved L3 adjacency yet, thus whatever routing protocol has been configuration on R1 is not completely up
E. There is only one L3 device, thus dynamic routing is not needed
Correct Answer: BE Section: (none) Explanation
Explanation/Reference:
QUESTION 20
During which phase of the steps to success methodology for Cisco SMB security solutions would the Network Readiness Assessment be used to assess the readiness of an existing network infrastructure and determine which, if any, modification should be made prior to implementation?
A. Position
B. Prepare
C. Design
D. Perform
E. Plan
Correct Answer: E Section: (none) Explanation
Explanation/Reference:
QUESTION 21
When determining a customer’s security requirements using the security site survey from the steps for success methodology, which three of theses should be included in the customer’s security policy and procedures? (Choose three.)
A. Third-party due diligence policy review
B. Remote Access Policy
C. Encryption Policy
D. Application change control policy
E. Security Personnel policy
Correct Answer: ABD Section: (none) Explanation
Explanation/Reference:
QUESTION 22
DRAG DROP You work as a network technician at Certkiller .com. Your boss, Mrs. Certkiller, is interested network security mechanisms. You are required to match the correct mechanism with the proper description.
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference: QUESTION 23
DRAG DROP You work as a network technician at Certkiller .com. Your boss, Mrs. Certkiller, is interested Success Methodology phases steps. You are required to produce the correct in which the appropriate phases takes place Use only steps that apply.
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference:
QUESTION 24
When using the steps to success methodology, where does Quote Builder fit into the deal process flow?
A. It encompasses the validate and solve steps
B. It encompasses the Discovery, Validate and Solve steps
C. It encompasses the Discover, Validate, Solve and Present Steps
D. It encompasses the Discovery, Solve and Close steps
E. It encompasses the Discovery, Validate and Present Steps
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 25
Which three of these pre-requisite for resetting a Catalyst Express 500 switch when Cisco Network Assistant is unavailable? (Choose three.)
A. At Least one enabled switch port that is unconnected to any device
B. A PC pre-configured with a specific IP Address and Mask
C. A PC or laptop with Windows 2000 or Windows XP installed and a web browser that has Java Script enabled
D. Physical Access to Switch
E. A Switch with no connected devices
Correct Answer: ACD Section: (none) Explanation
Explanation/Reference:
QUESTION 26
To protect the network from external and internal threats, where should Cisco IPS be enabled on an ISR?
A. Globally on the ISR
B. On the Console and Auxiliary Ports of the ISR
C. On the untrusted (Outside) interface of the ISR
D. On the trusted (Inside) interface of the ISR
E. On the WAN and LAN interfaces of the ISR
Correct Answer: E Section: (none) Explanation
Explanation/Reference:
QUESTION 27
Which two WAN access methods are specified for a simplified and cost-effective Cisco Single-Site Secure Network Foundation Deployment Design? (Choose two.)
A. Frame-Relay
B. Leased Line
C. MPLS
D. DSL
E. Cable
F. Wireless
Correct Answer: DE Section: (none) Explanation
Explanation/Reference:
QUESTION 28
DRAG DROP
You work as a network technician at Certkiller .com. Your boss, Mrs. Certkiller, is interested in WAN
devices.
Match the appropriate WAN device with the correct description.
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference:
QUESTION 29
DRAG DROP
You work as a network technician at Certkiller .com. Your boss, Mrs. Certkiller, is interested in port types.
Match the appropriate port type with the correct function.
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference: QUESTION 30
During which phase of the steps to success methodology for Cisco SMB Security Solutions would the Network Readiness Assessment be used to assess the readiness of an existing network infrastructure and determine which, if any modification should be prior to implementation?
A. Prepare
B. Design
C. Position
D. Develop
E. Plan
F. Perform
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 31
Exhibit.
Please study the exhibit.
Which Cisco SDM configuration task is used to enable the translation of the inside network private IP
address to the public IP address?
A. Firewall and ACL
B. NAT
C. Routing
D. Interface and connections
E. VPN
F. Security Audit
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 32
Please study the exhibit.
What are two options available when using the Security Audit Configuration task in Cisco SDM? ( Choose two.)
A. Perform a One-step lockdown on the Router
B. Perform a Virus Scan
C. Perform a Secure audit on the Router
D. Perform a Denial Of Service attack on the Router to verify that it is protected
E. Perform a real-time inspection of incoming traffic destined for the router
Correct Answer: AC Section: (none) Explanation
Explanation/Reference:
QUESTION 33
When determining a customer’s technical requirements for a Cisco Unified Communications solution, which important tool can be used to determine the bandwidth used by different codecs with various protocols over different media?
A. Network Codec Aggregator Tool
B. Bandwidth Estimator Tool
C. Unified Communication Bandwidth Tool
D. Voice Bandwidth Calculator
E. Voice Codec Bandwidth Calculator
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 34
Exhibit:
You work as a network technician at Certkiller .com. Please study the exhibit carefully. What does “locking Down” the router entail?
A. Disabling HTTPS access to Cisco SDM
B. Prohibiting console access to Router
C. Preventing any alterations to the router’s running configuration
D. Disabling all vulnerable Services on the Router
E. Shutting down all the router’s interfaces
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 35
Your Customer has 21 users, each requiring both PC and IP Phone connectivity. Which is the correct configuration for this customer?
A. 1 Cisco 2811 ISR, 1 Catalyst Express 500G-12TC, 2 Catalyst Express 500-24PC
B. 1 Cisco 2851 ISR, Catalyst Express 500G-12TC, 3 catalyst Express 500-24PC
C. 1 Cisco 2821 ISR, Catalyst Express 500G-12TC, 2 Catalyst Express 500-24PC
D. 1 Cisco 2801 ISR, 1 Catalyst Express 500-24PC
Correct Answer: D Section: (none) Explanation
Explanation/Reference: QUESTION 36
When using Cisco Network Assistant to configure a WS-CE500-24LC switch, which three are available choices in the port settings window? (Choose three.)
A. Duplex mode selections
B. Auto MDIX selections
C. Status Selections
D. Group mode selections
E. Port security selections
Correct Answer: ABC Section: (none) Explanation
Explanation/Reference:
QUESTION 37
Which statements describes the remote sites in a Cisco Single-Site Secure Network Foundation solution with remote teleworkers?
A. They are separate from the central site and use NAT to route through the Internet to the Central Site
B. They are part of the VLANs at the Central Site; they are in the same subnets
C. They use public IP Addresses that are routable through the Internet
D. They are in separate subnets but are part of the private address space of the network
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 38
Which two statements about 802.1Q trunking in Secure Network Foundation Design Guide for Single Site Deployments are correct?
A. The Cisco Control VLAN carries only Layer 2 control traffic
B. 802.1Q trunking is used between the access switch and the router
C. There is no 802.1Q trunking used in these designs
D. When 802.1Q trunks are configured, they are also called Native VLANs
E. Trunking Ensures that traffic from only one VLAN is carried on that trunk
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 39
Exhibit: You work as a network technician at Certkiller .com. Please study the exhibit carefully. Which Cisco SDM configuration task would you select to configure a static route to the Service Provider?
A. NAC
B. Routing
C. Intrusion Protection
D. Quality Of Service
E. NAT
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 40
Which WAN connection requires a different interface than the standard interface provided in the Cisco Single-Site Secure Network Foundation deployment design?
A. Metro Ethernet
B. DSL
C. VPN
D. Cable
E. Frame-Relay
Correct Answer: E Section: (none) Explanation
Explanation/Reference:
CCNA Cisco 642-176 Exam Certification Guide is part of a recommended study program from Cisco 642-176 that includes simulation and hands-on training from authorized Cisco 642-176 Learning Partners and self-study products from Cisco 642-176.Find out more about instructor-led, e-learning, and hands-on instruction offered by authorized Cisco 642-176 Learning Partners worldwide