Welcome to download the newest Examwind JN0-360 dumps:
Each Answers in CheckPoint 156-210 study guides are checked by the concerned professional to provide you the best quality dumps. If you are looking to get certified in short possible time, you will never find quality product than Flydumps.
QUESTION 127
As a firewall administrator you encounter the following you error message:
Authentication for command failed.
What is the most logical reasoning for thus type of error message?
A. The Rule Base has been corrupted.
B. The kernel cannot communicate with the management module.
C. The administrator does not have the ability to push the policy.
D. Remote encryption keys cannot be fetched.
E. Client authentication has failed.
Correct Answer: B
QUESTION 128
Your customer has created a rule so that every time a user wants to go to the Internet, that user must be authenticated. Firewall load is a concern for the customer. Which authentication method does not result in any additional connections to the firewall?
A. Session
B. User
C. Client
D. Connection
E. None of the above.
Correct Answer: A
QUESTION 129
What variable is used to extend the interval of the Timeout in a NAT to prevent a hidden UDP connection from losing its port?
A. Fwx_udp_todefaultextend.
B. Fwx_udp_expdefaultextend.
C. Fwx_udp_todefaultext
D. Fwx_udp_timeout.
E. Fwx_udp_expiration.
Correct Answer: D
QUESTION 130
To hide data filed in the log viewer:
A. Select Hide from the Log Viewer menu.
B. Right-click anywhere in a column of the Log Viewer GUI and select Show Details.
C. Right-click anywhere in the column of the Log Viewer GUI and select Disable.
D. Right-click anywhere in the column of the Log Viewer GUI and select Hide.
E. Select Hide from the Log Viewer tool bar.
Correct Answer: D
QUESTION 131
You are following the procedure to setup user authentication for TELNET to prompt for a distinct destination. This allows the firewall to simulate a TELNET Proxy. After you defined the user on the Firewall and use VPN-1/FireWall-1 Authentication, you would:
A. Stop the Firewall.
B. Restart the Firewall.
C. Start the Policy Editor and go to Manage service, and edit TELNET service.
D. Ensure that the Authentication method is enabled in the firewall object.
E. Ensure that there are no existing rules already allowing TELNET.
Correct Answer: D
QUESTION 132
You have the VPN-1/Firewall-1 NG product installed. The following Rule Base order correctly implements Implicit Client Authentication fort HTTP. No. SOURCE DESTINATION SERVICE ACTION 1 All *Any TCP ftp User Auth Users@localnet 2 All Users@localnet *Any TCP http User Auth
A. True
B. False
Correct Answer: B
QUESTION 133
What is the software package through which all Check Point products use infrastructure services?
A. Cpstart/cpstop.
B. Check Point Registry.
C. CPD
D. Watch Dog for critical services.
E. SVN Foundation.
Correct Answer: E
QUESTION 134
Choose the BEST response to finish this statement. A Firewall:
A. Prevents unauthorized to or from a secured network.
B. Prevents unauthorized to or from a unsecured network.
C. Prevents authorized access to or from an Intranet.
D. Prevents authorized access to or from an Internet.
E. Prevents macro viruses from infecting the network.
Correct Answer: A
QUESTION 135
Where is the external if file located in VPN1/Firewall-1 NG?
A. FWDIR conf directory.
B. Database directory.
C. State directory.
D. Temp Directory.
E. Not used in VPN1/Firewall-1 NG.
Correct Answer: E
QUESTION 136
Which log viewer mode allows you to actually see the contents of the files HTTP-ed by the corporation’s Chief Executive Officer?
A. Security Log.
B. Active Connections Log.
C. Accounting Log.
D. Administrative Log.
E. None of the above.
Correct Answer: E
QUESTION 137
When you select the alert radio button on the topology tab of the interface properties window:
A. The action specified in the Action element of the Rule Base is taken.
B. The action specified in the Anti-Spoofing Alert field in the Global properties window is taken.
C. The action specified in the Pop up Alter Command in the Global properties window is taken.
D. Both A and B.
E. Both B and C.
Correct Answer: E
QUESTION 138
You are the firewall administrator with one management server managing one firewall. The system status displays a computer icon with a ‘!’ symbol in the status column. Which of the following is the most likely cause?
A. The destination object has been defined as external.
B. The Rule Base is unable to resolve the IP address.
C. The firewall has been halted.
D. The firewall is unprotected, no security policy is loaded.
E. Nothing is wrong.
Correct Answer: D
QUESTION 139
System Administrators use session authentication when they want users to:
A. Authenticate each time they use a supported service.
B. Authenticate all services.
C. Use only TENET, FTP, RLOGIN, and HTTP services.
D. Authenticate once, and then be able to use any service until logging off.
E. Both B and D
Correct Answer: B
QUESTION 140
Your customer has created a rule so that every time a user wants to go to Internet, that user must be authenticated. The customer requires an authentication scheme that provides transparency for the user and granular control for the administrator. User must also be able to log in from any location. Based on this information, which authentication schemes meets the customer’s needs?
A. Session
B. User
C. Client
D. Dual
E. Reverse
Correct Answer: B QUESTION 141
Implementing Dynamic NAT would enable an internal machine behind the firewall to act as an FTP Server for external clients.
A. True
B. False
Correct Answer: B QUESTION 142
The Enforcement Module (part if the VPN-1/FireWall-1 Module):
A. Examines all communications according to an Enterprise Security Policy.
B. Is installed on a host enforcement point.
C. Can provide authentication and Content Security features at the application level.
D. Us usually installed on a multi-homed machine.
E. All of the above.
Correct Answer: E QUESTION 143
In most cases when you are building the Rule Base you should place the Stealth Rule above all other rules except:
A. Clean up rules.
B. Implicit Riles.
C. Client Authentication Rules.
D. Pseudo Rules.
E. Default Rules.
Correct Answer: C QUESTION 144
If you change the inspection order of any of the implied rules under the Security Policy Setup, does it change the order in which the rules are enforced?
A. True
B. False
Correct Answer: A QUESTION 145
The fw fetch command allows an administrator to specify which Security Policy a remote enforcement module retrieves.
A. True
B. False
Correct Answer: A
QUESTION 146
You can edit VPE objects before they are actualized (translated from virtual network objects to real).
A. True
B. False.
Correct Answer: B
QUESTION 147
Stateful inspection is a firewall technology introduced in Checkpoint VPN-1/Firewall-1 software. It is designed to meet which if the following security requirements?
1.
Scan information from all layers in the packet.
2.
Save state information derived from previous communications, such as the outgoing Port command of an FTP session, so that incoming data communication can be verified against it.
3.
Allow state information derived from other applications access through the firewall for authorized services only, such as previously authenticated users.
4.
Evaluate and manipulate flexible expressions based on communication and application derived state information.
A. 1, 2, 3
B. 1, 3, 4
C. 1, 2, 4
D. 2, 3, 4
E. 1, 2, 3, 4
Correct Answer: E
QUESTION 148
If the security policy editor or system status GUI is open, you can open the log viewer GUI from the window menu.
A. True
B. False
Correct Answer: A
QUESTION 149
NAT can NOT be configured on which of the objects?
A. Hosts
B. Gateways
C. Networks
D. Users
E. Routers
Correct Answer: D
QUESTION 150
Your customer has created a rule so that every user wants to go to Internet, that user must be authenticated. Which is the best method of authentication for users who must use specific computers for Internet access?
A. Session
B. User
C. Client
D. Connection
E. None of the above.
Correct Answer: C
QUESTION 151
Which of the following describes the behavior of VPN-1/Firewall-1 NG?
A. Traffic not expressly prohibited is permitted.
B. Traffic not expressly permitted is prohibited.
C. TELNET, SMTP and HTTP are allowed by default.
D. Secure connections are authorized by default, unsecured connections are not.
E. All traffic is controlled by explicit rules.
Correct Answer: B
QUESTION 152
New users are created from templates. What is the name of the standard template from which you would create a new user?
A. New
B. User
C. Group
D. Standard User.
E. Default
Correct Answer: E
QUESTION 153
In a distributed management environment, the firewall administrator has removed the default check from Accept VPN-1/Firewall-1 control connections under the Security Policy tab of the properties setup dialogue box. In order for the management module and the Firewall to communicate, you must create a rule to allow the Management Module to communicate to the firewall on which port?
A. 80
B. 256
C. 259
D. 900
E. 23
Correct Answer: B
QUESTION 154
What is the command for installing a Security Policy from a *.W file?
A. Fw gen and then the name of the .W file.
B. Fw load and then the name of .W file.
C. Fw regen and then the name of the .W file.
D. Fw reload and then the directory location of the .W file.
E. Fw import and then the name of the .W file.
Correct Answer: B
QUESTION 155
In the Check Point Configuration Too, you create a GUI administrator with Read Only privileges. This allows the Firewall-1 administrator for the authorized GUI client (GUI workstation) privileges to change network object, and create and install rules.
A. True
B. False
Correct Answer: B QUESTION 156
Hybrid Authentication allows VPN-1/Firewall-1 NG to authenticate SecuRemote/SecureClient, using which of the following?
A. RADIUS
B. 3DES
C. TACACS
D. Any authentication method supported by VPN-1/Firewall-1.
E. Both A and C.
Correct Answer: D QUESTION 157
In order to install a new Security Policy on a remote firewall, what command must be issued on the remote firewall?
A. Fw unload all all.
B. Fw load new.
C. Cp clear policy.
D. None of the above, the command cp policy remove is issued from the manager.
E. None of the above, the new policy will automatically overwrite the existing policy.
Correct Answer: E QUESTION 158
As a firewall administrator if you want to log packets dropped by “implicit drop anything not covered” rules, you must explicitly define a Clean-up rule. This must be the last rule in the rule base.
A. True
B. False
Correct Answer: A QUESTION 159
Fully Automatic Client authentication provides authentication for all protocols, whether supported by these protocols or not.
A. True
B. False
Correct Answer: A QUESTION 160
VPN-1/Firewall-1 NG differs from Packet filtering and Application Layer Gateways, because?
A. VPN-1/Firewall-1 NG provides only minimal logging and altering mechanism.
B. VPN-1/Firewal-1 NG uses Stateful inspection which allows packet to be examined at the top of the layers of the OSI model.
C. VPN-1/Firewall-1 NG has access to a limited part of the packet header only.
D. VPN-1/Firewall-1NG requires a connection from a client to a firewall and firewall to a server.
E. VPN-1/Firewall-1 NG has access to packets passing through key locations in a network.
Correct Answer: B
QUESTION 161
AlphaBravo Corp has 72 privately addressed internal addresses. Each network is a piece of the 10-net subnetted to a class C address. AlphaBravo uses Dynamic NAT and hides all of the internal networks behind the external IP addresses of the Firewall. The Firewall administrator for AlphaBravo has noticed that policy installation takes significantly longer since adding all 72 internal networks to the address translation rule. What should the Firewall administrator do to reduce the time it takes to install a policy?
A. Create an object for the entire 10-net and use the object for the translation rule instead of the individual network objects.
B. Use automatic NAT rule creation on each network object. Hide the network behind the firewall’s external IP addresses.
C. Match packets to the state table, so packets are not dropped. Increase the size of the NAT tables.
D. Reinstall the Firewall and Security Policy Editor. The policy is corrupting Firewall’s binaries.
E. Increase the size of state table. Use automatic NAT rule creation to hide the networks behind an IP address other than firewall’s external IP.
Correct Answer: A
QUESTION 162
How does VPN-1/Firewall-1 NG implement Transparent authentication?
A. Unknown user receive error messages indicating that the firewalled gateway does not know the user names on the gateway.
B. VPN-1/Firewall-1 NG prompts for user names even through the authentication data may not be recognized by the firewall’s user database.
C. VPN-1/Firewall-1 NG allows connections, but hides the firewall from authenticated users.
D. Unknown users error messages indicating that the host does not know the users names on the server.
E. VPN-1/Firewall-1 NG does not allow connections from users who do not know the name of the firewall.
Correct Answer: C
QUESTION 163
When creating user authentication rule, select intersect with user database for source and destination to allow access according to the source specified in the rules.
A. True
B. False
Correct Answer: B
QUESTION 164
A connection initiated by the client in the figure below will be hidden behind the IP address of the interface
through which the connection was routed on the server side if the gateway (behind either interface 2 or
interface 3). Specifying 0.0.0.0 as the address is convenient because of network address translation (NAT)
is performed dynamically. And if the IP addresses of the gateway are changed, it is not necessary to
reconfigure the NAT parameters.
Which of the following is true about the following figure?
A. A connection initiated by the client will be hidden behind the IP address of the exit interface.
B. A connection initiated by the server will be hidden behind the IP address of the exit interface.
C. A connection initiated by the server will be hidden by the IP address of the client.
D. Source addresses of outbound packets from the client will be translated to 0.0.0.0.
E. Source addresses of outbound packets from the server will be translated to 0.0.0.0.
Correct Answer: A QUESTION 165
Which if the following statements about Client Authentication are FALSE?
A. In contrast to User Authentication, which allows access per user, Client Authentication allows access per ID address.
B. Authentication is by user name and password, but is the host machine (client) that is granted access.
C. Client Authentication is more secure than User Authentication, because it allows multiple users and connections from an authorized IP address or host.
D. Client Authentication enables administration to grant access privileges to a specific IP address after successful authentication.
Correct Answer: C QUESTION 166
When you make a rule, the rule is not enforces as part of your Security Policy.
A. True
B. False
Correct Answer: B QUESTION 167
Which of the following user actions would you insert as an INTERNAL Authentication scheme?
A. The user enters the security dynamics passcode.
B. The user prompted for a response from the RADIUS server.
C. The user prompted for a response from the AXENT server.
D. The user prompted for a response from the TACACS server.
E. The user enters an operating system account password.
Correct Answer: E QUESTION 168
When configuring Static NAT, you cannot map the routable IP address to the external IP address of the Firewall if attempted, the security policy installation fails with the following error “rule X conflicts with rule Y”.
A. True
B. False
Correct Answer: A QUESTION 169
The advantage of client authentication is that it can be used for any number of connections and for any services, but authentication is only valid for a specified length of time.
A. True
B. False Correct Answer: B QUESTION 170
You have set up Static NAT on a VPN-1/Firewall-1 to allow Internet traffic to an internal web server. You notice that any HTTP attempts to that machine being dropped in the log due to rule 0. Which of the following is the most likely cause?
A. Spoofing on the internal interface us set to Network defined by Interface IP and Net Mask.
B. Spoofing on the external interface is set to Not Defined.
C. You do NOT have a rule that allows HTTP access to the internal Web Server.
D. You do NOT have a rule that allows HTTP from the Web Server to Any destination.
E. None of the above.
Correct Answer: C QUESTION 171
As a firewall administrator, you are required to create VPN-1/Firewall-1 users for authentication. When you create a user for user authentication, the data is stored in the?
A. Inspect Engine.
B. Rule base.
C. Users database
D. Rulebase fws file
E. Inspect module.
Correct Answer: C QUESTION 172
If users authenticated successfully, they have matched the User and Authentication rule restriction of the user group to which they belong.
A. True
B. False
Correct Answer: A QUESTION 173
The only way to unblock BLOCKED connections by deleting all the blocking rules from the Rule base.
A. True
B. False
Correct Answer: B QUESTION 174
When you perform a cp fetch, what can you expect from this command?
A. Firewall retrieves the user database from the tables on the Management Module.
B. Firewall retrieves the inspection code from the remote Management Module and installs it to the kernel.
C. Management module retrieves the IP address of the target specified in the command.
D. Management module retrieves the interface information for the target specified in the command.
E. None of the above.
Correct Answer: B QUESTION 175
Each incoming UDP packet is locked up in the list of pending connections. Packets are delivered if they are _________.
A. A request.
B. A response to a request.
C. Source routed.
D. Allowed by the Rule Base.
E. Both B and D.
Correct Answer: E
QUESTION 176
Assume an NT system. What is the default expiration for a Dynamic NAT connection NOT showing any TCP activity?
A. 30 Seconds.
B. 60 Seconds.
C. 330 Seconds.
D. 660 Seconds.
E. 3600 Seconds.
Correct Answer: E
Buying all CheckPoint 156-210 exam sample questions can guarantee you to pass your first CheckPoint 156-210 exam. If you do not pass the exam,FLYDUMPS will full refund to you. You can also free online download the part of FLYDUMPS’s CheckPoint 156-210 exam practice questions and answers as a try. After your understanding of our reliability, I believe you will quickly add FLYDUMPS’s CheckPoint 156-210 exam sample questions to your cart. FLYDUMPS will achieve your dream. FLYDUMPS is a website to achieve dreams of many IT people. FLYDUMPS provide candidates participating in the IT certification exams the information they want to help them pass the CheckPoint 156-210 exam.
Welcome to download the newest Examwind JN0-360 dumps: http://www.examwind.com/jn0-360.html
http://www.maeeonline.org/sap-c-hanatec-1-preparation-materials-provides-best-sap-c-hanatec-1-test-engine-with-100-pass-rate/