Category: Adobe
Flydumps Adobe 9A0-040 exam questions and answers in PDF are prepared by our expert, Moreover, they are based on the recommended syllabus covering all the Adobe 9A0-040 exam objectives.You will find them to be very helpful and precise in the subject matter since all the Adobe 9A0-040 exam content is regularly updated and has been checked for accuracy by our team of SAP expert professionals.
QUESTION 21
Which automation mode in the Audio Mixer window should you use if you want automation to start only when you begin to adjust a value, and the value to remain where it is when you stop adjusting it.
A. Latch
B. Touch
C. Read
D. Write
Correct Answer: A QUESTION 22
Which is a valid purpose for exporting video with sequence markers?
A. To mark important points in individual clips in the sequence.
B. To add subtitles to a sequence.
C. To create Web links or chapter links in an exported sequence.
D. To view a comment in the Program monitor when the CTI is cued to the marker.
Correct Answer: C QUESTION 23
You are working with a sequence that will be exported to a movie for streaming Web playback. Which three encoding formats should you choose? (Choose three)
A. RealMedia
B. MPEG2
C. Microsoft DV
D. QuickTime
E. MPEG1
F. Windows Media
Correct Answer: ADF QUESTION 24
Which is a valid use for a reference monitor?
A. Viewing multiple source clips at once.
B. Viewing the sequence in a secondary monitor, usually for the purpose of color correction or color matching.
C. Ganging the Source and Program views together.
D. Arranging the windows to simulate older versions of Premiere.
Correct Answer: B QUESTION 25
You are working on your sequence and realize that you chose the wrong preset when you started the project. The audio sample rate of your project is 32kHz, but the sample rate of your source media audio is 48kHz. You do NOT want to downsample your audio. What should you do?
A. Nest the sequence in a new sequence that uses the proper sample rate.
B. Continue working, but make sure to export the project at 48kHz.
C. Start a new project with the 48kHz setting and import the sequence you were working on into that project.
D. change the audio sample rate to 48kHz in the General panel of the Project Settings dialog box,
Correct Answer: C QUESTION 26
A still image has a duration of 2 seconds in a project that is set to 30 frames per second. Which procedure will create a 2-second clip instead of 60 frames at 1/30 of a second each?
A. Select Millions of Colors from the Color Depth menu in the Video Rendering submenu of the Project Settings dialog box.
B. Select Scale Clips to Project Dimensions when Adding to Sequence from the General menu of the Project Settings dialog box.
C. Select Optimize Stills in the Video Rendering submenu of the Project Settings dialog box.
D. Select an appropriate codec from the Compressor menu in the Video Rendering submenu of the Project Settings dialog box.
Correct Answer: C
QUESTION 27
Your sequence has several clips on the Timeline. The edit points for the clips are timed to the beat of a music soundtrack. The edit point between the third and fourth clips are NOT in sync with the music. You want to drag the edit point between clips three and four to the correct location WITHOUT affecting any of the other edit points. Which tool should you use?
A. Pen
B. Rolling Edit
C. Ripple Edit
D. Slip
Correct Answer: B
QUESTION 28
Which action can be performed while using the Capture window and playing back a tape for viewing or capture?
A. Changing the folder where clips are logged.
B. Changing the scratch disk.
C. Entering information about the next clip.
D. Logging clips to a batch list.
Correct Answer: C
QUESTION 29
You are working in the Adobe Title Designer. You want your title to begin off screen, roll from the bottom to the top, and finish off screen. What should you do?
A. Create your text. Right-click the text box and choose Roll From Bottom to Top, and check Start Off Screen and End Off Screen.
B. Create your text. Choose Title > Roll/Crawl Options and check Roll From Bottom to Top.
C. Select Roll from the Title Type pop up menu. Create your text. Choose Title > Roll/Crawl Options and check Start Off Screen and End Off Screen.
D. Create your text. Right-click the text box and choose Transform > Roll/Crawl Options and check Start Off Screen and End Off Screen.
Correct Answer: C
QUESTION 30
You want to add a new video clip to your timeline between two existing video clips. You do NOT want to lose any existing footage. Which editing technique should you use?
A. rolling edit
B. insert edit
C. overlay edit
D. razor edit
Correct Answer: B
QUESTION 31
Which task can be accomplished from the Audio Mixer window?
A. adding a split edit between two audio clips
B. adding an audio effect
C. adding a clip from a bin
D. adding a cross-fade to two audio clips
Correct Answer: B
QUESTION 32
You want to add an additional keyframe directly to a clip on the timeline. You select the clip and set it to Show Keyframes for the filter you want to add a keyframe to. Which tool should you use to add a new keyframe to the clip?
A. Ctrl+left click the clip with the Pen tool
B. Ctrl+left click the clip with the Selection tool
C. left click the clip with the Selection tool
D. left click the clip with the Pen tool
Correct Answer: A
QUESTION 33
Which options in the Export Movies dialog box will allow you to open and edit the original project from within another Adobe Premiere Pro project or from another application that supports the command.?
A. File Type set to Animated GIF and Embedding Options set to None
B. File Type set to Targa and Embedding Options set to Project
C. File Type set to QuickTime and Embedding Options set to None
D. File Type set to Microsoft AVI and Embedding Options set to Project
Correct Answer: D
QUESTION 34
Which portion of the timeline is represented in the Effect Controls window?
A. The duration of the timeline
B. The duration of the selected clip on the timeline
C. The duration of the active sequence on the timeline
D. The duration of the work area set on the timeline
Correct Answer: B
QUESTION 35
You want to import an Adobe Photoshop image that contains blending modes while preserving the appearance of the image. What should you do?
A. Import the Photoshop image as a single file, and choose the top layer in the Layer Options of the Import Layered File dialog box.
B. Import the Photoshop image as a single file, and select Merged Layers in the Layer Options section of the Import Layered File dialog box.
C. Import the Photoshop image as a sequence.
D. Import the Photoshop image as a series of stills.
Correct Answer: B
QUESTION 36
You want to insert a clip into a sequence without altering the soundtrack. Which method results in an insert edit that shifts subsequent clips only in the tracks to which you add the clip?
A. Alt-drag to a track in the Timeline.
B. Ctrl-drag to a track in the Timeline.
C. Ctrl+Alt-drag to a track in the Timeline.
D. Ctrl+Shift-drag to a track in the Timeline.
Correct Answer: C QUESTION 37
Which equipment does Adobe Premiere Pro support natively and is necessary for device control of an external digital video device?
A. a source videotape without timecode
B. a IEEE 1394 cable that connects the device to the computer
C. a serial port connection on your computer
D. a software driver for Windows Media Player or Apple Quicktime
Correct Answer: B QUESTION 38
You want to import CD audio into your project. What should you do?
A. Import the CDA file into your project and choose Clip > Audio > Conform to Project Settings.
B. Choose File > Capture > CD Audio, and select Current Project Settings in the Conform Audio dialog box.
C. Use a third party application to first convert the CD Audio to a supported format, and then import the audio clip
D. Choose File > Capture and select CD Audio Device from the Device Control pop up menu.
Correct Answer: C QUESTION 39
You are editing the middle of three adjacent clips. You want to shift the In and Out points of the clip forward or backward by the same number of frames by using a single action.
You do NOT want to change the duration of the clip or affect the adjacent clips. Which tool should you use?
A. Slip Edit
B. Rolling Edit
C. Slide Edit
D. Ripple Edit
Correct Answer: A QUESTION 40
Which statement about locking a video track in the timeline is true?
A. The locked track becomes the target track.
B. The associated audio track is also locked.
C. The locked track is not exported.
D. The locked track is not shifted when performing insert edits.
Correct Answer: D QUESTION 41
Which set of options in the Transcode Settings dialog box of the Adobe Media Encoder will allow you to store information about the media?
A. Audience
B. Metadata
C. Multiplexer
D. Bitrate Encoding
Correct Answer: B
QUESTION 42
You want a title to fade in over a clip. What should you do?
A. select the title in the timeline, then set opacity keyframes in the Effects Control window
B. select the clip in the timeline, then set opacity keyframes in the Effects Control window
C. select the clip in the timeline, then set opacity keyframes in the Effects window
D. select the title in the timeline, then set opacity keyframes in the Effects window
Correct Answer: A
QUESTION 43
You want to resize the Work Area Bar over a contiguous range of clips. What should you do?
A. Alt-double click the Work Area Bar.
B. Double-click the Work Area Bar.
C. Context-click the Work Area Bar and select the appropriate option in the context menu.
D. Ctrl-click the Work Area Bar.
Correct Answer: A
QUESTION 44
Which automation mode in the Audio Mixer window should you use if you want automation to start only when you begin to adjust a value, and the value to remain where it is when you stop adjusting it.
A. Touch
B. Read
C. Latch
D. Write
Correct Answer: C
QUESTION 45
Which roll/crawl option specifies the number of frames that will play before the title begins?
A. Pre-Roll
B. Post-Roll
C. Ease-Out
D. Ease-In
Correct Answer: A
QUESTION 46
Which three attributes can be adjusted when you use the Fixed Effects area of the Effects Control palette? (Choose three)
A. Scale
B. Anchor Point
C. Tilt
D. Transform
E. Swivel
F. Rotation
Correct Answer: ABF QUESTION 47
When is digital audio conformed to the project settings?
A. when the audio is edited in Premiere Pro
B. when the project is exported to its final format
C. when the project is completely previewed in Premiere Pro
D. when the audio is imported
Correct Answer: D QUESTION 48
You want to know where in your video frame you can display a title that will NOT be cut off when viewed on a video monitor. Which setting in the Monitor window should you use?
A. Set In and Out Points
B. Output
C. Set Unnumbered Marker
D. Safe Margins
Correct Answer: D QUESTION 49
You are looking at a timeline and CANNOT see the first frame of each video clip. You want to view the thumbnails of the video clips. What should you do?
A. expand the video track by clicking the triangle to the left of a track’s name
B. right-click the clips in the video track and select Frame Hold from the pop-up menu
C. right-click the clips in the video track and select Enable from the pop-up menu
D. click the Eye icon to the left of the video track
Correct Answer: A QUESTION 50
Which set of options in the Transcode Settings dialog box of the Adobe Media Encoder will allow you to store information about the media?
A. Multiplexer
B. Bitrate Encoding
C. Audience
D. Metadata
Correct Answer: D QUESTION 51
What happens if you position the cursor over the edit point of the transition graphic as shown in the exibit, and then drag the cursor left or right?
A. Change the transition duration
B. A ripple edit
C. Change the transition position
D. A rolling edit
Correct Answer: D QUESTION 52
You want to export only the audio from a sequence in the Timeline window that contains both video and audio. What should you do?
A. right-click each video clip in the timeline, deselect Reveal in Project, and then export
B. turn off the Show Frames selection in the Set Display Style area of the timeline, and then export
C. click the eye icon to the left of any video clip in the timeline to remove it, and then export
D. set the properties in each video clip in the timeline to the appropriate setting, and then export
Correct Answer: C QUESTION 53
Where does a saved static title created in the Adobe Title Designer automatically appear?
A. at the current time in the Timeline
B. at the end of the currently selected clip in the Timeline
C. in the active bin in the Project window
D. in a separate file that needs to be imported to the current project
Correct Answer: C QUESTION 54
Your timeline is set to display keyframes. You want to set a new keyframe for a property in the timeline. What should you do?
A. Position the Selection tool over the keyframe graph line where you want to add the keyframe, and then Control-click.
B. Position the Pen tool over the keyframe graph line where you want to add the keyframe, and then Control-click.
C. Position the Selection tool over the keyframe graph line where you want to add the keyframe, and then click.
D. Position the Pen tool over the keyframe graph line where you want to add the keyframe, and then click.
Correct Answer: B QUESTION 55
What is the purpose of the Unlink Media command in the Project menu?
A. To take a single footage clip with audio and video and create two separate clips, one for audio and one for video.
B. To recapture the selected footage clip at the resolution of the project.
C. To convert the selected online file to an offline file.
D. To remove any unused files in the Project Window.
Correct Answer: C QUESTION 56
Which setting in the Audio Mixer window should you choose if you want to alter automation settings for some properties while leaving other properties unchanged?
A. Pre-Fader
B. Switch to Touch After Write
C. Safe During Write
D. Show/Hide Tracks
Correct Answer: C QUESTION 57
Which options in the Export Movies dialog box will allow you to open and edit the original project from within another Adobe Premiere Pro project or from another application that supports the command.?
A. File Type set to QuickTime and Embedding Options set to None
B. File Type set to Animated GIF and Embedding Options set to None
C. File Type set to Targa and Embedding Options set to Project
D. File Type set to Microsoft AVI and Embedding Options set to Project
Correct Answer: D QUESTION 58
You are editing the middle of three adjacent clips. You want to shift the In and Out points of the clip forward or backward by the same number of frames by using a single action.
You do NOT want to change the duration of the clip or affect the adjacent clips. Which tool should you use?
A. Rolling Edit
B. Ripple Edit
C. Slide Edit
D. Slip Edit
Correct Answer: D QUESTION 59
You have copied a set of keyframes in the Effects Controls window. Where will the copied keyframes
initially appear when you paste them in a second clip?
A. In the corresponding property in the destination clip’s effect. The earliest keyframe appears at the current time, and the other keyframes follow in relative order.
B. In the corresponding property in the destination clip’s effect. The earliest keyframe appears at the beginning of the clip, and the other keyframes follow in relative order.
C. In the selected properties in the destination clip’s effect. The earliest keyframe appears at the current time, and the other keyframes follow in relative order
D. In the selected properties in the destination clip’s effect. The earliest keyframe appears at the beginning of the clip, and the other keyframes follow in relative order.
Correct Answer: A
QUESTION 60
When is the Apply Video Transition option in the Squence menu be available?
A. Anytime a clip is selected
B. Anytime the the current-time indicator is on the edit point between two clips on your target track
C. Anytime the Video Transitions Bin is selected
D. Anytime there is a clip on the timeline
Correct Answer: B
QUESTION 61
Which edit is created by default when you drag a clip from a bin into the Timeline?
A. overlay edit
B. insert edit
C. razor edit
D. rolling edit
Correct Answer: A
QUESTION 62
You want to add an additional keyframe directly to a clip on the timeline. You select the clip and set it to Show Keyframes for the filter you want to add a keyframe to. Which tool should you use to add a new keyframe to the clip?
A. left click the clip with the Selection tool
B. left click the clip with the Pen tool
C. Ctrl+left click the clip with the Selection tool
D. Ctrl+left click the clip with the Pen tool
Correct Answer: D
QUESTION 63
Which statement about a static title created in the Adobe Title Designer is true?
A. If you are creating a static title in content for the Web or for a CD, the safe title and safe action zones do not apply since you can see the entire video.
B. The title is saved with a .ppj file extension.
C. You must apply transparency to a title before bringing it into the timeline.
D. Logos added to a static title cannot be resized.
Correct Answer: A
QUESTION 64
Your sequence has three clips. You want to move edit point 2 WITHOUT affecting any other edit points.
Which tool should you use?
A. Slide
B. Rolling Edit
C. Razor Edit
D. Slip
Correct Answer: B
QUESTION 65
Which button in the Project window allows you to override the default thumbnail that is displayed?
A. Icon
B. Automate to Sequence
C. Play
D. Poster Frame
Correct Answer: D
Whenever Cisco candidates take a tour of sample questions of Adobe 9A0-040 exam they find their training to be matchless to great extent.Passing the Adobe 9A0-040 on your own can be a difficult task,but with Adobe 9A0-040 preparation products, many candidates who appeared online passed Adobe 9A0-040 easily.
You can prepare for Adobe 9A0-039 with little effort because Flydumps is now at your service to act as a guide in FLYDUMPS you pass Adobe 9A0-039 exam. Now get that necessary competitive edge that comes with preparing with the help of Flydumps.
QUESTION 51
You have created the following expression on Layer A: thisComp.layer(“layer D”).scale.valueAtTime(time-2) Which is the global object of this expression?
A. scale
B. thisComp
C. layer(“layer D”)
D. valueAtTime(time-2)
Correct Answer: D QUESTION 52
Which option or feature should you use to increase or decrease the transparency of an entire matte?
A. Alpha Levels
B. Matte Choker
C. Color Range Key
D. Color Difference Key
Correct Answer: A QUESTION 53
You have created an animated layer that will be used to create highlights on the layers below. You want the highlights to display when they are only over opaque pixels of the underlying layers. Which After Effects setting or feature should you use?
A. Alpha Matte
B. Luma Matte
C. Inverted Alpha Matte
D. Preserve Underlying Transparency
Correct Answer: D QUESTION 54
You have created a layer and applied a Track Matte. What happens when you choose Edit > Split Layer?
A. After Effects retains the order of Track Mattes above the layer.
B. After Effects warns you to remove the Track Matte and reapply it after the layer is split.
C. After Effects splits the layer and applies the Preserve Underlying Transparency option to the new layers.
D. After Effects creates a precomposition of the two new layers and applies the Track Matte in the current composition.
Correct Answer: A QUESTION 55
Which keying effect in After Effects creates a binary key?
A. Color key
B. Inner Outer key
C. Linear Color key
D. Color Difference key
Correct Answer: A QUESTION 56
Click the Exhibit button.
Which icon should you select to allow your working view to match the pixel aspect ratio of your final output?
A. A
B. B
C. C
D. D
E. E
F. F
Correct Answer: F
QUESTION 57
Which setting for Resolution in the Composition Settings dialog box renders one-quarter of the pixels contained in the full resolution footage?
A. Half
B. Full
C. Custom
D. Quarter
Correct Answer: A
QUESTION 58
What happens when you place 24 fps footage into a composition with a frame rate of 15 fps?
A. The 24 fps footage speeds up.
B. The 24 fps footage slows down.
C. The 24 fps footage skips frames.
D. The 24 fps footage repeats frames.
Correct Answer: C
QUESTION 59
Which After Effects command lets you isolate a video layer for editing by hiding other video layers in the Composition window?
A. Layer > Switches > Shy
B. Layer > Switches > Solo
C. Layer > Bring Layer to Front
D. Layer > Switches > Collapse
Correct Answer: B QUESTION 60
You want to expand the area previewed to the size of the composition. What should you do?
A. choose View > Resolution > Full
B. Shift-click on the RAM Preview button
C. double-click the center of the Work Area Bar
D. double-click on the Rulers in the Composition window
Correct Answer: C QUESTION 61
Which factor helps determine memory requirements for Adobe After Effects when rendering a composition?
A. the clock speed of the CPU
B. the resolution of the monitor
C. the resolution of the composition frame
D. the throughput rate of the computer’s bus
Correct Answer: C QUESTION 62
You applied a drop shadow to a layer, but when it is in motion, the shadow follows the layer and NOT the light source. What could be wrong?
A. The drop shadow is locked to the wrong layer.
B. The light source needs to be animated over time.
C. The motion was rendered before the drop shadow in the rendering pipeline.
D. The drop shadow was rendered before the motion in the rendering pipeline.
Correct Answer: D QUESTION 63
You want to enable a playback device to choose an appropriate stream optimized to the users bandwidth. Which option should you select when exporting to Windows Media or Real Media?
A. Video
B. Metadata
C. Audiences
D. Video Content
Correct Answer: C QUESTION 64
Which field order is required when exporting field-rendered NTSC DV video?
A. lower field
B. upper field
C. upper or lower field
D. none, DV video uses progressive scan
Correct Answer: A QUESTION 65
A user has set the audio preview settings to 44.100 KHz, but after final rendering, the audio quality sounds worse than it did in the preview. What could be the problem?
A. The audio preview is set to 8-bit.
B. The audio preview is set to mono.
C. The output module is set for a lower sample rate.
D. The output module is set for a higher sample rate.
Correct Answer: C QUESTION 66
Which statement about using the RotoBezier option when working with paths is true?
A. Only open paths can be converted to RotoBezier paths.
B. Only closed paths can be converted to RotoBezier paths.
C. RotoBezier paths can be edited by adjusting their direction points.
D. You can change RotoBezier smooth corners to sharp corners with the Convert Vertex tool.
Correct Answer: D QUESTION 67
You have created a layer and applied a Track Matte. What happens when you choose Edit > Split Layer?
A. After Effects retains the order of Track Mattes above the layer.
B. After Effects warns you to remove the Track Matte and reapply it after the layer is split.
C. After Effects splits the layer and applies the Preserve Underlying Transparency option to the new layers.
D. After Effects creates a precomposition of the two new layers and applies the Track Matte in the current composition.
Correct Answer: A QUESTION 68
Which keying effect divides an image into two mattes and then combines them into an alpha matte?
A. Extract Key
B. Linear Color Key
C. Color Difference Key
D. Difference Matte Key
Correct Answer: C QUESTION 69
Which option controls how closely the created path matches the shape of the alpha channel when you choose Layer > Auto Trace?
A. Blur
B. Threshold
C. Tolerance
D. Current Frame
Correct Answer: C QUESTION 70
Which light has a source constrained by a cone?
A. spot
B. point
C. parallel
D. ambient
Correct Answer: A
QUESTION 71
Which three properties are added to a 2D layer when it is converted to a 3D layer? (Choose three.)
A. ability to accept lights
B. ability to cast shadows
C. ability to do 3D modeling
D. Z axis transform properties
E. ability to animate 3D objects in ElectricImage files
F. ability to modify 3D information from composited files
Correct Answer: ABD
QUESTION 72
You are working with a 3D layer and choose Effect > Distort >Transform.
What happens first during rendering?
A. x, y, and z properties are applied in the Timeline window.
B. Orientation properties are applied in the Timeline window.
C. Orientation and x, y, and z properties are applied in the Timeline window.
D. Transformation properties are applied with the Effect > Distort >Transform command.
Correct Answer: D
QUESTION 73
Which statement about using After Effects OpenGL previewing is true?
A. Layers are limited to 2,000 by 2,000 pixels.
B. OpenGL supports all After Effects blending modes.
C. OpenGL previews are created by using Adaptive Resolution previewing.
D. OpenGL previews are limited only by the amount of installed RAM on the system.
Correct Answer: A
QUESTION 74
You want to slice an image that contains 3D channel information along its z depth values. Which 3D Channel effect should you use?
A. ID Matte
B. Depth Matte
C. Depth of Field
D. 3D Channel Extract
Correct Answer: B
QUESTION 75
You want to crossfade between several cameras in a 3D scene while rendering final output. Which feature or command should you use?
A. precomposing
B. Effect > 3D Channel > Depth of Field
C. Timeline camera property Point of Interest
D. Timeline camera property Focus Distance
Correct Answer: A
QUESTION 76
Which example represents an array for scale in an expression?
A. .scale
B. [xy,xy]
C. Scale = 3
D. xyscale = Math.sqrt
Correct Answer: B
QUESTION 77
You have created an expression for the scale property of Layer B. You drag the pick whip to the x value for the position property of Layer A. Which expression is written for the scale property of Layer B?
A. thisComp.layer(“Layer A”).position[x]
B. thisComp.layer(“Layer A”).position[0]
C. thisComp.layer(“Layer A”).position[0], thisComp.layer(“Layer A”).position[0]
D. thisComp.layer(“Layer A”).position[0], thisComp.layer(“Layer A”).position[1]
Correct Answer: C
QUESTION 78
You have created the following expression on Layer A: thisComp.layer(“layer D”).scale.valueAtTime(time-2) Which is the global object of this expression?
A. scale
B. thisComp
C. layer(“layer D”)
D. valueAtTime(time-2)
Correct Answer: D
QUESTION 79
Which After Effects feature enables you to create a relationship from the keyframes of one layer property and dynamically control different layer properties?
A. null objects
B. child layers
C. expressions
D. parent layers
Correct Answer: C
QUESTION 80
For which option in the Project Settings dialog box can you enter a value for where to start numbering frames?
A. Frames
B. Color Depth
C. Drop-Frame
D. Non-Drop-Frame
Correct Answer: A QUESTION 81
Which is the default setting for levels in the Audio palette?
A. -96 dB
B. 0 dB
C. 100 dB
D. 120 dB
Correct Answer: B QUESTION 82
Which action restores the original settings of all palettes and command settings?
A. rebooting your computer
B. restarting Adobe After Effects
C. opening a new Adobe After Effects project
D. deleting the Adobe After Effects preferences file
Correct Answer: D QUESTION 83
Which option in the Smart Masks palette should you use to match the seventh vertex in the first keyframe to the seventh vertex in the second keyframe?
A. Quality
B. Keyframe Fields
C. Bending Resistance
D. Use Linear Vertex Paths
Correct Answer: A QUESTION 84
Which tool should you use to change the point around which a layer will rotate without changing the position of the layer in the Composition window?
A. Rotation tool
B. Selection tool
C. Pan Behind tool
D. Orbit Camera tool
Correct Answer: C QUESTION 85
Which is an example of a non-drop-frame timecode?
A. 00072
B. 0007+2
C. 4:15:14:07
D. 4;15;14;04
Correct Answer: C QUESTION 86
Which action will preview audio in the Work Area?
A. pressing the spacebar on the keyboard
B. pressing Shift + 0 on the numeric keypad
C. pressing the Enter key on the numeric keypad
D. pressing Alt + the period key (Windows) or Option + the period key (Mac OS) on the numeric keypad
Correct Answer: D QUESTION 87
You are using the Motion Tracking feature of After Effects and are setting the search region to track the movement of a specific feature in the footage.
Which should you use to determine the size of the search region?
A. speed of movement in the entire shot
B. changes of direction throughout the entire shot
C. total movement of the feature throughout the entire shot
D. frame to frame movement of the feature throughout the shot
Correct Answer: D QUESTION 88
You have added additional track points to motion footage by using the New Track Point option in the Tracker Controls palette options menu. Which feature or command can make use of the additional Track Point data?
A. expressions
B. Track Type > Stabilize
C. Track Type > Perspective corner pin
D. position keyframes set by the Track Motion button
Correct Answer: A QUESTION 89
Which effects can you apply to a tracked location using the Motion Tracker?
A. keying effects
B. effects with rotation properties
C. effects with position properties
D. effects with text or number properties
Correct Answer: C QUESTION 90
Which defines the area in the footage to be tracked when using the Motion Tracking feature?
A. track point
B. attach point
C. search region
D. feature region
Correct Answer: D QUESTION 91
Which Vector Paint playback mode displays strokes painted at the current frame and surrounding few frames?
A. All Strokes
B. Onion Skin
C. Past Strokes
D. Hold Strokes
Correct Answer: B
QUESTION 92
Which operation can be streamlined by using Favorite Effects?
A. applying a Motion Blur to each layer in a composition
B. applying time remapping to each layer in a composition
C. applying the same interpretation to each footage in the Project window
D. applying the same compression settings to each QuickTime movie in the render queue
Correct Answer: A
QUESTION 93
Effects applied to an adjustment layer modify _____.
A. all layers in the composition
B. only the adjustment layer itself
C. all layers below the adjustment layer
D. all layers above the adjustment layer
Correct Answer: C
QUESTION 94
Which After Effects feature or command moves pixels in one layer based on the brightness values of pixels in another layer?
A. Offset
B. Motion Tracking
C. Time Remapping
D. Displacement Map
Correct Answer: D
QUESTION 95
Which statement about how Adobe After Effects uses RGB images as layer maps in the Particle Playground is true?
A. Adobe After Effects combines the RGB channels into a grayscale composite channel capable of changing only one particle property.
B. Adobe After Effects allows you to map each channel of an RGB image to a separate particle property. The image can change three particle properties.
C. Adobe After Effects allows you to choose one channel of the RGB image to map to one particle property. The image can change only one particle property.
D. Adobe After Effects can only use grayscale images as Layer Maps in Particle Playground NOT RGB images. The image can change NO particle properties.
Correct Answer: B
QUESTION 96
You want to create a custom brush. What should you do?
A. create the brush in the Paint palette
B. create the brush in the Brush Tips palette
C. Alt + click (Windows) or Option + click (Mac OS) with the brush tool
D. Alt + click (Windows) or Option + click (Mac OS) with the Clone Stamp tool
Correct Answer: B
QUESTION 97
After enabling the keyframe stopwatch for rotation, you set several rotation keyframes with different values for a layer. When previewing the animation there is NO rotation occurring in the animation. What should you do?
A. build a RAM preview
B. enable Layer Keyframes from the Composition window menu
C. redo the keyframes moving the time marker for each change in rotation
D. redo the rotation using linear, bezier, auto bezier, or continuous bezier keyframes
Correct Answer: C
QUESTION 98
You want to apply a filter on a layer that has a mask. You do NOT want the filter to affect the mask. What should you do?
A. precompose the layer and apply the filter and mask to the precomposed layer
B. precompose the layer with the filter and apply the mask to the precomposed layer
C. precompose the layer with the mask and apply the filter to the precomposed layer
D. precompose the layer with the filter and mask applied to the layer choosing the Leave All Attributes In option in the Pre-Compose dialog box
Correct Answer: B
QUESTION 99
What happens to keyframes when a layer is time-stretched to 200%?
A. The keyframe values are doubled.
B. The keyframes are also time-stretched.
C. The keyframe values are reduced by half.
D. The keyframes maintain their original positions.
Correct Answer: B
QUESTION 100
Auto-orient rotation is used to _____.
A. constrain the rotation of a layer item to a specified angle
B. allow a layer item to rotate automatically along a motion path
C. make a layer item automatically rotate and point toward another moving item
D. automatically orient the rotation of a layer to a vertical position at all times while in motion
Correct Answer: B
QUESTION 101
You want to assign the transformation properties of one layer to the transformation properties of other layers. What should you do?
A. use parenting
B. use null objects
C. choose Layer > Auto Trace
D. choose Animation > Keyframe Assistant > Sequence Layers
Correct Answer: A QUESTION 102
You want to change the default formatting of text layers. What should you do?
A. choose Edit > Preferences
B. make changes in the Character palette with no text selected
C. highlight text in another layer while making changes in the Character palette
D. select multiple text layers of text while entering changes in the Character palette
Correct Answer: B QUESTION 103
Which statement about creating masks for text layers is true?
A. They must be created in a pre-composition.
B. You can create them in the Composition window.
C. Only RotoBezier masks can be used with text layers.
D. You must use the command Layer > Create Outlines before masking.
Correct Answer: B QUESTION 104
You want to animate the opacity of a text string gradually from the first character to the last character in the text string. Which Timeline window property should you keyframe?
A. End
B. Start
C. Offset
D. Opacity
Correct Answer: A QUESTION 105
You want to animate the space between lines in a text layer. For which text feature should you create keyframes?
A. Leading
B. Vertical Scale
C. Adobe Everyline Composer
D. Adobe Singleline Composer
Correct Answer: A QUESTION 106
Which text feature lets you control the spacing between a range of selected text characters?
A. Kerning
B. Leading
C. Tracking
D. Horizontal Scale Correct Answer: C
QUESTION 107
Which window should you use to analyze, trim, and insert footage into a composition?
A. Layer
B. Project
C. Footage
D. Timeline
Correct Answer: C
QUESTION 108
Which statement about frame rates in After Effects is true?
A. Frame rates are set at the project level.
B. Composition frame rates override project frame rates.
C. Compositions in a project can contain different frame rates.
D. Frame rates are set for the project in the render module of the Render Queue.
Correct Answer: C
QUESTION 109
Which option describes how NTSC video displays fields?
A. 29.97 fps
B. interlaced
C. 3:2 pulldown
D. progressive scan
Correct Answer: B
QUESTION 110
Which statement about using Adobe Illustrator or Adobe Photoshop paths as masks in an After Effects composition is true?
A. Paths can be open or closed.
B. Only a single path can be used.
C. Paths must have no fill applied in Illustrator or Photoshop.
D. The paths must be dragged and dropped from Illustrator or Photoshop.
Correct Answer: A
Flydumps is ready to provide Adobe 9A0-039 candidates with Adobe 9A0-039 training materials which can be very much helpful for getting Adobe 9A0-039 certification, which means that candidates.Adobe 9A0-039 can easily get access to the services of Adobe 9A0-039 for practice exam, which will assure them 100% 3Com 3M0-250 success rate.Though Adobe 9A0-039 tests are not easy at all,but they do not make Adobe 9A0-039 things complicated.
Flydumps bring you the best Adobe 9A0-040 exam preparation materials which will make you pass in the first attempt.And we also provide you all the Adobe 9A0-040 exam updates as Flydumps announces a change in its Adobe 9A0-040 exam syllabus,we inform you about it without delay.
QUESTION 21
Click the Exhibit button.
You are exporting the timeline using the Adobe Media Encoder as shown in the exhibit. What effect will happen if you decrease the quality from 5 to 3 have?
A. Increase the quality of the exported file
B. Reduce the interlacing of the exported file
C. Reduce the time it takes to encode the file
D. Increase the time it takes to encode the file
Correct Answer: C QUESTION 22
You want to export your sequence with an alpha channel for later import into an NTSC DV project. Which compression method should you choose in the Export Movie Settings dialog box?
A. Microsoft DV
B. QuickTime Cinepak
C. QuickTime Sorenson
D. Uncompressed Microsoft .AVI with millions of colors+
Correct Answer: D QUESTION 23
You want to export your sequence to an NTSC DV movie for use in future NTSC DV projects. Which video options should you choose in the Export Movie Settings dialog box?
A. 720 x 480 Frame Size; No Fields (Progressive Scan); 15 fps Non Drop-Frame Timecode; Square Pixels (1.0).
B. 320 x 240 Frame Size; No Fields (Progressive Scan); 15 fps Non Drop-Frame Timecode; Square Pixels (1.0).
C. 720 x 480 Frame Size; Lower Fields First; 29.97 fps Drop Frame Timecode; D1/DV NTSC (0.9) Pixel Aspect Ratio.
D. 720 x 486 Frame Size; Lower Fields First; 29.97 fps Drop Frame Timecode; D1/DV NTSC (0.9) Pixel Aspect Ratio.
Correct Answer: C
QUESTION 24
Click the Exhibit button.
You are exporting the timeline using the Adobe Media Encoder as shown in the exhibit. What effect will decreasing the bitrate from 8.00 to 5.00 have?
A. Reduce the file size of the exported file
B. Reduce the frame rate of the exported file
C. Reduce the frame size of the exported file
D. Reduce the number of fields in the exported file
Correct Answer: A QUESTION 25
Which media format is only available when exporting a timeline using the Adobe Media Encoder?
A. QuickTime
B. RealMedia
C. Microsoft AVI
D. Microsoft DV AVI
Correct Answer: B QUESTION 26
In which situation should you deinterlace video footage?
A. You are exporting for PAL TV
B. You are exporting for the Web
C. You are exporting for NTSC TV
D. You are exporting for broadcast
Correct Answer: B QUESTION 27
Which statement about locking a video track in the timeline is true?
A. The locked track is not exported.
B. The associated audio track is also locked.
C. The locked track becomes the target track.
D. The locked track is not shifted when performing insert edits.
Correct Answer: D QUESTION 28
Your sequence has several clips on the Timeline. The edit points for the clips are timed to the beat of a music soundtrack. The edit point between the third and fourth clips are NOT in sync with the music. You want to drag the edit point between clips three and four to the correct location WITHOUT affecting any of the other edit points. Which tool should you use?
A. Slip
B. Pen
C. Ripple Edit
D. Rolling Edit
Correct Answer: D QUESTION 29
You want to advance five frames by using the playback controls in the Monitor window. What should you do?
A. click the Step Forward button
B. Shift-click the Step Forward button
C. Alt-click the Step Forward button
D. Control-click the Step Forward button
Correct Answer: B QUESTION 30
Which is a valid purpose for exporting video with sequence markers?
A. To add subtitles to a sequence.
B. To mark important points in individual clips in the sequence.
C. To create Web links or chapter links in an exported sequence.
D. To view a comment in the Program monitor when the CTI is cued to the marker.
Correct Answer: C QUESTION 31
Which edit is created by default when you drag a clip from a bin into the Timeline?
A. razor edit
B. insert edit
C. rolling edit
D. overlay edit
Correct Answer: D QUESTION 32
You are editing the middle of three adjacent clips. You want to shift the In and Out points of the clip forward or backward by the same number of frames by using a single action.
You do NOT want to change the duration of the clip or affect the adjacent clips. Which tool should you use?
A. Slip Edit
B. Slide Edit
C. Ripple Edit
D. Rolling Edit
Correct Answer: A QUESTION 33
You want to change the appearance of thumbnails in a sequence window. What should you do?
A. choose Sequence > Preferences and select an option
B. Alt-click the header area of the track to toggle between track display options
C. choose Timeline window options from the Timeline window menu and select an option for track display
D. click the triangle next to the name of the track to expand the track, click the Set Display Style button for the track and select an option
Correct Answer: D QUESTION 34
You want to adjust the edit point between two clips in your timeline. You do NOT want to adjust the total length of the sequence. Which editing tool or button should you use?
A. Extract button
B. Ripple Edit tool
C. Rolling Edit tool
D. Insert Edit button
Correct Answer: C QUESTION 35
You want to know where in your video frame you can display a title that will NOT be cut off when viewed on a video monitor. Which setting in the Monitor window should you use?
A. Output
B. Safe Margins
C. Set In and Out Points
D. Set Unnumbered Marker
Correct Answer: B QUESTION 36
When would you choose an option from the Audio Display Format pop-up box in the General submenu of the Project Settings dialog box?
A. to change the time division for the current project
B. to change how all sequences display time in the timeline
C. to change the time division for the audio track(s) in all sequences
D. to change how the currently selected sequence displays time in the timeline
Correct Answer: B QUESTION 37
You are dragging the shuttle slider in the Monitor window to the left. What happens as you move the slider further to the left?
A. The clip plays forward going faster as you drag further to the left.
B. The clip plays forward going slower as you drag further to the left.
C. The clip plays backwards going faster as you drag further to the left.
D. The clip plays backwards going slower as you drag further to the left.
Correct Answer: C QUESTION 38
You want to insert a clip into a sequence without altering the soundtrack.
Which method results in an insert edit that shifts subsequent clips only in the tracks to which you add the clip?
A. Alt-drag to a track in the Timeline.
B. Ctrl-drag to a track in the Timeline.
C. Ctrl+Alt-drag to a track in the Timeline.
D. Ctrl+Shift-drag to a track in the Timeline.
Correct Answer: C QUESTION 39
Which menu allows you to set the default transition?
A. The Preferences menu
B. The Effects window menu
C. The Effects Control window menu
D. The right click menu on the transition
Correct Answer: B QUESTION 40
Which portion of the timeline is represented in the Effect Controls window?
A. The duration of the timeline
B. The duration of the selected clip on the timeline
C. The duration of the work area set on the timeline
D. The duration of the active sequence on the timeline
Correct Answer: B QUESTION 41
Which three attributes can be adjusted when you use the Fixed Effects area of the Effects Control palette? (Choose three)
A. Tilt
B. Scale
C. Swivel
D. Rotation
E. Transform
F. Anchor Point
Correct Answer: BDF QUESTION 42
You want to copy a single effect from clip A to clip B. You do NOT want to copy all effects from clip A. What should you do?
A. select Clip A and choose Edit > Copy; then,select Clip B and choose Edit > Paste
B. select Clip A and choose Edit > Copy; then,select Clip B and choose Edit > Paste Attributes
C. Right click on clip A and choose Copy; then, right click on clip B and choose Paste Attributes
D. select Clip A, select the effect in the Effect Controls window and choose Edit > Copy; then, select Clip B and choose Edit > Paste in the Effect Controls window
Correct Answer: D QUESTION 43
Which transition setting for a wipe transition can be controlled from the Effects Control window?
A. adding a transition between two clips
B. deleting a transition between two clips
C. changing the type of wipe transition, such as from a clock wipe to a radial wipe
D. changing the color of the border between the two clips that forms the edge of the wipe
Correct Answer: D QUESTION 44
Click the Exhibit button.
What happens if you position the cursor over the edit point of the transition graphic as shown in the exibit, and then drag the cursor left or right?
A. A ripple edit
B. A rolling edit
C. Change the transition position
D. Change the transition duration
Correct Answer: B
QUESTION 45
You have copied a set of keyframes in the Effects Controls window. Where will the copied keyframes initially appear when you paste them in a second clip?
A. In the selected properties in the destination clip’s effect. The earliest keyframe appears at the current time, and the other keyframes follow in relative order
B. In the corresponding property in the destination clip’s effect. The earliest keyframe appears at the current time, and the other keyframes follow in relative order.
C. In the selected properties in the destination clip’s effect. The earliest keyframe appears at the beginning of the clip, and the other keyframes follow in relative order.
D. In the corresponding property in the destination clip’s effect. The earliest keyframe appears at the beginning of the clip, and the other keyframes follow in relative order.
Correct Answer: B
QUESTION 46
You want a title to fade in over a clip. What should you do?
A. select the clip in the timeline, then set opacity keyframes in the Effects window
B. select the title in the timeline, then set opacity keyframes in the Effects window
C. select the clip in the timeline, then set opacity keyframes in the Effects Control window
D. select the title in the timeline, then set opacity keyframes in the Effects Control window
Correct Answer: D
QUESTION 47
When is the Apply Video Transition option in the Squence menu be available?
A. Anytime a clip is selected
B. Anytime there is a clip on the timeline
C. Anytime the Video Transitions Bin is selected
D. Anytime the the current-time indicator is on the edit point between two clips on your target track
Correct Answer: D QUESTION 48
You want to move clip A from left to right across the screen with one full revolution. Which should you use?
A. One position keyframe and one rotation keyframe.
B. Two motion keyframes and one rotation keyframe.
C. Two position keyframes and one rotation keyframe.
D. Two position keyframes and two rotation keyframes.
Correct Answer: D QUESTION 49
The source file of a clip does NOT contain an alpha channel. You want to manually apply transparency to individual clip instances. What should you do?
A. apply a keying effect to the areas you want to be transparent
B. convert the clip to a format that supports only the three RGB channels
C. add a bright solid color matte on a track where you want transparency
D. choose the File > Interpret Footage command to automatically add an alpha channel
Correct Answer: A QUESTION 50
You want to create transparency based on light or dark areas in your image. Which key should you use?
A. Luma Key
B. Multiply Key
C. Chroma Key
D. Difference Key
Correct Answer: A QUESTION 51
You want to add an additional keyframe directly to a clip on the timeline.
You select the clip and set it to Show Keyframes for the filter you want to add a keyframe to. Which tool should you use to add a new keyframe to the clip?
A. left click the clip with the Pen tool
B. left click the clip with the Selection tool
C. Ctrl+left click the clip with the Pen tool
D. Ctrl+left click the clip with the Selection tool
Correct Answer: C QUESTION 52
Click the Exhibit Button.
You want to use the alpha channel from Clip B on Video Track 2 to define the transparency of Clip A on
Video Track 1.
What should you do?
A. Add the Alpha Matte Key Video Effect to Clip B.
B. Right-click Clip A and select Define Alpha Channel; then, select Clip B.
C. Add the Image Matte Key Video Effect to Clip A and select Clip B as the Matte Image.
D. Add the Track Matte Key Video Effect to Clip A and choose Video Track 2 as your matte.
Correct Answer: D QUESTION 53
Your timeline is set to display keyframes. You want to set a new keyframe for a property in the timeline. What should you do?
A. Position the Pen tool over the keyframe graph line where you want to add the keyframe, and then click.
B. Position the Selection tool over the keyframe graph line where you want to add the keyframe, and then click.
C. Position the Pen tool over the keyframe graph line where you want to add the keyframe, and then Control-click.
D. Position the Selection tool over the keyframe graph line where you want to add the keyframe, and then Control-click.
Correct Answer: C QUESTION 54
An image has a particular color in it. You want all of the pixels with that color to be transparent. What is the term for this process?
A. Mask
B. Matte
C. Keying
D. Alpha Channel
Correct Answer: C QUESTION 55
Which term is an invisible channel that defines transparent areas for the clip that contains the channel?
A. alpha
B. matte
C. keying
D. luminance
Correct Answer: A QUESTION 56
Click the Exhibit button.
How many instances of the clip will be deleted if you delete the file that is selected?
A. 1
B. 2
C. 3
D. 4
Correct Answer: B
QUESTION 57
You are working with source footage that is NTSC DV captured via IEEE-1394. You plan to export your finished project for use on CD-ROM using the following settings: Windows .AVI file; 320 x 240 Frame Size; 15 Frames Per Second.
Which project settings should you choose?
A. DV Playback Editing Mode; 720 x 480 Frame Size; Lower Fields First; 29.97 fps Drop Frame Timecode; D1/DV NTSC (0.9) Pixel Aspect Ratio.
B. DV Playback Editing Mode; 720 x 486 Frame Size; Lower Fields First; 29.97 fps Drop Frame Timecode; D1/DV NTSC (0.9) Pixel Aspect Ratio.
C. DV Playback Editing Mode; 720 x 480 Frame Size; No Fields (Progressive Scan); 15 fps Non Drop-Frame Timecode; Square Pixels (1.0).
D. Video for Windows Editing Mode; 320 x 240 Frame Size; No Fields (Progressive Scan); 15 fps Non Drop-Frame Timecode; Square Pixels (1.0).
Correct Answer: A
QUESTION 58
Which statement about audio sample rate in the Capture submenu of the Project Settings dialog box is true?
A. Resampling the audio will not affect the quality of the audio.
B. Higher rates generally provide better audio quality than lower rates.
C. Setting a different rate from the original audio will take less time for processing.
D. Audio should be captured at a lower rate than the final rate in the finished project.
Correct Answer: B
QUESTION 59
Which button in the Project window allows you to override the default thumbnail that is displayed?
A. Play
B. Icon
C. Poster Frame
D. Automate to Sequence
Correct Answer: C QUESTION 60
For which task should you choose Project > Automate to Sequence?
A. export clips from a bin to a DV camera
B. quickly assemble a rough cut of clips into a sequence
C. place parts of clips in a sequence without setting in and out points
D. automatically place different transitions between clips in a sequence
Correct Answer: B
Adobe 9A0-040 Questions and Answers Products basically comprise of the simulated Adobe 9A0-040 exam questions AND their most correct answers,accompanied with a methodical elucidation of the Adobe 9A0-040 answers and the probable wrong answers.The extent to which Adobe 9A0-040 Questions and Answers Products cover their Cisco subject is so thorough,that once you are done with a Cisco product,passing the Adobe 9A0-040 exam in first attempt should be a piece of cake.
Exam A QUESTION 1
Which two modifications can be made in the Ink Manager? (Choose two.)
A. removing all LAB colors
B. converting all RGB colors to CMYK
C. removing all spot colors from a document
D. creating an alias from one color to another
E. remapping spot colors to equivalent CMYK builds
Correct Answer: DE QUESTION 2
A dark spot color ink is spreading during trapping. How should you adjust this in the Ink Manager?
A. raise its neutral density
B. redesign the project to remove the need for trapping
C. adjust its sequence to a higher number in the printing order
D. reset the ink Type to Normal instead of Opaque or OpaqueIgnore
Correct Answer: A QUESTION 3
Using the Fix Hairlines tool to find and replace thin lines in a PDF document can be problematic if _____.
A. there are no hairlines in the PDF
B. an inappropriate unit of measure is chosen
C. it is used to replace hairlines in Type 3 fonts
D. widths are increased or decreased by whole integers
Correct Answer: C QUESTION 4
What does the Emit Printer Marks setting in the Marks and Bleeds panel of the Advanced Printer Setup dialog do?
A. specifies the cropbox size
B. creates all printer marks at once
C. determines the weight of printer mark lines
D. uses the printer marks embedded in the Adobe PDF file
Correct Answer: D QUESTION 5
Which mark is necessary if your project includes bleeds?
A. trim
B. bleed
C. registration
D. page information
Correct Answer: A QUESTION 6
Which element can the fixed from the Fix Hairlines dialog box?
A. trim marks
B. Type1 fonts
C. Photoshop images
D. gradient mesh objects
Correct Answer: A QUESTION 7
What should you do to remove a section of your document and use it as a separate PDF file?
A. choose Document > Delete Pages
B. choose Document > Extract Pages
C. choose Document > Replace Pages
D. choose File > Create PDF > From File
Correct Answer: B QUESTION 8
You want to change the font size of text by using the TouchUp Text tool.
You have highlighted the text.
What should you do?
A. choose Tools > Print Production
B. choose Tools > Advanced Editing
C. Control-click (Mac OS) or right-click (Windows) and choose Properties
D. Control-click (Mac OS) or right-click (Windows) and choose Create Artifact
Correct Answer: C QUESTION 9
You want to add a page number to the footer on all but the first page of your PDF document. The first page is an odd numbered page. Which option in the Page Options section of the Add Headers & Footers dialog box should you choose?
A. Odd Pages Only
B. Even Pages Only
C. Apply to All Pages
D. Apply to Page Range
Correct Answer: D QUESTION 10
You want to reduce the file size of an existing PDF document. You want to use the PDF Optimizer to discard unnecessary objects. Which option removes accessibility and reflow capabilities from the document?
A. Discard All Alternate Images
B. Discard Document Structure
C. Discard All JavaScript Actions
D. Discard Embedded Thumbnails
Correct Answer: B
Exam A
QUESTION 1
What attribute of the <cffunction> tag is used to make a ColdFusion component method accessible as a web service?
A. access = “public”
B. access = “remote”
C. webservice = “yes”
D. returnType = “webservice”
Correct Answer: B QUESTION 2
What are exception types for the <cfcatch> tag? (Choose THREE)
A. ftp
B. xml
C. lock
D. security
E. database
Correct Answer: CDE QUESTION 3
What attributes of the <cffunction> tag are optional in a ColdFusion component, but required if the method is used as a web service? (Choose TWO)
A. Name
B. Roles
C. Access
D. ReturnType
Correct Answer: CD QUESTION 4
What happens to the data because the OUTPUT attribute is NOT used? <cfwddx action=”CFML2WDDX” input=”#aCart#”>
A. nothing the page returns a syntax error
B. data is serialized but no data is outputted
C. data is serialized and outputted to the page
D. data is serialized and placed in the special variable wOutput
Correct Answer: C QUESTION 5
What is added to a URL to access the WSDL content for a ColdFusion web service?
A. /wsdl
B. ?wsdl
C. wsdl=yes
D. method=wsdl
Correct Answer: B QUESTION 6
What expression displays the string “Corfield”?
<employees>
<employee id=”1″>
<firstname>Raymond</firstname>
<lastname>Camden</lastname>
</employee>
<employee id=”2″>
<firstname>Sean</firstname>
<lastname>Corfield</lastname>
</employee>
</employees>
A. employees.employee.lastname[2]
B. employees.employee[2].lastname
C. employees.xmlchildren[2].lastname.xmlText
D. employees.xmlchildren[2].xmlchildren[2].lastname
Correct Answer: C
QUESTION 7
What is added to publish a CFC method as a WebService method?
A. access=”remote” attribute to the <cffunction> tag
B. webservice=”true” attribute to the <cffunction> tag
C. access=”remote” attribute to the <cfcomponent> tag
D. webservice=”true” attribute to the <cfcomponent> tag
Correct Answer: A
QUESTION 8
In what way are Web services consumed in a CFML page? (Choose TWO)
A. <cfhttp>
B. <cfinvoke>
C. <cfwebserver>
D. <cfcomponent>
E. createObject() within a <cfscript> block
Correct Answer: BE
QUESTION 9
What is NOT a means for invoking a web service?
A. <cfhttp>
B. <cfinvoke>
C. <cfservice>
D. createObject()
Correct Answer: C
QUESTION 10
In which order do the exception handling strategies listed provide increasingly more control over the application and code?
A. cferror ; cftry ; Site-Wide Error Template
B. Site-Wide Error Template ; cferror ; cftry
C. cftry ; Site-Wide Error Template ; cferror
D. Site-Wide Error Template ; cftry ; cferror
Correct Answer: B