Take advantage of the real Pass4itSure NetApp NS0-162 exam dump. They will enhance your understanding and mastery of the content of the exam in the shortest possible time. It’s very beneficial for you to pass the NetApp Certified Data Administrator (ONTAP) exam, greatly increasing your chances of success!
Get your NetApp NCDA certification with free NS0-162 exam questions:
QUESTION 1 #
You have an ESXi cluster with VMware VMFS LUNs on an AFF A400 system. After troubleshooting performance issues, you determine that timeout best practices are not set on the hosts.
In this scenario, which NetApp tool would apply the best practice settings?
A. SnapManager B. SAN Host Utilities C. SnapCenter Plug-in for VMware vSphere D. Virtual Storage Console (VSC)
You want to enable the internal ONTAP engine that quickly identifies the file and directory differences between two Snapshot copies. In this scenario, which feature would accomplish this task?
A. SnapCenter B. SnapDiff C. SnapVault D. SnapLock
You want to add SSDs to existing HDD aggregates. Which NetApp tool helps you to validate how many SSDs would improve performance?
A. OnCommand Workflow Automation B. Active IQ Unified Manager C. ONTAP System Manager D. Automated Workload Analyzer
Correct Answer: C
QUESTION 6
Click the Exhibit button.
You have an ONTAP 9.8 cluster. After network maintenance, the LIF that is shown in the exhibit is not always on a correct port and is unreachable by users until the LIFs are moved to port e0c or e0d on either storage node. In this scenario, which action should you take to ensure that the LIF only fails over to the correct ports?
A. Change the LIF\\’s failover policy to sfo-partner-only B. Split the broadcast domain C. Create a DNS load balancing zone D. Create an IPspace
Correct Answer: A
QUESTION 7
A volume is set to use Adaptive QoS with the default policy. In this scenario, which change would affect the QoS throughput ceiling?
A. The volume is resized B. Disks are added to the volume\\’s aggregate C. Data is added to the volume D. More clients access the volume
You need to configure data-at-rest encryption for your NetApp ONTAP 9.8 cluster. Your company does not have Key Management Interoperability Protocol (KMIP) services are available but must require a passphrase to be entered when a node is rebooted.
In this scenario, which two actions should be performed to satisfy these requirements? (Choose two.)
A. Enable onboard key management B. Enable common criteria mode C. Configure an external key management server D. Enable cluster-wide FIPS-compliant mode
You are asked to deploy a 2-node ONTAP Select cluster. The physical hardware is located in two different locations and you want the aggregates mirrored synchronously between the two data centers. You must ensure high availability and automated switchover.
In this scenario, which two steps would you take to fulfill this requirement? (Choose two.)
A. Use the ONTAP Mediator service to make sure that you have a quorum for the two nodes B. Use ONTAP Select Deploy to install the nodes on the physical hardware C. Ensure that the ONTAP Select Deploy VM resides at a third location other than the two data centers D. Install the SnapMirror Sync license on the cluster
Correct Answer: BC
QUESTION 10
Click the Exhibit button.
You are adding a NetApp AFF A400 system to an existing 4-node cluster and want to know which ports you would use to expand your cluster.
Referring to the exhibit, which tool would you use to accomplish this task?
A. NetApp Interoperability Matrix (IMT) B. NetApp Hardware Universe (HWU) C. Active IQ Unified Manager D. Active IQ Config Advisor
Correct Answer: B
QUESTION 11
Click the Exhibit button.
You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit. In this scenario, which two protocols are supported? (Choose two.)
You are attempting to establish a SnapMirror relationship between your ONTAP cluster (AcmeClus01) and a partner company\\’s ONTAP cluster (WidgetsClus01). The clusters are unable to establish a peering relationship. You perform a packet capture on WidgetsClus01 and do not see any packets from AcmeClus01. You also discover that the IP subnet that is used for WidgetsClus01\\’s intercluster LIFs overlaps with a local subnet at your company.
In this scenario, which feature would enable AcmeClus01 and WidgetsClus01 to peer with each other?
A. VLANs B. broadcast domains C. IPspaces D. ONTAP subnets
You want to configure Active Directory domain controller access for NetApp ONTAP cluster administration. In this scenario, which two actions would accomplish this task? (Choose two.)
A. Configure an authentication tunnel through an admin SVM B. Use the server active-directory create command to create a computer account on the domain for a CIFS SVM C. Configure an authentication tunnel through an existing CIFS SVM D. Use the server active-directory create command to create a computer account on the domain for a non-CIFS SVM
As we often say, work smarter, not harder. Increase your chances of success with NetApp NS0-162 exam dumps. Why not.
Don’t worry, trust Pass4itSure (with free materials and good values), Pass4itSure will always have a strong community and a coveted place in the certification world.
To obtain a Huawei-certified HCIA-Routing and Switching V2.5 H12-211 exam, you must be ready for the exam. The most important thing is the H12-211 exam dumps materials! But so many resources provide strange content in actual exams or don’t prepare us in a meaningful way. Therefore, Pass4itSure is different. Pass4itSure eliminates the problem and provides meaningful test preparation.
Pass4itSure H12-211 exam dumps (Link https://www.pass4itsure.com/h12-211.html PDF + VCE) provide real-world questions about simulated test sites and worksites to help you acquire the core skills and key competencies you need for Huawei certification and future careers.
Huawei HCIA-Routing & Switching V2.5 H12-211 PDF free download
Take advantage of this once-in-a-lifetime opportunity today. This is part of the real H12-211 exam question. After that, you must also devote enough time to complete your studies before you can pass.
Share some Huawei H12-211 exam questions and answers below:
QUESTION 1 #
Which of the following forms of DUID can be configured when DHCPv6 is configured in the VRP system? (multiple choice)
A. DUID-LL B. DUID-LLT C. DUID-EN D. DUID-LLC
Correct Answer: AB
QUESTION 2 #
The STP switch sends BPDUs. The correct statement about BPDU is (). (multiple choice)
A. BPDU is a frame using the IEEE802.3 standard B. BPDU is a frame using the Ethernet II standard C. The Control field value of the BPDU frame is 3 D. The destination MAC address of the BPDU frame is the broadcast address
Correct Answer: AC
QUESTION 3 #
What benefits does port aggregation yield? (Choose three)
A. Improves link bandwidth B. Implements load sharing C. Improves network reliability D. Facilitates data copy for analysis
Correct Answer: ABC
QUESTION 4 #
A layer 2 LAN switch generates CAM table entries according to the ( ) of the received frame.
A. Source MAC address B. Destination MAC address C. Source IP address D. Destination IP address
Correct Answer: A
QUESTION 5 #
The network administrator wishes to transmit data between two end stations. The network interface cards of both devices operate at 100Mbps however one supports half-duplex while the other uses full-duplex mode.
What will occur as a result?
A. The end stations cannot communicate. B. The end stations can communicate, but data may be lost during the transmission of large amounts of traffic. C. The end stations will operate normally D. The end stations can communicate, but speed is different during the transmission of large amounts of traffic
Correct Answer: B
QUESTION 6 #
InARP resolves the protocol address of the remote device on each virtual circuit, including IP addresses and IPX addresses.
A. True B. False
Correct Answer: A
QUESTION 7 #
Which of the following are routing protocols? (multiple choice)
A. IP B. OSPF C. BGP D. IPX
Correct Answer: BC
QUESTION 8 #
Which of the following port status may exist on an STP-enabled switch?
A. Forwarding B. Listening C. Discarding D. Disabled
Correct Answer: AB
QUESTION 9 #
As shown in the figure, after the network administrator finishes the Telnet configuration on the router, it finds that the host cannot establish a connection with the router through Telnet. Which options can help solve this problem? (multiple choice)
A. Check if the host\’s ARP cache table overflows B. Check if the switch is configured with the default gateway address. C. Use ping to check the IP connectivity between the host and router G0/0/0 interface D. Check if the Telnet configuration on the router is correct.
Correct Answer: CD
QUESTION 10 #
Which of the following protocols can be used on a Layer 2 network with redundant links to prevent loops?
A. UDP B. VRRP C. STP D. ARP
Correct Answer: C
QUESTION 11 #
Refer to the debug output. Following the configuration of R2, the administrator discovers that the behavior is not as expected and performs debugging. Based on the output from the debug, what is the source of the problem?
A. R2 has configured an ACL to block the route to network 1.0.0.0 B. R2 has enabled split horizon. C. R1 is using authentication, however, R2 is not. D. R2 is operating using RIPv2, while R1 is using RIPv1.
Correct Answer: D
QUESTION 12 #
Which of the following regarding Frame Relay DLCI is correct? (Choose three)
A. DLCI is locally significant B. DLCI is allocated by DTE C. The range of DLCI values that can be used is from 16-1007 D. The same DLCI can be configured on different physical interfaces
Correct Answer: ACD
QUESTION 13 #
SNMP packets are encapsulated in TCP packets.
A. True B. False
Correct Answer: B
The help of free H12-211exercise questions is also great, adding a point to your exam success. If you feel good, you can go get full at Pass4itSure.
The ultimate success in the Huawei H12-211 exam is no longer a dream.
Pass4itSure guarantees that you pass the Huawei H12-211-ENUC certification exam. You can visit here for the latest Huawei certification exam practice news.
Has anyone taken the Fortinet NSE6_FWF-6.4 exam? Curious if anyone can easily pass it, how hard is it? Whether anyone can provide insights. Don’t worry, Cert4sure to help you! It is not difficult to test with the right method, the right method is, not only relies on NSE6_FWF-6.4 test dumps data, but also strengthens the practice test questions, if you can reach 90 points per test, then pass very easily!
Pass4itSure is the best resource that provides reliable and authentic Fortinet NSE6_FWF-6.4 practice tests to get them into the real world of exams.
Fortinet NSE6_FWF-6.4 practice test free
QUESTION 1
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
A. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
B. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
C. DARRP measurements can be scheduled to occur at specific times.
D. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
Correct Answer: AD
RRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise, and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network.
When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
A. Configure the APs individually by overriding the settings in Managed FortiAPs B. Configure the controller for the correct country code for Germany C. Clone a suitable FortiAP profile and change the county code settings on the profile D. Create a new FortiAP profile and change the county code settings on the profile
Which statement is correct about security profiles on FortiAP devices?
A. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic B. Only bridge mode SSIDs can apply the security profiles C. Disable DTLS on FortiAP D. FortiGate performs inspection the wireless traffic
Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)
A. Gathering details about on site visitors B. Predicting the number of guest users visiting on-site C. Comparing current data with historical records D. Reporting potential threats by guests on site
Correct Answer: AB
QUESTION 5
Refer to the exhibits. Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
A. For both interfaces in the wtp-profile, configure set vaps to be “Authors” B. Disable intra-vap-privacy for the Authors vap-wireless network C. For both interfaces in the wtp-profile, configure vap-all to be manual D. Increase the transmission power of the AP radio interfaces
Correct Answer: BC
QUESTION 6
Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?
A. Security Fabric B. SSH C. HTTPS D. FortiTelemetry
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
A. Configure a tunnel mode wireless network and enable split tunneling to the local network B. Configure a bridge mode wireless network and enable the Local standalone configuration option C. Configure a bridge mode wireless network and enable the Local authentication configuration option D. Install supported FortiAP and configure a bridge mode wireless network
Correct Answer: A
QUESTION 8
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
A. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN B. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs C. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool D. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-ofsale and Io? devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
A. Increase the transmission power of the AP radios B. Enable frequency handoff on the AP to band steer clients C. Reduce the number of wireless networks being broadcast by the AP D. Install another AP in the reception area to improve available bandwidth
Correct Answer: A
QUESTION 10
Where in the controller interface can you find a wireless client\’s upstream and downstream link rates?
A. On the AP CLI, using the cw_diag ksta command B. On the controller CLI, using the diag wireless-controller wlac -d sta command C. On the AP CLI, using the cw_diag -d sta command D. On the controller CLI, using the WiFi Client monitor
Correct Answer: B
QUESTION 11
Refer to the exhibits. Exhibit A Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI. Which security mode is used by the wireless connection?
A. WPA2 Enterprise B. WPA3 Enterprise C. WPA2 Personal and radius MAC filtering D. Open, with radius MAC filtering
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
A. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility B. Areas with the signal strength weaker than -68 dB are cut out of the map C. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor D. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
Correct Answer: C
Maybe you also need Fortinet NSE6_FWF-6.4 pdf dumps
By passing the NSE6_FWF-6.4 practice test, you can easily prepare for NSE6_FWF-6.4. It is important to find a reliable practice test. Pass4itSure NSE6_FWF-6.4 dump is recommended here https://www.pass4itsure.com/nse6_fwf-6-4.html Complete NSE6_FWF-6.4 practice questions.
The NSE6_FWF-6.4 practice questions shared here, NSE6_FWF-6.4 PDFs are all partial practice questions, but are from the real Fortinet NSE6_FWF-6.4 exam dumps, rest assured that the exercises, if need to complete visit the Pass4itSure.
Passing the CyberArk CAU302 exam is a daunting task that requires concentration and determination. The CAU302 dumps from Pass4itSure make passing the exam a simple process because it provides exercise questions about the CAU302 exam.
I guess you don’t have these test questions yet? Don’t worry, because I’ll share it with you. To fully prepare and pass the CyberArk CAU302 exam, you must obtain an accurate CyberArk CAU302 exam dumps >>https://www.pass4itsure.com/cau302.html (Q&As: 234), which is a very important factor.
Good luck friend! Be confident in yourself, you got this!
Get the CyberArk CAU302 Exam Dumps in PDF Format:
You can access the CyberArk CAU302 exam preparation materials in PDF format from Google Drive:
Get the Latest CyberArk CAU302 Exam Questions and Answers:
When you have questions and answers, learning becomes simple. Pass4itSure provides you with the latest and updated CAU302 dumps materials.
Here is part of the newest CAU302 exam questions :
QUESTION 1 #
After the Vault administrator configures Syslog integration on the Vault, the Vault will be able to.
A. forward ITALOG records to Security Information and Event Management (SIEM). B. send out Simple Network Management Protocol (SNMP) traps. C. forward audit records to Security Information and Event Management (SIEM). D. forward emails to SIEM.
Correct Answer: C
QUESTION 2 #
What are the chief benefits of PSM? Choose all that apply
A. Privileged Session Isolation B. Automatic Password Management C. Privileged Session Recording D. A and C
Correct Answer: D
QUESTION 3 #
When working with the CyberArk Cluster, which service is considered Optional (i.e., failure of the service does not mandate a failover)?
A. PrivateArk Server B. PrivateArk Database C. Event Notification Engine D. Logic Container
Correct Answer: C
QUESTION 4 #
PSM requires the Remote Desktop Gateway role service.
A. TRUE B. FALSE
Correct Answer: B
QUESTION 5 #
Which Master Policy?
A. Password Expiration Time B. Enabling and Disabling of the Connection Through the PSM C. Password Complexity D. The use of “One-Time-Passwords”
Correct Answer: C
QUESTION 6 #
Using the SSH Key Manager it is possible to allow CPM to manage SSH Keys similarly to passwords.
A. TRUE B. FALSE
Correct Answer: A
QUESTION 7 #
Which file is used to integrate the Vault with your Radius server?
A. radius.ini B. parent in C. ENEConf.ini D. dbparm.ini
Correct Answer: D
QUESTION 8 #
A Logon Account can be specified in the Master Policy A. TRUE B. FALSE
Correct Answer: A
QUESTION 9 #
Which file does the Vault administrator need to edit in order to configure the integration of the Vault with the radius server?
A. radius.ini B. PARagent.ini C. ENEConf.ini D. dbparm.ini
Which of the following are prerequisites for installing PVWA Check all that Apply
A. Web Services Role B. NET 4.5.1 Framework Feature C. Remote Desktop Services Role D. Windows BitLocker
Correct Answer: A
QUESTION 11 #
What is the proper way to allow the Vault to resolve hostnames?
A. Define a DNS server B. Define a WINS server C. Defining the local host’s file D. The Vault cannot resolve hostnames due to security standards
Correct Answer: C
QUESTION 12 #
In Accounts Discovery, you can configure a Windows discovery to scan______________.
A. as many OUs as you wish B. up to three OUs. C. only one OU. D. a number of OUs determined by the OUstoScan setting under the Accounts Feed section in the Administration tab
Correct Answer: C
QUESTION 13 #
It is impossible to override Master Policy settings for a Platform
For the NetApp NCTA NS0-003 exam, exam is not so easy to pass, very clear that people do not want to waste hard-earned money on things that are not worth it. Successful passing of the exam requires finding: the most reliable and results-oriented NS0-003 practice questions (from NS0-003 exam dumps). Unique and up-to-date NS0-003 exam dumps links are shared as follows >> https://www.pass4itsure.com/ns0-003.html The materials it provides are always fresh and up-to-date.
100% Real NetApp NS0-003 Exam Questions Free
Get – 100% real NS0-003 exam questions based on the new Pass4itSure NS0-003 dumps.
QUESTION 1
Your users require both NFS and SMB file services. You do not want to manage the storage ONTAP System Manager or the command-line interface.
In this scenario, which two products would satisfy these requirements? (Choose two.)
A. Amazon S3 Glacier B. Azure Blob Storage C. Azure NetApp Files D. Cloud Volumes Service
QUESTION 2
Which two protocols are supported with an E-Series system? (Choose two.)
A. iSCSI B. NFS C. FC D. SMB
QUESTION 3
Which two tools would you use to manage your NetApp SolidFire SDS storage cluster? (Choose two.)
A. NetApp Active IQ Unified Manager B. NetApp Element UI C. NetApp Element Plug-in for VMware vCenter Server D. NetApp Cloud Manager
QUESTION 4
When creating a StorageGRID solution with two sites, how many storage nodes are rewired?
A. at least three nodes per site B. at least one node per site C. at least two nodes per site D. at least four nodes in total
QUESTION 5
Which three benefits of using NetApp Cloud Volumes ONTAP for AWS? (Choose three.)
A. automatic tiering to Amazon S3 for cost reduction B. automatic replication to Cloud Volumes Service with SnapMirror C. ONTAP thin provisioning for space efficiency and over-provisioning D. NetApp Aggregate Encryption (NAE) with Onboard Key Manager E. ONTAP data reduction mechanisms with compression and deduplication
QUESTION 6
You are asked to create and manage working environments in NetApp Cloud Manager. In this scenario, which user role would enable you to perform this assignment?
A. Cluster Admin B. Compliance Viewer C. Storage Admin D. Account Admin
QUESTION 7
Cloud Manager would be used to manage which two NetApp storage resources? (Choosetwo.)
A. NetApp StorageGRID B. NetApp Cloud Volumes ONTAP C. NetApp All Flash FAS (AFF) D. NetApp E-Series
QUESTION 8
Which two enable you to tier data that is stored in an ONTAP system to an object store? (Choose two.)
A. FlexGroup B. CloudSync C. FabricPool D. Cloud Tiering
QUESTION 9
What provides dynamic storage orchestration services for Kubernetes workloads?
A. Ansible B. SANtricity OS C. Trident D. ONTAP software
QUESTION 10
Which software references NetApp ONTAP Snapshot metadata to create writable, point-in-time copies of a volume?
A. SnapVault B. FlexClone C. SnapLock D. FlexCache
QUESTION 11
Which two NetApp features encrypt the storage data? (Choose two.)
A. Trusted Platform Module (TPM) B. Encrypted File System (EFS) C. NetApp Volume Encryption D. NetApp Storage Encryption
QUESTION 12
Which attribute of a host is used to route packs to a non-local subnet?
A. VLAN trunk B. default gateway C. NTP server D. DNS server
QUESTION 13
You want your developers to be able to request storage on private and public cloud locations using a single API endpoint.
In this scenario, which NetApp service provides this capability?
A. Cloud Manager B. Cloud Sync C. Cloud Volumes ONTAP D. Cloud Volumes Services
The answer is at the end of the article. It is better to practice and learn independently without looking at the answer. When you are done, check the answer and analysis.
NetApp NCTA NS0-003 Exam Dumps PDF free download
The best NS0-003 exam dumps PDF is the perfect help for preparing for the exam.
Getting exercise questions is important for the NetApp NS0-003 exam, and the latest exam dumps contain the latest practice questions >> https://www.pass4itsure.com/ns0-003.html ( NS0-003 PDF plus NS0-003 VCE), just get, don’t act，no. Pass the NetApp NS0-003 exam, to act, practice NS0-003 exam questions daily, I believe that passing the exam is within reach.
