Get the newest free complete Fortinet NSE7_EFW-6.2 exam dumps! Go https://www.pass4itsure.com/nse7_efw-6-2.html (Q&As: 102 ). Best 100% valid up-to-date actual Fortinet NSE7_EFW-6.2 dumps that bring you the best results. You can get 100% free updates on Fortinet NSE7_EFW-6.2 practice test questions, Fortinet NSE7_EFW-6.2 pdf here.
Latest Fortinet NSE7_EFW-6.2 Exam Questions From Youtube
https://youtu.be/-kSg9jnShxM
New Fortinet NSE7_EFW-6.2 Practice Test Q1-Q13 Free
QUESTION 1 Examine the output of the `get router info bgp summary\\’ command shown in the exhibit; then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.) A. BGP state of the peer 10.125.0.60 is Established. B. BGP peer 10.200.3.1 has never been down since the BGP counters were cleared. C. Local BGP peer has not received an OpenConfirm from 10.200.3.1. D. The local BGP peer has received a total of 3 BGP prefixes. Correct Answer: AC
QUESTION 2 View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.
Why didn\\’t the tunnel come up? A. The pre-shared keys do not match. B. The remote gateway\\’s phase 2 configuration does not match the local gateway\\’s phase 2 configuration. C. The remote gateway\\’s phase 1 configuration does not match the local gateway\\’s phase 1 configuration. D. The remote gateway is using aggressive mode and the local gateway is configured to use man mode. Correct Answer: C
QUESTION 3 A FortiGate\\’s portal is connected to a private network. Its port2 is connected to the Internet. Explicit web proxy is enabled in port1 and only explicit web proxy users can access the Internet. Web cache is NOT enabled. An internal web proxy user is downloading a file from the Internet via HTTP. Which statements are true regarding the two entries in the FortiGate session table related to this traffic? (Choose two.) A. Both session have the local flag on. B. The destination IP addresses of both sessions are IP addresses assigned to FortiGate\\’s interfaces. C. One session has the proxy flag on, the other one does not. D. One of the sessions has the IP address of port2 as the source IP address. Correct Answer: AD
QUESTION 4 Examine the output of the `diagnose sys session list expectation\\’ command shown in the exhibit; then answer the question below.
Which statement is true regarding the session in the exhibit? A. It was created by the FortiGate kernel to allow push updates from FotiGuard. B. It is for management traffic terminating at the FortiGate. C. It is for traffic originated from the FortiGate. D. It was created by a session helper or ALG. Correct Answer: D
QUESTION 5 The logs in a FSSO collector agent (CA) are showing the following error: failed to connect to registry: PIKA1026 (192.168.12.232) What can be the reason for this error? A. The CA cannot resolve the name of the workstation. B. The FortiGate cannot resolve the name of the workstation. C. The remote registry service is not running in the workstation 192.168.12.232. D. The CA cannot reach the FortiGate with the IP address 192.168.12.232. Correct Answer: C https://kb.fortinet.com/kb/documentLink.do?externalID=FD30548 QUESTION 6 When does a RADIUS server send an Access-Challenge packet? A. The server does not have the user credentials yet. B. The server requires more information from the user, such as the token code for two-factor authentication. C. The user credentials are wrong. D. The user account is not found on the server. Correct Answer: B
QUESTION 7 Examine the output of the `get router info OSPF neighbor\\’ command shown in the exhibit; then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.) A. The interface ToRemote is OSPF network type point-to-point. B. The OSPF router with the ID 0.0.0.2 is the designated router for the ToRemote network. C. The local FortiGate is the backup designated router for the wan1 network. D. The OSPF routers with the IDs 0.0.0.69 and 0.0.0.117 are both designated routers for the wan1 network. Correct Answer: AC https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html
QUESTION 8 View the exhibit, which contains the output of a diagnose command, and then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.) A. FortiGate will probe 121.111.236.179 every fifteen minutes for a response. B. Servers with the D flag are considered to be down. C. Servers with a negative TZ value are experiencing a service outage. D. FortiGate used 209.222.147.3 as the initial server to validate its contract. Correct Answer: AD A ? because the flag is Failed so FortiGate will check if a server is available every 15 min D-state is I, contact to validate contract info
QUESTION 9 View the exhibit, which contains the output of a diagnose command, and answer the question below.
Which statements are true regarding the Weight value? A. Its initial value is calculated based on the round trip delay (RTT). B. Its initial value is statically set to 10. C. Its value is incremented with each packet lost. D. It determines which FortiGuard server is used for license validation. Correct Answer: C
QUESTION 10 An administrator has configured a dial-up IPsec VPN with one phase 2, extended authentication (XAuth) and IKE mode configuration. The administrator has also enabled the IKE real-time debug: diagnose debug application like-1 diagnose debug enable In which order is each step and phase displayed in the debug output each time a new dial-up user is connecting to the VPN? A. Phase1; IKE mode configuration; XAuth; phase 2. B. Phase1; XAuth; IKE mode configuration; phase2. C. Phase1; XAuth; phase 2; IKE mode configuration. D. Phase1; IKE mode configuration; phase 2; XAuth. Correct Answer: B https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-ipsecvpn-54/IPsec_VPN_Concepts/IKE_Packet_Processing.htm
QUESTION 11 What global configuration setting changes the behavior for content-inspected traffic while FortiGate is in the system conserve mode? A. av-failopen B. mem-failopen C. utm-failopen D. ips-failopen Correct Answer: A https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-security-profiles- 54/Other_Profile_Considerations/Conserve%20mode.htm
QUESTION 12 When using the SSL certificate inspection method to inspect HTTPS traffic, how does FortiGate filter web requests when the client browser does not provide the server name indication (SNI) extension? A. FortiGate uses the requested URL from the user\\’s web browser. B. FortiGate uses the CN information from the Subject field in the server certificate. C. FortiGate blocks the request without any further inspection. D. FortiGate switches to the full SSL inspection method to decrypt the data. Correct Answer: B
QUESTION 13 Which two tasks are automated using the Install Wizard on FortiManager? (Choose two.) A. Preview pending configuration changes for managed devices. B. Add devices to FortiManager. C. Import policy packages from managed devices. D. Install configuration changes to managed devices. E. Import interface mappings from managed devices. Correct Answer: AD https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device% 20Manager/1200_install_to%20devices/0400_Install% 20wizard-device%20settings.htm There are 4 main wizards: Add Device: is used to add devices to central management and import their configurations. Install: is used to install configuration changes from Device Manager or Policies and Objects to the managed devices. It allows you to preview the changes and, if the administrator doesn\\’t agree with the changes, cancel and modify them. Import policy: is used to import interface mapping, policy database, and objects associated with the managed devices into a policy package under the Policy and Object tab. It runs with the Add Device wizard by default and may be run at any time from the managed device list. Re-install policy: This is used to perform a quick install of the policy package. It doesn\\’t gives the ability to preview the changes that will be installed to the managed device.
Latest Fortinet NSE7_EFW-6.2 questions answers in order to lead every candidate towards a brighter and better future. Select https://www.pass4itsure.com/nse7_efw-6-2.html to get complete Fortinet NSE7_EFW-6.2 dumps practice exam questions and answers. Wish you success!
Get the newest free complete Fortinet NSE4_FGT-6.4 exam dumps! Go to https://www.pass4itsure.com/nse4_fgt-6-4.html (Q&As: 142 ). Best 100% valid up-to-date actual Fortinet NSE4_FGT-6.4 dumps that bring you the best results. You can get 100% free updates on Fortinet NSE4_FGT-6.4 practice test questions, Fortinet NSE4_FGT-6.4 pdf here.
Latest Fortinet NSE4_FGT-6.4 Exam Questions From Youtube
https://youtu.be/MyxA9tvUXxQ
New Fortinet NSE4_FGT-6.4 Practice Test Q1-Q13 Free
QUESTION 1 Refer to the exhibit.
The exhibit shows proxy policies and proxy addresses, the authentication rule and authentication scheme, users, and firewall address. An explicit web proxy is configured for subnet range 10.0.1.0/24 with three explicit web proxy policies. The authentication rule is configured to authenticate HTTP requests for subnet range 10.0.1.0/24 with a form-based authentication scheme for the FortiGate local user database. Users will be prompted for authentication. How will FortiGate process the traffic when the HTTP request comes from a machine with the source IP 10.0.1.10 to the destination http://www.fortinet.com? (Choose two.) A. If a Mozilla Firefox browser is used with User-B credentials, the HTTP request will be allowed. B. If a Google Chrome browser is used with User-B credentials, the HTTP request will be allowed. C. If a Mozilla Firefox browser is used with User-A credentials, the HTTP request will be allowed. D. If a Microsoft Internet Explorer browser is used with User-B credentials, the HTTP request will be allowed. Correct Answer: AD
QUESTION 2 If Internet Service is already selected as Source in a firewall policy, which other configuration objects can be added to the Source filed of a firewall policy? A. IP address B. Once Internet Service is selected, no other object can be added C. User or User Group D. FQDN address Correct Answer: A Reference: https://docs.fortinet.com/document/fortigate/6.2.5/cookbook/179236/using-internet-service-inpolicy
QUESTION 3 An organization\\’s employee needs to connect to the office through a high-latency internet connection. Which SSL VPN setting should the administrator adjust to prevent the SSL VPN negotiation failure? A. Change the session-ttl. B. Change the login timeout. C. Change the idle-timeout. D. Change the udp idle timer. Correct Answer: B
QUESTION 4 Refer to the exhibit.
Which contains a network diagram and routing table output. The Student is unable to access Webserver. What is the cause of the problem and what is the solution for the problem? A. The first packet sent from Student failed the RPF check. This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1. B. The first reply packet for Student failed the RPF check. This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1. C. The first reply packet for Student failed the RPF check. This issue can be resolved by adding a static route to 203.0.114.24/32 through port3. D. The first packet sent from Student failed the RPF check. This issue can be resolved by adding a static route to 203.0.114.24/32 through port3. Correct Answer: C
QUESTION 5 What inspection mode does FortiGate use if it is configured as a policy-based next-generation firewall (NGFW)? A. Full Content inspection B. Proxy-based inspection C. Certificate inspection D. Flow-based inspection Correct Answer: B QUESTION 6 Refer to the exhibit, which contains a session diagnostic output.
Which statement is true about the session diagnostic output? A. The session is a UDP unidirectional state. B. The session is in TCP ESTABLISHED state. C. The session is a bidirectional UDP connection. D. The session is a bidirectional TCP connection. Correct Answer: B
QUESTION 7 Which two configuration settings are synchronized when FortiGate devices are in an active-active HA cluster? (Choose two.) A. FortiGuard web filter cache B. FortiGate hostname C. NTP D. DNS Correct Answer: CD
QUESTION 8 Examine the exhibit, which contains a virtual IP and firewall policy configuration.
The WAN (port1) interface has the IP address 10.200.1.1/24. The LAN (port2) interface has the IP address 10.0.1.254/24. The first firewall policy has NAT enabled on the outgoing interface address. The second firewall policy is configured with a VIP as the destination address. Which IP address will be used to source NAT the Internet traffic coming from a workstation with the IP address 10.0.1.10/24? A. 10.200.1.10 B. Any available IP address in the WAN (port1) subnet 10.200.1.0/24 C. 10.200.1.1 D. 10.0.1.254 Correct Answer: B https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-firewall-52/Firewall%20Objects/Virtual%20IPs.htm
QUESTION 9 Examine this PAC file configuration.
Which of the following statements are true? (Choose two.) A. Browsers can be configured to retrieve this PAC file from the FortiGate. B. Any web request to the 172.25.120.0/24 subnet is allowed to bypass the proxy. C. All requests not made to Fortinet.com or the 172.25.120.0/24 subnet, have to go through altproxy.corp.com: 8060. D. Any web request fortinet.com is allowed to bypass the proxy. Correct Answer: AD
QUESTION 10 Which statements best describe auto discovery VPN (ADVPN). (Choose two.) A. It requires the use of dynamic routing protocols so that spokes can learn the routes to other spokes. B. ADVPN is only supported with IKEv2. C. Tunnels are negotiated dynamically between spokes. D. Every spoke requires a static tunnel to be configured to other spokes so that phase 1 and phase 2 proposals are defined in advance. Correct Answer: AC
QUESTION 11 An administrator is running the following sniffer command:
Which three pieces of Information will be Included in me sniffer output? (Choose three.) A. Interface name B. Packet payload C. Ethernet header D. IP header E. Application header Correct Answer: BCE QUESTION 13 Refer to the exhibit to view the application control profile.
Users who use Apple FaceTime video conferences are unable to set up meetings. In this scenario, which statement is true? A. Apple FaceTime belongs to the custom monitored filter. B. The category of Apple FaceTime is being monitored. C. Apple FaceTime belongs to the custom blocked filter. D. The category of Apple FaceTime is being blocked. Correct Answer: A
Latest Fortinet NSE4_FGT-6.4 questions answers in order to lead every candidate towards a brighter and better future. Select https://www.pass4itsure.com/nse4_fgt-6-4.html to get complete Fortinet NSE4_FGT-6.4 dumps practice exam questions and answers. Wish you success!
Get the newest free complete NetApp NS0-173 exam dumps! Go https://www.pass4itsure.com/ns0-173.html (Q&As: 60 ). Best 100% valid up-to-date actual NetApp NS0-173 dumps that bring you the best results. You can get 100% free updates on NetApp NS0-173 practice test questions, NS0-173 pdf here.
QUESTION 1 A customer with a FlexPod Express configuration is currently operating Linux servers. The company wants to move to a The windows-centralized access method for the NetApp storage component. In this scenario, which two ONTAP features must be configured? (Choose two.) A. Active Directory security model B. SVM with the SMB protocol enabled C. Workgroup security model D. SVM with the NFS protocol enabled Correct Answer: AB
QUESTION 2 A customer is designing a FlexPod solution with VMware 6.x in a SAN boot environment using FCoE. The customer has predetermined the WWPN values for the NetApp LIFs and the UCS vHBAs. The customer is now working on the design workflow for the SAN boot process. In this scenario, which three FlexPod environment objects are required for SAN connectivity? (Choose three.) A. NetApp export policies B. UCS boot policies C. UCS IQN pools D. initiator groups E. FC zones Correct Answer: ABC
QUESTION 3 You are configuring Cisco UCS servers for FC SAN boot and want to perform zoning on your Cisco Nexus 5000 series switches. In this scenario, which statement is correct? A. The corresponding FC ports on your NetApp storage array must be configured in LACP mode. B. An iSCSI license on the NetApp storage controller is required. C. SAN links are required between the Cisco Fabric Interconnects and the Nexus 5000 switches. D. FC zoning on the Nexus series switches is not supported; zoning can be done only on the Cisco Fabric Interconnects. Correct Answer: D Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_2_chapter_011011.html
QUESTION 4 A customer is using a FlexPod implementation that has 10 Gbps uplinks from the B-Series chassis to the fabric interconnect. The customer wants to upgrade the links to 40 Gbps. In this scenario, which model of Cisco UCS server IOM is required? A. 2204XP. B. 2208XP C. 2232 D. 2304 Correct Answer: A The Cisco UCS 2204XP Fabric Extender (Figure 7) has four 10 Gigabit Ethernet, FCoE-capable, SFP+ ports that connect the blade chassis to the fabric interconnect. Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-b-series-blade-servers/spec_sheet_c17644224.pdf
QUESTION 5 Click the Exhibit button.
A customer wants to ensure that FlexPod Datacenter connections to the storage layer are highly available. Which two configurations shown in the exhibit satisfy the customer\\’s requirements? (Choose two.) A. I. B. II. C. III. D. IV Correct Answer: CD
QUESTION 6 Which command would a FlexPod administrator use to determine whether an FC initiator has logged on to the fabric? A. MDS9148>show fcfwd B. MDS9148>show fcdomain C. MDS9148>show fcc D. MDS9148>show flogi database Correct Answer: D Reference: https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2017/pdf/BRKDCN-1121.pdf
QUESTION 8 A customer has deployed a FlexPod Datacenter with Red Hat Enterprise Linux OpenStack Platform. The Cinder storage volumes that are attached to the Nova instances are not available. Based on the terms of the cooperative support model, which three companies would the customer use to open a support case? (Choose three.) A. Cisco B. VMware C. Microsoft D. NetApp E. Red Hat Correct Answer: ADE Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/UCS_CVDs/flexpod_openstack_osp6_design.html
QUESTION 9 Your customer has a FlexPod solution with a 2-node switchless ONTAP system, Cisco Nexus 93108 switches, and Cisco UCS B-Series servers. The customer wants to expand to a 4-node ONTAP storage cluster. Which configuration is valid for expansion? A. Use the existing Nexus 93108 switches for the cluster interconnect. B. Add two Nexus 3232C switches for the cluster interconnect. C. Add two Nexus 93108 switches for the cluster interconnect. D. Add one Nexus 3232C switch for the cluster interconnect. Correct Answer: B
QUESTION 10 A customer is designing a FlexPod Datacenter with Cisco UCS C-Series servers. They intend to manage the solution with the Cisco UCS Manager. They want to cable the servers to the Cisco UCS Fabric Interconnects. In this scenario, which three configurations are supported? (Choose three.) A. Cluster mode B. Direct Connect mode C. SingleConnect mode D. DualWire Management mode E. Multipath mode Correct Answer: BCD Dual-wire Management (Shared LOM): Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management. SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco VIC card connects one cable that can carry both data traffic and management traffic. This feature is referred to as SingleConnect. Direct Connect Mode: Cisco UCS Manager supports an option to connect the Cisco UCS C-Series Rack-Mount Server directly to the FIs. This option enables Cisco UCS Manager to manage the Cisco UCS C-Series Rack-Mount Servers using a single cable for both management traffic and data traffic. The Cisco UCS VIC connects to the FI of the system. This connection uses a single connection from each VIC to each FI. Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm4-0/b_CSeriesIntegration_UCSM4-0/b_C-Series-Integration_UCSM4-0_chapter_01.html
QUESTION 11 Click the Exhibit button.
You are designing a FlexPod Datacenter solution for Microsoft Windows 2012 with Hyper-V. All hosts will boot from the SAN, including management hosts. The management hosts are Cisco C-Series servers. Referring to the exhibit, which adapters are required to boot the management servers from the SAN? A. two 1GbE NICs B. two 10GbE CNAs C. two 10GbE NICs D. two 8Gb HBAs Correct Answer: C
QUESTION 12 Which port type would you configure when you connect a chassis to the Cisco Fabric Interconnects? A. Ethernet uplink ports B. FC storage ports C. server ports D. appliance ports Correct Answer: B Reference: https://www.netapp.com/media/12424-tr4036.pdf (16)
Latest NetApp NS0-173 questions answers in order to lead every candidate towards a brighter and better future. Select https://www.pass4itsure.com/ns0-173.html to get complete NetApp NS0-173 dumps practice exam questions and answers. Wish you success!
Get the newest free complete Fortinet NSE4_FGT-6.4 exam dumps! Go https://www.pass4itsure.com/nse4_fgt-6-4.html (Q&As: 142 ). Best 100% valid up-to-date actual Fortinet NSE4_FGT-6.4 dumps that bring you the best results. You can get 100% free updates on Fortinet NSE4_FGT-6.4 practice test questions, Fortinet NSE4_FGT-6.4 pdf here.
Latest Fortinet NSE4_FGT-6.4 Exam Questions From Youtube
https://youtu.be/OJZQHRBqE88
New Fortinet NSE4_FGT-6.4 Practice Test Q1-Q13 Free
QUESTION 1 An administrator has configured a strict RPF check on FortiGate. Which statement is true about the strict RPF check? A. The strict RPF check is run on the first sent and reply packet of any new session. B. Strict RPF checks the best route back to the sourceusingtheincoming interface. C. Strict RPF checks only for the existence of at cast one active route back to the source using the incoming interface. D. Strict RPF allows packets back to sources with all active routes. Correct Answer: A
QUESTION 2 Examine the two static routes shown in the exhibit, then answer the following question.
Which of the following is the expected FortiGate behavior regarding these two routes to the same destination? A. FortiGate will load balance all traffic across both routes. B. FortiGate will use the port1 route as the primary candidate. C. FortiGate will route twice as much traffic to the port2 route D. FortiGate will only actuate the port1 route in the routing table Correct Answer: B “If multiple static routes have the same distance, they are all active; however, only the one with the lowest priority is considered the best path.”
QUESTION 3 Examine the IPS sensor and DoS policy configuration shown in the exhibit, then answer the question below.
When detecting attacks, which anomaly, signature, or filter will FortiGate evaluate first? A. SMTP.Login.Brute.Force B. IMAP.Login.brute.Force C. ip_src_session D. Location: server Protocol: SMTP Correct Answer: B
QUESTION 4 An administrator does not want to report the logon events of service accounts to FortiGate. What setting on the collector agent is required to achieve this? A. Add the support of NTLM authentication. B. Add useraccounts to Active Directory (AD). C. Add user accounts to the FortiGate group fitter. D. Add user accounts to the Ignore User List. Correct Answer: C
QUESTION 5 Which statement regarding the firewall policy authentication timeout is true? A. It is an idle timeout. The FortiGate considers a user to be “idle” if it does not see any packets coming from the user\\’s source IP. B. It is a hard timeout. The FortiGate removes the temporary policy for a user\\’s source IP address after this timer has expired. C. It is an idle timeout. The FortiGate considers a user to be “idle” if it does not see any packets coming from the user\\’s source MAC. D. It is a hard timeout. The FortiGate removes the temporary policy for a user\\’s source MAC address after this timer has expired. Correct Answer: A
QUESTION 6 Refer to the exhibits to view the firewall policy (Exhibit A) and the antivirus profile (Exhibit B).
Which statement is correct if a user is unable to receive a block replacement message when downloading an infected file for the first time? A. The firewall policy performs the full content inspection on the file. B. The flow-based inspection is used, which resets the last packet to the user. C. The volume of traffic being inspected is too high for this model of FortiGate. D. The intrusion prevention security profile needs to be enabled when using flow-based inspection mode. Correct Answer: A
QUESTION 7 Refer to the exhibits.
The SSL VPN connection fails when a user attempts to connect to it. What should the user do to successfully connect to SSL VPN? A. Change the SSL VPN port on the client. B. Change the Server IP address. C. Change the idle-timeout. D. Change the SSL VPN portal to the tunnel. Correct Answer: D
QUESTION 8 Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up. but phase 2 fails to come up. Based on the phase 2 configuration shown in the exhibit, what configuration change will bring phase 2 up? A. On HQ-FortiGate,enable Auto-negotiate. B. On Remote-FortiGate, set Seconds to 43200. C. On HQ-FortiGate,enable Diffie-Hellman Group 2. D. On HQ-FortiGate, set Encryption to AES256. Correct Answer: D
QUESTION 9 Which statement correctly describes NetAPI polling mode for the FSSO collector agent? A. The collector agent uses a Windows API to query DCs for user logins. B. NetAPI polling can increase bandwidth usage in large networks. C. The collector agent must search security event logs. D. The NetSessionEnum functionis user] to track user logouts. Correct Answer: A
QUESTION 10 Why does FortiGate Keep TCP sessions in the session table for several seconds, even after both sides (client and server) have terminated the session? A. To allow for out-of-order packets that could arrive after the FIN/ACK packets B. To finish any inspection operations C. To remove the NAT operation D. To generate logs Correct Answer: B
QUESTION 11 An administrator has configured the following settings:
What are the two results of this configuration? (Choose two.) A. Device detection on all interfaces is enforced for 30 minutes. B. Denied users are blocked for 30 minutes. C. A session for denied traffic is created. D. The number of logs generated by denied traffic is reduced. Correct Answer: CD Reference:https://kb.fortinet.com/kb/documentLink.do?externalID=FD46328
QUESTION 12 Examine this PAC file configuration.
Which of the following statements are true? (Choose two.) A. Browsers can be configured to retrieve this PAC file from the FortiGate. B. Any web request to the 172.25.120.0/24 subnet is allowed to bypass the proxy. C. All requests not made to Fortinet.com or the 172.25.120.0/24 subnet, have to go through altproxy.corp.com: 8060. D. Any web request fortinet.com is allowed to bypass the proxy. Correct Answer: AD
QUESTION 13 Which two settings can be separately configured per VDOM on a FortiGate device? (Choose two.) A. System time B. FortiGuaid update servers C. Operating mode D. NGFW mode Correct Answer: AD
Latest Fortinet NSE4_FGT-6.4 questions answers in order to lead every candidate towards a brighter and better future. Select https://www.pass4itsure.com/nse4_fgt-6-4.html to get complete Fortinet NSE4_FGT-6.4 dumps practice exam questions and answers. Wish you success!
Get the newest free complete CyberArk CAU302 exam dumps! Go https://www.pass4itsure.com/cau302.html (Q&As: 222 ). Best 100% valid up-to-date actual CyberArk CAU302 dumps that bring you the best results. You can get 100% free updates on CyberArk CAU302 practice test questions, CyberArk CAU302 pdf here.
Latest CyberArk CAU302 Exam Questions From Youtube
https://youtu.be/llwH85bBIYs
New CyberArk CAU302 Practice Test Q1-Q13 Free
QUESTION 1 Which report could show all audit data in the vault? A. Privileged Account Compliance Status Report B. Activity Log C. Privileged Account Inventory Report D. Application Inventory Report Correct Answer: A
QUESTION 2 DRAG DROP In version 10.7 the correct order of installation for components changed. Make the necessary corrections to the list below to show the new installation order. Select and Place:
Correct Answer:
QUESTION 3 A SIEM integration allows you to forward audit records to a monitoring solution. A. TRUE B. FALSE Correct Answer: A
QUESTION 4 Which user(s) can access all passwords in the vault A. Administrator B. Any member of Vault Admins C. Any member of Auditors D. Master Correct Answer: D
QUESTION 5 The vault does not support Subnet Based Access Control. A. TRUE B. FALSE Correct Answer: B
QUESTION 6 What conditions must be met in order to log into the vault as the Master user? Select all that apply. A. Logon must be originated from the console of the Vault server or an EmergencyStation defined in DBParm.ini B. User must provide the correct master password. C. Logon requires the Recovery Private Key to be accessible to the vault. D. Logon must satisfy a challenge-response request. Correct Answer: AB
QUESTION 7 Auto-Detection can be configured to leverage LDAP/S. A. TRUE B. FALSE Correct Answer: B
QUESTION 8 Which of the following statements are NOT true when enabling PSM recording for a target Windows server? A. The PSM software must be installed on the target server. B. PSM must be enabled in the Master Policy (either directly, or through an exception). C. PSMConnect must be added as a local user on the target server. D. RDP must be enabled on the target server. Correct Answer: A
QUESTION 9 Vault admins must manually add the auditor’s group to newly created safes so auditors will have sufficient access to run reports. A. TRUE B. FALSE Correct Answer: B
QUESTION 10 The Vault needs to send SNMP traps to an SNMP solution. In which configuration file do you set the IP address of the SNMP solution? A. PARAgent.ini B. dbparm.ini C. ENEConf.ini D. my.ini Correct Answer: A
QUESTION 11 The Application Inventory report is related to AIM. A. TRUE B. FALSE Correct Answer: A
QUESTION 12 What is the purpose of the Interval setting in a CPM policy? A. To control how often the CPM looks for System Initiated CPM work B. To control how often the CPM looks for User Initiated CPM work. C. To control how long the CPM rests between password changes D. To control the maximum amount of time the CPM will wait for a password change to complete Correct Answer: A
QUESTION 13 DRAG DROP Match the log file name with the CyberArk Component that generates the log. Select and Place:
Latest CyberArk CAU302 questions answers in order to lead every candidate towards a brighter and better future. Select https://www.pass4itsure.com/cau302.html to get complete CyberArk CAU302 dumps practice exam questions and answers. Wish you success!
