Flydumps Adobe 9A0-040 exam questions and answers in PDF are prepared by our expert, Moreover, they are based on the recommended syllabus covering all the Adobe 9A0-040 exam objectives.You will find them to be very helpful and precise in the subject matter since all the Adobe 9A0-040 exam content is regularly updated and has been checked for accuracy by our team of SAP expert professionals.
QUESTION 21
Which automation mode in the Audio Mixer window should you use if you want automation to start only when you begin to adjust a value, and the value to remain where it is when you stop adjusting it.
A. Latch
B. Touch
C. Read
D. Write
Correct Answer: A QUESTION 22
Which is a valid purpose for exporting video with sequence markers?
A. To mark important points in individual clips in the sequence.
B. To add subtitles to a sequence.
C. To create Web links or chapter links in an exported sequence.
D. To view a comment in the Program monitor when the CTI is cued to the marker.
Correct Answer: C QUESTION 23
You are working with a sequence that will be exported to a movie for streaming Web playback. Which three encoding formats should you choose? (Choose three)
A. RealMedia
B. MPEG2
C. Microsoft DV
D. QuickTime
E. MPEG1
F. Windows Media
Correct Answer: ADF QUESTION 24
Which is a valid use for a reference monitor?
A. Viewing multiple source clips at once.
B. Viewing the sequence in a secondary monitor, usually for the purpose of color correction or color matching.
C. Ganging the Source and Program views together.
D. Arranging the windows to simulate older versions of Premiere.
Correct Answer: B QUESTION 25
You are working on your sequence and realize that you chose the wrong preset when you started the project. The audio sample rate of your project is 32kHz, but the sample rate of your source media audio is 48kHz. You do NOT want to downsample your audio. What should you do?
A. Nest the sequence in a new sequence that uses the proper sample rate.
B. Continue working, but make sure to export the project at 48kHz.
C. Start a new project with the 48kHz setting and import the sequence you were working on into that project.
D. change the audio sample rate to 48kHz in the General panel of the Project Settings dialog box,
Correct Answer: C QUESTION 26
A still image has a duration of 2 seconds in a project that is set to 30 frames per second. Which procedure will create a 2-second clip instead of 60 frames at 1/30 of a second each?
A. Select Millions of Colors from the Color Depth menu in the Video Rendering submenu of the Project Settings dialog box.
B. Select Scale Clips to Project Dimensions when Adding to Sequence from the General menu of the Project Settings dialog box.
C. Select Optimize Stills in the Video Rendering submenu of the Project Settings dialog box.
D. Select an appropriate codec from the Compressor menu in the Video Rendering submenu of the Project Settings dialog box.
Correct Answer: C
QUESTION 27
Your sequence has several clips on the Timeline. The edit points for the clips are timed to the beat of a music soundtrack. The edit point between the third and fourth clips are NOT in sync with the music. You want to drag the edit point between clips three and four to the correct location WITHOUT affecting any of the other edit points. Which tool should you use?
A. Pen
B. Rolling Edit
C. Ripple Edit
D. Slip
Correct Answer: B
QUESTION 28
Which action can be performed while using the Capture window and playing back a tape for viewing or capture?
A. Changing the folder where clips are logged.
B. Changing the scratch disk.
C. Entering information about the next clip.
D. Logging clips to a batch list.
Correct Answer: C
QUESTION 29
You are working in the Adobe Title Designer. You want your title to begin off screen, roll from the bottom to the top, and finish off screen. What should you do?
A. Create your text. Right-click the text box and choose Roll From Bottom to Top, and check Start Off Screen and End Off Screen.
B. Create your text. Choose Title > Roll/Crawl Options and check Roll From Bottom to Top.
C. Select Roll from the Title Type pop up menu. Create your text. Choose Title > Roll/Crawl Options and check Start Off Screen and End Off Screen.
D. Create your text. Right-click the text box and choose Transform > Roll/Crawl Options and check Start Off Screen and End Off Screen.
Correct Answer: C
QUESTION 30
You want to add a new video clip to your timeline between two existing video clips. You do NOT want to lose any existing footage. Which editing technique should you use?
A. rolling edit
B. insert edit
C. overlay edit
D. razor edit
Correct Answer: B
QUESTION 31
Which task can be accomplished from the Audio Mixer window?
A. adding a split edit between two audio clips
B. adding an audio effect
C. adding a clip from a bin
D. adding a cross-fade to two audio clips
Correct Answer: B
QUESTION 32
You want to add an additional keyframe directly to a clip on the timeline. You select the clip and set it to Show Keyframes for the filter you want to add a keyframe to. Which tool should you use to add a new keyframe to the clip?
A. Ctrl+left click the clip with the Pen tool
B. Ctrl+left click the clip with the Selection tool
C. left click the clip with the Selection tool
D. left click the clip with the Pen tool
Correct Answer: A
QUESTION 33
Which options in the Export Movies dialog box will allow you to open and edit the original project from within another Adobe Premiere Pro project or from another application that supports the command.?
A. File Type set to Animated GIF and Embedding Options set to None
B. File Type set to Targa and Embedding Options set to Project
C. File Type set to QuickTime and Embedding Options set to None
D. File Type set to Microsoft AVI and Embedding Options set to Project
Correct Answer: D
QUESTION 34
Which portion of the timeline is represented in the Effect Controls window?
A. The duration of the timeline
B. The duration of the selected clip on the timeline
C. The duration of the active sequence on the timeline
D. The duration of the work area set on the timeline
Correct Answer: B
QUESTION 35
You want to import an Adobe Photoshop image that contains blending modes while preserving the appearance of the image. What should you do?
A. Import the Photoshop image as a single file, and choose the top layer in the Layer Options of the Import Layered File dialog box.
B. Import the Photoshop image as a single file, and select Merged Layers in the Layer Options section of the Import Layered File dialog box.
C. Import the Photoshop image as a sequence.
D. Import the Photoshop image as a series of stills.
Correct Answer: B
QUESTION 36
You want to insert a clip into a sequence without altering the soundtrack. Which method results in an insert edit that shifts subsequent clips only in the tracks to which you add the clip?
A. Alt-drag to a track in the Timeline.
B. Ctrl-drag to a track in the Timeline.
C. Ctrl+Alt-drag to a track in the Timeline.
D. Ctrl+Shift-drag to a track in the Timeline.
Correct Answer: C QUESTION 37
Which equipment does Adobe Premiere Pro support natively and is necessary for device control of an external digital video device?
A. a source videotape without timecode
B. a IEEE 1394 cable that connects the device to the computer
C. a serial port connection on your computer
D. a software driver for Windows Media Player or Apple Quicktime
Correct Answer: B QUESTION 38
You want to import CD audio into your project. What should you do?
A. Import the CDA file into your project and choose Clip > Audio > Conform to Project Settings.
B. Choose File > Capture > CD Audio, and select Current Project Settings in the Conform Audio dialog box.
C. Use a third party application to first convert the CD Audio to a supported format, and then import the audio clip
D. Choose File > Capture and select CD Audio Device from the Device Control pop up menu.
Correct Answer: C QUESTION 39
You are editing the middle of three adjacent clips. You want to shift the In and Out points of the clip forward or backward by the same number of frames by using a single action.
You do NOT want to change the duration of the clip or affect the adjacent clips. Which tool should you use?
A. Slip Edit
B. Rolling Edit
C. Slide Edit
D. Ripple Edit
Correct Answer: A QUESTION 40
Which statement about locking a video track in the timeline is true?
A. The locked track becomes the target track.
B. The associated audio track is also locked.
C. The locked track is not exported.
D. The locked track is not shifted when performing insert edits.
Correct Answer: D QUESTION 41
Which set of options in the Transcode Settings dialog box of the Adobe Media Encoder will allow you to store information about the media?
A. Audience
B. Metadata
C. Multiplexer
D. Bitrate Encoding
Correct Answer: B
QUESTION 42
You want a title to fade in over a clip. What should you do?
A. select the title in the timeline, then set opacity keyframes in the Effects Control window
B. select the clip in the timeline, then set opacity keyframes in the Effects Control window
C. select the clip in the timeline, then set opacity keyframes in the Effects window
D. select the title in the timeline, then set opacity keyframes in the Effects window
Correct Answer: A
QUESTION 43
You want to resize the Work Area Bar over a contiguous range of clips. What should you do?
A. Alt-double click the Work Area Bar.
B. Double-click the Work Area Bar.
C. Context-click the Work Area Bar and select the appropriate option in the context menu.
D. Ctrl-click the Work Area Bar.
Correct Answer: A
QUESTION 44
Which automation mode in the Audio Mixer window should you use if you want automation to start only when you begin to adjust a value, and the value to remain where it is when you stop adjusting it.
A. Touch
B. Read
C. Latch
D. Write
Correct Answer: C
QUESTION 45
Which roll/crawl option specifies the number of frames that will play before the title begins?
A. Pre-Roll
B. Post-Roll
C. Ease-Out
D. Ease-In
Correct Answer: A
QUESTION 46
Which three attributes can be adjusted when you use the Fixed Effects area of the Effects Control palette? (Choose three)
A. Scale
B. Anchor Point
C. Tilt
D. Transform
E. Swivel
F. Rotation
Correct Answer: ABF QUESTION 47
When is digital audio conformed to the project settings?
A. when the audio is edited in Premiere Pro
B. when the project is exported to its final format
C. when the project is completely previewed in Premiere Pro
D. when the audio is imported
Correct Answer: D QUESTION 48
You want to know where in your video frame you can display a title that will NOT be cut off when viewed on a video monitor. Which setting in the Monitor window should you use?
A. Set In and Out Points
B. Output
C. Set Unnumbered Marker
D. Safe Margins
Correct Answer: D QUESTION 49
You are looking at a timeline and CANNOT see the first frame of each video clip. You want to view the thumbnails of the video clips. What should you do?
A. expand the video track by clicking the triangle to the left of a track’s name
B. right-click the clips in the video track and select Frame Hold from the pop-up menu
C. right-click the clips in the video track and select Enable from the pop-up menu
D. click the Eye icon to the left of the video track
Correct Answer: A QUESTION 50
Which set of options in the Transcode Settings dialog box of the Adobe Media Encoder will allow you to store information about the media?
A. Multiplexer
B. Bitrate Encoding
C. Audience
D. Metadata
Correct Answer: D QUESTION 51
What happens if you position the cursor over the edit point of the transition graphic as shown in the exibit, and then drag the cursor left or right?
A. Change the transition duration
B. A ripple edit
C. Change the transition position
D. A rolling edit
Correct Answer: D QUESTION 52
You want to export only the audio from a sequence in the Timeline window that contains both video and audio. What should you do?
A. right-click each video clip in the timeline, deselect Reveal in Project, and then export
B. turn off the Show Frames selection in the Set Display Style area of the timeline, and then export
C. click the eye icon to the left of any video clip in the timeline to remove it, and then export
D. set the properties in each video clip in the timeline to the appropriate setting, and then export
Correct Answer: C QUESTION 53
Where does a saved static title created in the Adobe Title Designer automatically appear?
A. at the current time in the Timeline
B. at the end of the currently selected clip in the Timeline
C. in the active bin in the Project window
D. in a separate file that needs to be imported to the current project
Correct Answer: C QUESTION 54
Your timeline is set to display keyframes. You want to set a new keyframe for a property in the timeline. What should you do?
A. Position the Selection tool over the keyframe graph line where you want to add the keyframe, and then Control-click.
B. Position the Pen tool over the keyframe graph line where you want to add the keyframe, and then Control-click.
C. Position the Selection tool over the keyframe graph line where you want to add the keyframe, and then click.
D. Position the Pen tool over the keyframe graph line where you want to add the keyframe, and then click.
Correct Answer: B QUESTION 55
What is the purpose of the Unlink Media command in the Project menu?
A. To take a single footage clip with audio and video and create two separate clips, one for audio and one for video.
B. To recapture the selected footage clip at the resolution of the project.
C. To convert the selected online file to an offline file.
D. To remove any unused files in the Project Window.
Correct Answer: C QUESTION 56
Which setting in the Audio Mixer window should you choose if you want to alter automation settings for some properties while leaving other properties unchanged?
A. Pre-Fader
B. Switch to Touch After Write
C. Safe During Write
D. Show/Hide Tracks
Correct Answer: C QUESTION 57
Which options in the Export Movies dialog box will allow you to open and edit the original project from within another Adobe Premiere Pro project or from another application that supports the command.?
A. File Type set to QuickTime and Embedding Options set to None
B. File Type set to Animated GIF and Embedding Options set to None
C. File Type set to Targa and Embedding Options set to Project
D. File Type set to Microsoft AVI and Embedding Options set to Project
Correct Answer: D QUESTION 58
You are editing the middle of three adjacent clips. You want to shift the In and Out points of the clip forward or backward by the same number of frames by using a single action.
You do NOT want to change the duration of the clip or affect the adjacent clips. Which tool should you use?
A. Rolling Edit
B. Ripple Edit
C. Slide Edit
D. Slip Edit
Correct Answer: D QUESTION 59
You have copied a set of keyframes in the Effects Controls window. Where will the copied keyframes
initially appear when you paste them in a second clip?
A. In the corresponding property in the destination clip’s effect. The earliest keyframe appears at the current time, and the other keyframes follow in relative order.
B. In the corresponding property in the destination clip’s effect. The earliest keyframe appears at the beginning of the clip, and the other keyframes follow in relative order.
C. In the selected properties in the destination clip’s effect. The earliest keyframe appears at the current time, and the other keyframes follow in relative order
D. In the selected properties in the destination clip’s effect. The earliest keyframe appears at the beginning of the clip, and the other keyframes follow in relative order.
Correct Answer: A
QUESTION 60
When is the Apply Video Transition option in the Squence menu be available?
A. Anytime a clip is selected
B. Anytime the the current-time indicator is on the edit point between two clips on your target track
C. Anytime the Video Transitions Bin is selected
D. Anytime there is a clip on the timeline
Correct Answer: B
QUESTION 61
Which edit is created by default when you drag a clip from a bin into the Timeline?
A. overlay edit
B. insert edit
C. razor edit
D. rolling edit
Correct Answer: A
QUESTION 62
You want to add an additional keyframe directly to a clip on the timeline. You select the clip and set it to Show Keyframes for the filter you want to add a keyframe to. Which tool should you use to add a new keyframe to the clip?
A. left click the clip with the Selection tool
B. left click the clip with the Pen tool
C. Ctrl+left click the clip with the Selection tool
D. Ctrl+left click the clip with the Pen tool
Correct Answer: D
QUESTION 63
Which statement about a static title created in the Adobe Title Designer is true?
A. If you are creating a static title in content for the Web or for a CD, the safe title and safe action zones do not apply since you can see the entire video.
B. The title is saved with a .ppj file extension.
C. You must apply transparency to a title before bringing it into the timeline.
D. Logos added to a static title cannot be resized.
Correct Answer: A
QUESTION 64
Your sequence has three clips. You want to move edit point 2 WITHOUT affecting any other edit points.
Which tool should you use?
A. Slide
B. Rolling Edit
C. Razor Edit
D. Slip
Correct Answer: B
QUESTION 65
Which button in the Project window allows you to override the default thumbnail that is displayed?
A. Icon
B. Automate to Sequence
C. Play
D. Poster Frame
Correct Answer: D
Whenever Cisco candidates take a tour of sample questions of Adobe 9A0-040 exam they find their training to be matchless to great extent.Passing the Adobe 9A0-040 on your own can be a difficult task,but with Adobe 9A0-040 preparation products, many candidates who appeared online passed Adobe 9A0-040 easily.