Flydumps just published the newest Adobe 9A0-040 dumps with all the new updated exam questions and answers. Flydumps provide the latest version of Adobe 9A0-040 and VCE files with up-to-date questions and answers to ensure your exam 100% pass, on our website you will get the free new newest Adobe 9A0-040 version VCE Player along with your VCE dumps.
QUESTION 62
You are editing a video that will be viewed over the Internet through a Web browser. Which setting should you choose from the General submenu of the Project Settings dialog box?
A. 30 fps Timecode
B. 50 fps Timecode
C. 25 fps Timecode.
D. 29.97 fps Drop-Frame Timecode
Correct Answer: A QUESTION 63
A timebase setting of 24 has been set in the General submenu of the Project settings dialog box. Which type of footage is typically edited using that setting?
A. PAL format video
B. motion picture film
C. NTSC format video
D. SECAM format video
Correct Answer: B QUESTION 64
Which setting in the Audio Mixer window should you choose if you want to alter automation settings for some properties while leaving other properties unchanged?
A. Pre-Fader
B. Safe During Write
C. Show/Hide Tracks
D. Switch to Touch After Write
Correct Answer: B
QUESTION 65
Which audio processing step occurs first when you import a project?
A. Premiere Pro applies effects to clips.
B. Premiere Pro processes track settings such as prefade effects, prefade sends, mute, etc.
C. Premiere Pro conforms its audio to the audio settings specified in the New Project dialog box.
D. Premiere Pro applies gain adjustments applied to clips by using the command Clip > Audio Options > Audio Gain.
Correct Answer: C
QUESTION 66
Which automation mode in the Audio Mixer window should you use if you want automation to start only when you begin to adjust a value, and the value to remain where it is when you stop adjusting it.
A. Read
B. Write
C. Latch
D. Touch
Correct Answer: C
QUESTION 67
What is the default crossfade between two audio tracks when you choose Sequence > Add Audio Transition?
A. Invert
B. Highpass
C. Constant Gain
D. Constant Power
Correct Answer: D
QUESTION 68
How do you increase the volume of a clip?
A. boost the gain on your audio card
B. re-conform the audio and re-place the clip in the timeline
C. select Meter Inputs Only from the Audio Mixer palette menu
D. select a clip and then choose Clip > Audio Options > Audio Gain
Correct Answer: D
QUESTION 69
You want to import an Adobe Photoshop image that contains blending modes while preserving the appearance of the image. What should you do?
A. Import the Photoshop image as a sequence.
B. Import the Photoshop image as a series of stills.
C. Import the Photoshop image as a single file, and choose the top layer in the Layer Options of the Import Layered File dialog box.
D. Import the Photoshop image as a single file, and select Merged Layers in the Layer Options section of the Import Layered File dialog box.
Correct Answer: D QUESTION 70
Which three options allow you to capture analog video directly into your project? (Choose three.)
A. Transfer your analog video via a Universal Serial Bus (USB)
B. Use an analog capture card that is certified with Premiere Pro.
C. Use a DV camcorder that supports IEEE 1394 output directly from analog input, and then capture using DV.
D. Use a DV camcorder with an analog video input, dub the analog tape to DV format tape, and then capture from the DV copy.
E. Connect your analog camcorder to the RCA or S-Video input of Adobe Premiere, and select the DV Input from the Device Control menu of the Capture screen.
Correct Answer: BCD QUESTION 71
You want to import CD audio into your project. What should you do?
A. Choose File > Capture and select CD Audio Device from the Device Control pop up menu.
B. Import the CDA file into your project and choose Clip > Audio > Conform to Project Settings.
C. Choose File > Capture > CD Audio, and select Current Project Settings in the Conform Audio dialog box.
D. Use a third party application to first convert the CD Audio to a supported format, and then import the audio clip
Correct Answer: D QUESTION 72
Which equipment does Adobe Premiere Pro support natively and is necessary for device control of an external digital video device?
A. a source videotape without timecode
B. a serial port connection on your computer
C. a IEEE 1394 cable that connects the device to the computer
D. a software driver for Windows Media Player or Apple Quicktime
Correct Answer: C QUESTION 73
Which action can be performed while using the Capture window and playing back a tape for viewing or capture?
A. Changing the scratch disk.
B. Logging clips to a batch list.
C. Entering information about the next clip.
D. Changing the folder where clips are logged.
Correct Answer: C QUESTION 74
Which is a valid use for a reference monitor?
A. Viewing multiple source clips at once.
B. Ganging the Source and Program views together.
C. Arranging the windows to simulate older versions of Premiere.
D. Viewing the sequence in a secondary monitor, usually for the purpose of color correction or color matching.
Correct Answer: D QUESTION 75
You want to add a new video clip to your timeline between two existing video clips. You do NOT want to lose any existing footage. Which editing technique should you use?
A. razor edit
B. insert edit
C. rolling edit
D. overlay edit
Correct Answer: B QUESTION 76
You want to adjust the edit point between two clips in your timeline. You do NOT want to adjust the total length of the sequence. Which editing tool or button should you use?
A. Extract button
B. Ripple Edit tool
C. Rolling Edit tool
D. Insert Edit button
Correct Answer: C QUESTION 77
What happens when you attempt to drag an audio clip (including audio linked to video) to an audio track of a different channel type?
A. Premiere Pro automatically generates or removes audio channels in the clip to match the audio track’s channel type.
B. A dialog box box appears, prompting you to resolve the problem by choosing another target track, or creating a compatible target track.
C. The clip is added to the track; however, Premiere Pro ignores or distributes audio channels in the clip according to the audio track’s channel type.
D. The audio clip (or audio component of a linked clip) automatically shifts to the next compatible audio track; if no such track exists, then an audio track of the appropriate channel type is created automatically.
Correct Answer: D
QUESTION 78
You want to resize the Work Area Bar over a contiguous range of clips. What should you do?
A. Ctrl-click the Work Area Bar.
B. Double-click the Work Area Bar.
C. Alt-double click the Work Area Bar.
D. Context-click the Work Area Bar and select the appropriate option in the context menu.
Correct Answer: C QUESTION 79
Click the Exhibit button.
You want to insert Clip D (not shown) from the Project window into Video Track 2 at edit point 1. Which three steps should you choose? (Choose three.)
A. Right-click Clip D in the Project Window and choose Insert.
B. Place Clip D in the Source Window and click the Insert button.
C. Drag Clip D to the Project window to Edit Point 1 while holding the Alt key
D. Drag Clip D from the Project Window to Edit Point 1 while holding the Control key.
E. Select Clip D in the Project Window and choose nsert Clip at Zero Point?from the Project Window Options menu.
Correct Answer: ABD QUESTION 80
You want to export only the audio from a sequence in the Timeline window that contains both video and audio. What should you do?
A. right-click each video clip in the timeline, deselect Reveal in Project, and then export
B. click the eye icon to the left of any video clip in the timeline to remove it, and then export
C. set the properties in each video clip in the timeline to the appropriate setting, and then export
D. turn off the Show Frames selection in the Set Display Style area of the timeline, and then export
Correct Answer: B QUESTION 81
Under which circumstance should you choose Audio Units in the Source view menu?
A. To create a 1kHz tone for use in a video leader.
B. To display each track of a stereo clip separately.
C. To make an audio waveform appear in the Source view.
D. To set the Source view’s time ruler to audio samples, so you can set sample-based In and Out points.
Correct Answer: D QUESTION 82
Click the Exhibit button.
Your sequence has three clips. You want to move edit point 2 WITHOUT affecting any other edit points.
Which tool should you use?
A. Slip
B. Slide
C. Razor Edit
D. Rolling Edit
Correct Answer: D QUESTION 83
You want to evaluate the luminance levels of certain clips in a sequence. Which viewing mode would you use?
A. Alpha
B. Composite
C. Vectorscope
D. Waveform Monitor
Correct Answer: D QUESTION 84
You are looking at a timeline and CANNOT see the first frame of each video clip. You want to view the thumbnails of the video clips. What should you do?
A. click the Eye icon to the left of the video track
B. expand the video track by clicking the triangle to the left of a track’s name
C. right-click the clips in the video track and select Enable from the pop-up menu
D. right-click the clips in the video track and select Frame Hold from the pop-up menu
Correct Answer: B QUESTION 85
You are editing the middle of three adjacent clips. You want to shift the In and Out points of the clip forward or backward by the same number of frames by using a single action.
You do NOT want to change the duration of the clip or affect the adjacent clips. Which tool should you use?
A. Slip Edit
B. Slide Edit
C. Ripple Edit
D. Rolling Edit Correct Answer: A QUESTION 86
In which three situations should you choose the Automate to Sequence command in the Project window? (Choose three.)
A. To place clips on the timeline with your default effects and transitions applied
B. To automatically place transitions between clips that are already on the timeline
C. To automatically place the selected clips into the timeline at unnumbered markers.
D. To quickly assemble a rough cut in the timeline based on the sort order of the project bin.
E. To automatically place the selected clips into the gaps between clips already on the timeline.
F. To automatically place the selected clips into the timeline using the default transition between clips.
Correct Answer: CDF
QUESTION 87
A still image has a duration of 2 seconds in a project that is set to 30 frames per second. Which procedure will create a 2-second clip instead of 60 frames at 1/30 of a second each?
A. Select Optimize Stills in the Video Rendering submenu of the Project Settings dialog box.
B. Select Millions of Colors from the Color Depth menu in the Video Rendering submenu of the Project Settings dialog box.
C. Select an appropriate codec from the Compressor menu in the Video Rendering submenu of the Project Settings dialog box.
D. Select Scale Clips to Project Dimensions when Adding to Sequence from the General menu of the Project Settings dialog box.
Correct Answer: A
QUESTION 88
Which setting in the General submenu of the Project Settings dialog box determines which video method is used to play back sequences and which compression methods appear in the Video Settings panel.
A. Timebase
B. Display Format
C. Editing Mode
D. Pixel Aspect Ratio
Correct Answer: C
QUESTION 89
You are working on your sequence and realize that you chose the wrong preset when you started the project. The audio sample rate of your project is 32kHz, but the sample rate of your source media audio is 48kHz. You do NOT want to downsample your audio. What should you do?
A. Continue working, but make sure to export the project at 48kHz.
B. Nest the sequence in a new sequence that uses the proper sample rate.
C. change the audio sample rate to 48kHz in the General panel of the Project Settings dialog box,
D. Start a new project with the 48kHz setting and import the sequence you were working on into that project.
Correct Answer: D
QUESTION 90
What is the purpose of the Unlink Media command in the Project menu?
A. To convert the selected online file to an offline file.
B. To remove any unused files in the Project Window.
C. To recapture the selected footage clip at the resolution of the project.
D. To take a single footage clip with audio and video and create two separate clips, one for audio and one
for video. Correct Answer: A QUESTION 91
Click the Exhibit button.
Which tool or command was used to create the highlighted file?
A. Adobe Title Designer
B. File > Export > Movie
C. Universal Counting Leader
D. Sequence > Render Work Area
Correct Answer: A
QUESTION 92
The capture format options are NOT appearing in the Capture submenu of the Project Settings dialog box. Which setting has been selected from the Capture Format drop down menu ?
A. MPEG-2
B. QuickTime
C. Video for Windows
D. DV/IEEE 1394 Capture
Correct Answer: D
QUESTION 93
For which task should you choose Project > Unlink Media?
A. log clips from a tape
B. make an online clip offline in order to recapture it
C. reset project settings without having to recapture video
D. break links between Adobe Photoshop and Illustrator files and Premiere Pro
Correct Answer: B
QUESTION 94
When is the Apply Video Transition option in the Squence menu be available?
A. Anytime a clip is selected
B. Anytime there is a clip on the timeline
C. Anytime the Video Transitions Bin is selected
D. Anytime the the current-time indicator is on the edit point between two clips on your target track
Correct Answer: D
QUESTION 95
Which menu allows you to set the default transition?
A. The Preferences menu
B. The Effects window menu
C. The Effects Control window menu
D. The right click menu on the transition
Correct Answer: B
QUESTION 96
You want a title to fade in over a clip. What should you do?
A. select the clip in the timeline, then set opacity keyframes in the Effects window
B. select the title in the timeline, then set opacity keyframes in the Effects window
C. select the clip in the timeline, then set opacity keyframes in the Effects Control window
D. select the title in the timeline, then set opacity keyframes in the Effects Control window
Correct Answer: D
QUESTION 97
Which three attributes can be adjusted when you use the Fixed Effects area of the Effects Control palette? (Choose three)
A. Tilt
B. Scale
C. Swivel
D. Rotation
E. Transform
F. Anchor Point
Correct Answer: BDF
QUESTION 98
Which three transition settings can be made directly in the Effects Control window? (Choose three)
A. Change the transition type
B. Change the default transition
C. Change the transition position
D. Change the duration of the transition
E. Change the in/out points of the A or B clip
Correct Answer: CDE
QUESTION 99
You want to copy a single effect from clip A to clip B. You do NOT want to copy all effects from clip A. What should you do?
A. select Clip A and choose Edit > Copy; then,select Clip B and choose Edit > Paste
B. select Clip A and choose Edit > Copy; then,select Clip B and choose Edit > Paste Attributes
C. Right click on clip A and choose Copy; then, right click on clip B and choose Paste Attributes
D. select Clip A, select the effect in the Effect Controls window and choose Edit > Copy; then, select Clip B and choose Edit > Paste in the Effect Controls window
Correct Answer: D
QUESTION 100
You have copied a set of keyframes in the Effects Controls window. Where will the copied keyframes initially appear when you paste them in a second clip?
A. In the selected properties in the destination clip’s effect. The earliest keyframe appears at the current time, and the other keyframes follow in relative order
B. In the corresponding property in the destination clip’s effect. The earliest keyframe appears at the current time, and the other keyframes follow in relative order.
C. In the selected properties in the destination clip’s effect. The earliest keyframe appears at the beginning of the clip, and the other keyframes follow in relative order.
D. In the corresponding property in the destination clip’s effect. The earliest keyframe appears at the beginning of the clip, and the other keyframes follow in relative order.
Correct Answer: B
QUESTION 101
Which portion of the timeline is represented in the Effect Controls window?
A. The duration of the timeline
B. The duration of the selected clip on the timeline
C. The duration of the work area set on the timeline
D. The duration of the active sequence on the timeline
Correct Answer: B
QUESTION 102
Click the Exhibit button.
What happens if you position the cursor over the edit point of the transition graphic as shown in the exibit, and then drag the cursor left or right?
A. A ripple edit
B. A rolling edit
C. Change the transition position
D. Change the transition duration
Correct Answer: B
QUESTION 103
You want to slow down the speed of a credit roll you have created as a rolling title in the Adobe Title Designer. What should you do?
A. decrease the length of the title in the timeline
B. increase the length of the title clip in the timeline
C. decrease the Speed value in the Object Style area of the Title Designer
D. increase the Y value of the title in the Transform area of the Title Designer
Correct Answer: B
QUESTION 104
What is the purpose of the Sync to Timeline Timecode button in the Adobe Title Designer?
A. to lock the title to the timecode at the timeline marker.
B. to insert the title in Target Track at the timeline marker.
C. to preview the title over the video at the timeline marker.
D. to toggle the display of the timeline timecode as a text object
Correct Answer: C
QUESTION 105
You are working in the Adobe Title Designer. You want your title to begin off screen, roll from the bottom to the top, and finish off screen. What should you do?
A. Create your text. Choose Title > Roll/Crawl Options and check Roll From Bottom to Top.
B. Create your text. Right-click the text box and choose Roll From Bottom to Top, and check Start Off Screen and End Off Screen.
C. Create your text. Right-click the text box and choose Transform > Roll/Crawl Options and check Start Off Screen and End Off Screen.
D. Select Roll from the Title Type pop up menu. Create your text. Choose Title > Roll/Crawl Options and check Start Off Screen and End Off Screen.
Correct Answer: D QUESTION 106
Which statement about a static title created in the Adobe Title Designer is true?
A. The title is saved with a .ppj file extension.
B. Logos added to a static title cannot be resized.
C. You must apply transparency to a title before bringing it into the timeline.
D. If you are creating a static title in content for the Web or for a CD, the safe title and safe action zones do not apply since you can see the entire video.
Correct Answer: D QUESTION 107
You want to ensure that a title will be completely visible on a television set. Which command should you choose?
A. Title > View > Safe Title Margin
B. Title > View > Safe Action Margin
C. Project > Project Settings > General > Title Safe Area
D. Project > Project Settings > General > Action Safe Area
Correct Answer: A QUESTION 108
You have created a shape in the Adobe Title Designer. You want to maintain the aspect ratio of the shape while dragging the boundries of the shape. Which modifer key should you use?
A. Shift key
B. Control key
C. Alt key
D. Control / Alt key combination
Correct Answer: A QUESTION 109
You want to create a smooth, semi circle text path. What should you do?.
A. Select the Ellipse tool, draw your ellipse; then, select the Type Tool to type along the ellipse.
B. Select the Pen Tool, draw your path; then, drag the anchor point handles to smooth your path.
C. Select the Pen Tool, draw your path; then, right-click the path and choose Smooth Anchor Points.
D. Select the Path Type Tool, draw your path; then, drag the anchor point handles to smooth your path.
Correct Answer: D QUESTION 110
You want to add an additional keyframe directly to a clip on the timeline.
You select the clip and set it to Show Keyframes for the filter you want to add a keyframe to. Which tool should you use to add a new keyframe to the clip?
A. left click the clip with the Pen tool
B. left click the clip with the Selection tool
C. Ctrl+left click the clip with the Pen tool
D. Ctrl+left click the clip with the Selection tool
Correct Answer: C
Flydumps.com practice test training resources are versatile and highly compatible with Adobe exam formats. We provide up to date resources and comprehensive coverage on Adobe 9A0-040 exam dumps help you to advance your skills.