In this article, we’ll look at the key points of passing the NetApp NS0-175 exam. Great tips for NetApp NS0-175 exams: Make sure you’re well prepared for success with a real NetApp NS0-175 study guide and practice NS0-175 exam answers.
Click on the link to the latest NetApp NS0-175 study guide https://www.pass4itsure.com/ns0-175.html where you’ll find all the important NS0-175 practice questions and some amazing tips for passing the exam.
Download latest & valid questions for NS0-175 study guide pdf
Important NetApp NS0-175 practice questions free share
QUESTION 1
What are the three requirements for all FlexPod Datacenter solutions? (Choose three.)
A. two NetApp storage controllers in a high-availability (HA) pair configuration B. a separate 100 Mbps Ethernet/1 Gbps Ethernet out-of-band management network C. a pair of Fabric Extenders in a redundant configuration D. two Cisco UCS 6200, 6300, or 6400 Series Fabric Interconnects in a redundant configuration E. redundant boot-from-SAN LUN paths
Correct Answer: CDE
QUESTION 2
Your environment currently has a 12-node NetApp cluster serving iSCSI. You need to add at least four more nodes to serve FC to your environment. In this scenario, what should you do?
A. You can safely add up to 4 more storage controllers in the current cluster B. You can safely add up to 6 more storage controllers in the current cluster C. You must create a new cluster with the new storage controllers D. You can safely add up to 12 more storage controllers in the current cluster
Correct Answer: A
QUESTION 3
You want to ensure the uniqueness of the Cisco UCS WWNNs and WWPNs in the SAN for a FlexPod solution. In this the situation, Cisco recommends using which WWN prefix for all blocks in a pool?
A. 30:00:00:25:B5:XX:XX:XX B. 40:00:00:25:B5:XX:XX:XX C. 20:00:00:25:B5:XX:XX:XX D. 60:00:00:25:B5:XX:XX:XX
A customer wants to use a Cisco Nexus 93180YC-FX switch to support the FC protocol for booting from SAN without having to deploy additional Cisco 900 Series MDS switches in their FlexPod Datacenter configuration. In this scenario, what is required for this solution?
A. The customer must enable the FC license on the 93180YC-FX switch B. The customer must deploy the 93180YC-FX switch as part of a Cisco ACI fabric C. The customer must directly connect the NetApp AFF system to the Cisco UCS Fabric Interconnects D. The customer must add an expansion FC module to the 93180YC-FX switch
A customer is verifying that they have separation on their FC switch fabric to protect their FlexPod solution from their other storage devices. Which two technologies enable the customer to accomplish this task? (Choose two.)
A. WWPN zoning B. VASN C. IQN igroup D. VLAN
Correct Answer: AD
QUESTION 6
A customer with a FlexPod solution wants to expand their NetApp ONTAP 9.7 switchless cluster. The new hardware must support expansion slots. In addition, they will also upgrade to a 100 Gbps-capable cluster interconnect switch for future growth.
In this scenario, which two additional components will satisfy the requirement? (Choose two.)
A. Nexus 3232C B. Nexus N3132Q-V C. NetApp FAS2720 D. NetApp AFF A400
During a design meeting, a customer states that their goal is to deliver continuous availability across both network and storage during business continuity events. The customer has two data centers that are 80 km apart, and they want the configuration to be as logically unified across both sites as possible.
In this scenario, which FlexPod data protection solution achieves this goal?
A. FlexPod with NetApp Cloud Sync B. FlexPod with NetApp SnapCenter C. FlexPod with NetApp MetroCluster IP D. FlexPod with NetApp FabricPool
Correct Answer: C
QUESTION 8
A customer is performing a server refresh of their FlexPod solution to accommodate business growth. The customer is interested in using Cisco C-Series servers, and supporting multiple 40 Gbps links to each server, upgrading from the existing 10 Gbps links.
Which two VICs support these requirements? (Choose two.)
A. Cisco UCS 1480 VIC B. Cisco UCS 1497 VIC C. Cisco UCS 1495 VIC D. Cisco UCS 1440 VIC
You have taken over the management of an existing FlexPod system as part of a new job role. You want to find details of existing support and service contracts available for the system. Which two resources would you use to find this information? (Choose two.)
A. NetApp Interoperability Matrix Tool B. Cisco Device Coverage Checker Tool C. NetApp Support website D. FlexPod.com website
Correct Answer: AC
QUESTION 10
A customer wants to replace their Cisco UCS 6248UP with the current Cisco UCS 6454. They are currently using six 16 Gbit uplinks per Fabric Interconnect for FC and do not want to change the speed and number of ports used. In this scenario, what is the minimum number of unified ports that must be configured for FC for a comparable configuration?
A customer has decided to deploy Red Hat OpenShift on a FlexPod solution, based on a published Cisco Validated Design. The customer intends to use the NetApp Trident to attach persistent storage to the customer\\’s containers from the customer\\’s NetApp AFF controllers.
In this scenario, which two storage protocols are supported? (Choose two.)
A. iSCSI B. FC C. NFS D. SMB
Correct Answer: BC
QUESTION 12
Which two support account levels are minimally required when you deploy a FlexPod Datacenter solution? (Choose two.)
A. NetApp SupportEdge Expert NBD B. Cisco SmartNet Total Care 24x7x4 C. NetApp SupportEdge Advisor 24x7x4 D. Cisco Solution Support 24x7x4
Correct Answer: CD
QUESTION 13
You are asked to evaluate SaaS-based monitoring solutions for your FlexPod environment. Other than being SaaSdelivered, selection criteria include full lifecycle management, environment automation, and the ability to monitor third-party storage that is slated for retirement.
In this scenario, which product satisfies the requirements?
A. NetApp Cloud Insights B. NetApp OnCommand Insight C. Cisco UCS Manager D. Cisco Intersight
Back to the topic at hand, passing the NetApp NS0-175 certification exam is necessary to obtain a reliable NS0-175 study guide.
Enter in Google https://www.pass4itsure.com/ns0-175.html you’ll get what you’re happy with. Don’t forget, it’s also important to practice the NetApp NS0-175 practice test hard. Start your preparation journey, come on.
Given the fact that the Fortinet NSE5_FMG-6.2 exam is not easy, it cannot be taken lightly to pass. There are some things you can do to achieve certification quickly and easily. One of the obstacles to passing Fortinet NSE5_FMG-6.2 is finding the right exam NSE5_FMG-6.2 dumps pdf questions. You must be extra careful when choosing NSE5_FMG-6.2 dumps pdf questions and answers. Although there are many resources available online, not all are reliable.
To make this task easy, I recommend that you purchase NSE5_FMG-6.2 dumps pdf questions. These questions are accurate. >>> https://www.pass4itsure.com/nse5_fmg-6-2.html ( nse5 fmg-6.2 dumps PDF +nse5 fmg-6.2 dumps VCE)
Practice with all your might, NSE5_FMG-6.2 practice test
QUESTION 1
An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators.
How should the Workspace mode be configured on FortiManager?
A. Set to workflow and use the ADOM locking feature B. set to read/write and use the policy locking feature C. Set to normal and use the policy locking feature D. Set to disable and use the policy locking feature
Correct Answer: A
QUESTION 2
What are the factory default settings on FortiManager? (Choose three.)
A. Username is admin B. Password is fortinet C. FortiAnalyzer features are disabled D. Reports and Event Monitor panes are enabled E. port1 interface IP address is 192.168.1.99/24
Correct Answer: ACE
QUESTION 3
What configuration setting for FortiGate is part of a device-level database on FortiManager?
A. VIP and IP Pools B. Firewall policies C. Security profiles D. Routing
Correct Answer: D
QUESTION 4
What does a policy package status of Modified indicate?
A. FortiManager is unable to determine the policy package status B. The policy package was never imported after a device was registered on FortiManager C. Policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager D. Policy package configuration has been changed on FortiManager and changes have not yet been installed on the managed device.
Correct Answer: D
QUESTION 5
View the following exhibit.
An administrator has created a firewall address object, Training, which is used in the Local-FortiGate policy package. When the install operation is performed, which IP Netmask will be installed on the Local-FortiGate, for the Training firewall address object?
A. 10.0.1.0/24 B. It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values C. 192.168.0.1/24 D. Local-FortiGate will automatically choose an IP Network based on its network interface settings.
Correct Answer: A
QUESTION 6
View the following exhibit.
When using the Install Config option to install configuration changes to managed FortiGate, which of the following statements are true? (Choose two.)
A. Once initiated, the install process cannot be canceled and changes will be installed on the managed device B. Will does not create new revisions in the revision history C. Installs device-level changes to FortiGate without launching the Install Wizard D. Provides the option to preview configuration changes prior to installing them
Correct Answer: AC
QUESTION 7
Refer to the following exhibit:
Which of the following statements are true based on this configuration? (Choose two.)
A. The same administrator can lock more than one ADOM at the same time B. Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out C. Unlocking an ADOM will submit configuration changes automatically to the approval administrator D. Unlocking an ADOM will install configuration automatically on managed devices
Correct Answer: AB
QUESTION 8
Which of the following conditions triggers FortiManager to create a new revision history? (Choose two.)
A. When configuration revision is reverted to previous revision in the revision history B. When FortiManager installs device-level changes to a managed device C. When FortiManager is auto-updated with configuration changes made directly on a managed device D. When changes to the device-level database are made on FortiManager
Correct Answer: BC
QUESTION 9
An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to the managed FortiGate.
In which database will the configuration be saved? A. Device-level database B. Revision history database C. ADOM-level database D. Configuration-level database
An administrator wants to delete an address object that is currently referenced in a firewall policy. Which one of the following statements is true?
A. FortiManager will not allow the administrator to delete a referenced address object B. FortiManager will disable the status of the referenced firewall policy C. FortiManager will replace the deleted address object with the none address object in the referenced firewall policy D. FortiManager will replace the deleted address object with all address object in the referenced firewall policy
Correct Answer: C
QUESTION 11
Refer to the exhibit.
You are using the Quick Install option to install configuration changes on the managed FortiGate. Which two statements correctly describe the result? (Choose two.)
A. It will not create a new revision in the revision history B. It installs device-level changes to FortiGate without launching the Install Wizard C. It cannot be canceled once initiated and changes will be installed on the managed device D. It provides the option to preview configuration changes prior to installing them
Correct Answer: BC
QUESTION 12
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1. Which statement about the global policy package assignment to the newly created policy package Fortinet is true?
A. When a new policy package is created, it automatically assigns the global policies to the new package. B. When a new policy package is created, you need to assign the global policy package from the global ADOM. C. When a new policy package is created, you need to reapply the global policy package to the ADOM. D. When a new policy package is created, you can select the option to assign the global policies to the new package.
Correct Answer: A
QUESTION 13
As a result of enabling FortiAnalyzer features on FortiManager, which of the following statements is true?
A. FortiManager will reboot B. FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager C. FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices D. FortiManager can be used only as a logging device.
Correct Answer: A
Newly published [Drive] Fortinet NSE5_FMG-6.2 exam dumps pdf
As I mentioned earlier in this article, there are a few steps you can take to achieve Fortinet NSE 5 – FortiManager 6.2 certification. The above measures and errors are mentioned. Read them carefully, and if you want to succeed, follow them and practice the NSE5_FMG-6.2 questions exam as hard as you can to make everything shine.
