Most accurate The Apple 9L0-610 Questions & Answers covers all the knowledge points of the real exam. We update our product frequently so our customer can always have the latest version of Apple 9L0-610.We provide our customers with the excellent 7×24 hours customer service.We have the most professional Apple 9L0-610 expert team to back up our grate quality products.If you still cannot make your decision on purchasing our product, please try our Apple 9L0-610 free pdf practice test for you to free download.Apple 9L0-610 is also an authenticated IT certifications site that offer all the new questions and answers timely.Visit the site Flydumps.com to get free Apple 9L0-610 VCE test engine and PDF.
QUESTION 49
You have created a storage pool with three LUNs, each on a separate Xserve RAID controller. Assume that each RAID controller has a bandwidth of 200 MB/s (half-duplex). What is the theoretical bandwidth (half-duplex) of this storage pool?
A. 66 MB/s
B. 200 MB/s
C. 300 MB/s
D. 600 MB/s
E. 900 MB/s
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 50
In Xsan, you can set up an affinity between a folder and a ____________.
A. volume
B. metadata controller
C. hard disk
D. storage pool
Correct Answer: D Section: (none)Explanation
Explanation/Reference:
QUESTION 51
You have taken your primary metadata controller down for maintenance, and your backup controller has taken over its role. After bringing your original controller back online, how do you cause it to resume its role as primary metadata controller for the SAN?
A. Just turn it on. It will automatically retake its position as primary controller.
B. Turn it on, and then use cvadmin to manually fail the volumes on the backup controller.
C. Turn it on, and then use Xsan Admin to manually reassign it as primary controller.
D. Turn it on, use Xsan Admin to reassign its failover priority to “high,” and then restart it.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 52
In a disk-to-disk-to-tape backup solution, the tape is intended to store ___________.
A. archives and files not needed immediately
B. data from folders with no affinity
C. data from Xsan volumes over 16TB in size
D. metadata and journal data
Correct Answer: A Section: (none)Explanation
Explanation/Reference:
QUESTION 53
Fibre Channel switched fabrics use ___-bit addresses.
A. 8
B. 16
C. 24
D. 32
Correct Answer: C Section: (none)Explanation
Explanation/Reference:
QUESTION 54
Press Exhibit to view the image. In the SAN topology shown in the exhibit, ________.
A. the metadata traffic is isolated from other Ethernet traffic
B. the SAN can support three concurrent streams of uncompressed 10-bit HD Video
C. one of the clients should be configured as a metadata controller to enable failover
D. the clients must be receiving DHCP services from the active controller
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 55
Press Exhibit to view the image. In the image shown in the exhibit, which tab would you click on to get a window that allows you to add LUNs to Storage Pools in Xsan Admin.
A. A
B. B
C. C
D. D
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 56
Which storage pool configuration will enhance the performance of the SAN?
A. Each volume contains one storage pool.
B. Each volume contains many storage pools.
C. Data is striped over many RAID controllers.
D. Data is striped over a single RAID controller.
Correct Answer: C Section: (none)Explanation
Explanation/Reference: QUESTION 57
In order to assign affinities within a volume using Xsan Admin, the volume must be ________.
A. mounted on the current metadata controller
B. dismounted from the current metadata controller
C. mounted on at least one client
D. dismounted from all clients
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 58
In which file is the metadata priority setting (High, Medium, Low) stored?
A. priority.plist
B. role.plist
C. mdc.plist
D. acfs.plist
Correct Answer: B Section: (none)Explanation
Explanation/Reference:
QUESTION 59
Which utility is used to gather information about the Apple Fibre Channel PCI-X card (when installed in a computer)?
A. Activity Monitor
B. Network Utility
C. NetInfo Manager
D. Fibre Channel Utility
Correct Answer: D Section: (none)Explanation
Explanation/Reference:
QUESTION 60
An HBA is _____________.
A. a type of connector used in Fibre Channel installations
B. a type of cable used in Fibre Channel fabrics
C. a command sent by the metadata controller to halt bus access by clients
D. an interface card that allows a computer to connect to a Fibre Channel network
Correct Answer: D Section: (none) Explanation Explanation/Reference:
QUESTION 61
A switching hub ____________.
A. creates a fabric
B. uses FC-AL protocol
C. uses F-Ports to connect to nodes
D. is a passive connection between nodes
Correct Answer: B Section: (none)Explanation
Explanation/Reference:
QUESTION 62
Which tool is used to create LUNs on an Xserve RAID?
A. Disk Utility
B. Xsan Admin
C. Server Admin
D. RAID Admin
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 63
In a fabric, FC-IDs are resolved to WWNs by ____________.
A. the SFP
B. the switch
C. the N_Ports
D. the metadata controller
Correct Answer: B Section: (none)Explanation
Explanation/Reference:
QUESTION 64
If you create multiple storage pools in a shared volume but do not configure them with affinities, what determines which pool data is written to?
A. allocation strategy
B. RAID level of the LUNs
C. port mapping
D. LUN mapping
Correct Answer: A Section: (none)
Explanation Explanation/Reference:
QUESTION 65
When setting up user quotas in Xsan, you should ensure that each user account _____________.
A. has a unique UID
B. resides on an Open Directory LDAP server
C. has disk quotas enabled in Workgroup Manager
D. is a member of the xsanadmin group
Correct Answer: A Section: (none)Explanation
Explanation/Reference:
QUESTION 66
Which is a possible problem in an Xsan installation that does not use Directory Services?
A. UID duplication might enable unauthorized access to files.
B. Users cannot set group permissions for files saved on Xsan volumes.
C. Xsan data throughput is slower without Directory Services.
D. Group membership cannot be assigned using Finder.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 67
In simple Fibre Channel installations, why is a hub preferable to a physically-cabled loop?
A. A hub allows more than one pair of devices to communicate at the same time.
B. A hub allows dynamic addressing of storage.
C. A hub can automatically bypass a broken port.
D. A hub turns a loop into a fabric.
Correct Answer: C Section: (none)Explanation
Explanation/Reference:
Apple 9L0-610 Questions & Answers with explanations is all what you surely want to have before taking Apple 9L0-610 exam.Cisco Apple 9L0-610 Interactive Testing Engine is ready to help you to get your Apple 9L0-610 by saving your time by preparing you quickly for the Cisco exam. If you are worried about getting your Apple 9L0-610 certification passed and are in search of some best and useful material,Apple 9L0-610 Q&A will surely serve you to enhance your Interconnecting Cisco Networking Devices study.
100% Pass Guarantee You can download free Cisco 642-359 exam dumps with all new added questions and answers from Flydumps.com.With our Cisco 642-359 exam questions and answers in hand,a lot candidates pass the Cisco 642-359 exam at their first time. We make our promise that Flydumps is your best choice.
QUESTION 72
The Call Home feature provides what type of notification when critical events occur?
A. SNMP
B. syslog
C. PBX
D. e-mail
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 73
As which two options can an RMON event manifest itself? (Choose two.)
A. log entry
B. email message
C. SNMP trap
D. script action
E. alarm
Correct Answer: AC Section: (none) Explanation
Explanation/Reference:
QUESTION 74
You have connected the Cisco MDS 9222i Switch to the existing Brocade SAN fabric which consists of five 32-port Brocade switches. You have selected interoperability mode 3, created VSAN 10 that operates in that interoperability mode, and configured the fc1/1 interface that is connected to the Brocade as an E_port. The connectivity is still broken. Which option should you apply to fix the connectivity?
A. Change the interoperability mode to 0.
B. Restart the Brocade switch for the interoperability mode to work.
C. Set BB_credits on the MDS 9222i fc1/1 interface to 16.
D. Deploy static DomainID using values from 1 to 31. “Pass Any Exam. Any Time.” – www.actualtests.com 32 Cisco 642-359: Practice Exam
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 75
With regards to FCIP encapsulation, which statement is true?
A. The Fibre Channel frame is encapsulated into an IP packet.
B. The Fibre Channel frame is encapsulated into an MPLS packet.
C. The Fibre Channel frame is encapsulated into an Ethernet frame.
D. The Fibre Channel frame is encapsulated into an iSCSI packet.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 76
When large Fibre Channel frames must be sent from an MSM 18/4 module at the central site to the remote offices, what is the consequence of disabling the Path MTU Discovery and using the default Ethernet MTU?
A. Packet shaping becomes effective.
B. Minimum retransmission interval is prolonged.
C. Jumbo frames are enabled.
D. Large Fibre Channel frames are fragmented.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 77
Refer to the exhibit. The customer’s ISL links are flapping and seem to go down every few days. While troubleshooting the problem, they determine that the speed of failover to the redundant path is taking too long. What is the recommended solution to the problem, involving turning on a feature?
“Pass Any Exam. Any Time.” – www.actualtests.com 33 Cisco 642-359: Practice Exam
A. use port tracking
B. disable the flapping ISL
C. use port channel
D. adjust FSPF link costs
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
Explanation:
NEW QUESTIONS
QUESTION 78
A customer has some performance problems in their SAN environment. They want to use a Cisco MDS 9000 Port Analyzer Adapter to connect to the Cisco MDS Switch to troubleshoot the performance problems. Which two options need to be configured on the MDS Switch? (Choose two.)
A. Put the port into the proper zone that will be monitored.
B. Set the port speed to the value corresponding with the PAA setting.
C. Put the port in SD port mode.
D. Configure any port channel necessary.
E. Turn off flow control
Correct Answer: DE Section: (none) Explanation
Explanation/Reference:
“Pass Any Exam. Any Time.” – www.actualtests.com 34 Cisco 642-359: Practice Exam
QUESTION 79
What must be changed when connecting the Cisco MDS Switch to an existing McData switch using interoperability mode 4?
A. The VSAN 1 must be used.
B. The MDS sWWN must be configured using McData OUI.
C. The fcdomain must be disruptively restarted.
D. Source, destinction, and exchange ID load balancing must be used.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 80
Refer to the exhibit.
The customer connects two switches or which the E_port does not come up. Which command should the administrator use resolve the problem?
A. mds(config)# fcdomain domain 3 static vsan 1 mds(config)# fcdomain restart disruptive vsan 1
B. mds(config)# fcdomain domain 3 static vsan 1 mds(config)# fcdomain restart vsan 1
C. mds(config-vsan-db)# fcdomain domain 3 static vsan 1 mds(config-vsan-db)# fcdomain restart disruptive vsan 1
D. mds(config-vsan-db)# fcdomain domain 3 static vsan 1 mds(config-vsan-db)# fcdomain restart vsan 1
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
“Pass Any Exam. Any Time.” – www.actualtests.com 35 Cisco 642-359: Practice Exam
QUESTION 81
What would you do to connect the Nexus 5000 switch to the existing Fibre Channel SAN, where the Brocade switch with core PID = 0 is used, without disruption to the existing network?
A. Use interoperability mode 2 on the Nexus 5000.
B. Use standard interoperability mode 0 on both switches.
C. Connect the Brocade switch through an MDS with VSANs deployed.
D. Deploy VSANs and inter-VSAN routing on the Nexus 5000.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 82
You have connected your Cisco MDS 9508 Switch to an existing McData SAN fabric using VSAN 100. You have changed the sWWN using McData OUI, deployed static DomainID 10, and changed the VSAN 10 interoperability mode to 4. The Cisco MDS is having a connectivity problem with the McData-based fabric. Why is there no connectivity?
A. Only VSAN 1 can be used to connect to McData switches.
B. You have forgotten to unsuspend VSAN 100.
C. To use interoperability mode 4, you need to reset the McData switch.
D. The zoning must be done using the sWWN and interface ID.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 83
Refer to the exhibit.
“Pass Any Exam. Any Time.” – www.actualtests.com 36 Cisco 642-359: Practice Exam
Which option should you deploy to prevent man-in-the-middle attacks?
A. IPsec
B. fabric binding
C. FC-SP
D. SME
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
Whenever Cisco candidates take a tour of sample questions of Cisco 642-359 exam they find their training to be matchless to great extent.Passing the Cisco 642-359 on your own can be a difficult task,but with Cisco 642-359 preparation products,many candidates who appeared online passed Cisco 642-359 easily.
Free Sharing Flydumps Apple 9L0-007 exam questions and answers are constantly being revised and updated for relevance and accuracy.Many candidates has passed the Apple 9L0-007 exam easily by training the new version.100% pass rate.
QUESTION 21
Which of the following is a valid precaution you should take while working inside an I Mac (24-inch Late 2006) system that is plugged into AC power but has not yet been powered on?
A. Do not turn the unit upside-down
B. Avoid putting your fingers near the fans
C. Make sure you are NOT wearing a grounded ESD wrist strap
D. Do not touch the processor heat sink because it could burn your fingers
Correct Answer: C
QUESTION 22
A MacBook Pro with a known-good main battery fails to power on, even when connected to a known-good power adapter. Which of the following should be tried FIRST?
A. Reset the SMC
B. Replace the logic board
C. Replace the DC in board
D. Run apple Service Diagnostic
Correct Answer: A
QUESTION 23
A MacBook sometimes becomes unresponsive and the cursor freezes on the display when running an application. You have verified the symptom, and have already attempted to force the application to quit, but the computer remains unresponsive. What should you try next?
A. Disconnect all power sources for several minutes to reset the SMC
B. Hold the eject button down for several seconds to reset the application
C. Hold the trackpad button down for several seconds to regain cursor control
D. Press the power button for several seconds to try shutting the computer down
Correct Answer: D
QUESTION 24
What is the proper way to calibrate the main battery in a MacBook?
A. Charge the battery while running the Battery Calibration Utility
B. The battery is calibrated out of the box, no further steps are needed
C. Charge the battery overnight. Make sure battery status indicates 100% before disconnecting AC adapter
D. Charge the battery fully. Wait 2 hours. Run the MacBook on battery until it goes to sleep. Wait 5 hours. Charge it fully again
E. Charge the battery halfway. Wait 2 hours. Finish charging the battery. Run the MacBook on battery until it goes to sleep. Charge it fully again.
Correct Answer: D QUESTION 25
What precautions should be taken if a discharged CRT must remain exposed for any length of time?
A. You should reset the Power Manager Unit on the logic board
B. You should perform a full set of video adjustments on the CRT
C. You should remove the CRT from the computer or display assembly
D. You should establish an ongoing connection between the CRT anode and ground
Correct Answer: D QUESTION 26
Which section of any Apple service manual is the BEST place to look for instructions for replacing an internal component?
A. Views
B. Basics
C. Take Apart
D. Troubleshooting
Correct Answer: C QUESTION 27
Which of the following scenarios would be most appropriate to use Apple hardware Test?
A. You want to test a Mac’s Ethernet port after its logic board has been replaced
B. You are unsure if the customer’s issue is caused by software or hardware
C. You need to check the Mac’s LCD display for any pixel anomalies
D. You want to verify that Mac OS X has been installed properly
Correct Answer: B QUESTION 28
Verifying that a computer functions properly after you repair it ensures that______.SELECT THREE
A. third –party software is working
B. the original issue has been resolved
C. the computer fails under service warranty
D. the computer will continue to function after the repair
E. no new problems have been introduced during the repair
Correct Answer: BDE QUESTION 29
Examine the exhibit. What type of AirPort Extreme (802.11n) port does the number “2” identify?
A. USB
B. Power
C. FireWire
D. Ethernet
Correct Answer: A QUESTION 30
Which of the following is NOT a good step to take when working onsite on a computer?
A. Place parts on the floor
B. Use a grounded ESD mat
C. Wear a grounded ESD wrist strap
D. Check the polarity of the grounded power outlet
Correct Answer: A QUESTION 31
Examine the exhibit. Is this the correct tool to remove the top cover from a MAC mini?
A. Yes
B. No Correct Answer: A QUESTION 32
Which one of the following is NOT a risk when working around CRTs?
A. Implosion
B. Overheating
C. Electric shock
D. Toxi materials
Correct Answer: B
QUESTION 33
Which of the following statements describes how CCFL backlighting is similar to LED backlighting when troubleshooting backlighting issues in Apple displays?
A. Both types of displays use an inverter board.
B. Both types of displays are diagnosed identically.
C. Both types of displays are powered by a low DC voltage source.
D. Both types of displays have components that are individually replaceable.
Correct Answer: B
Flydumps is ready to provide Apple 9L0-007 candidates with Apple 9L0-007 training materials which can be very much helpful for getting Apple 9L0-007 certification, which means that candidates.Apple 9L0-007 can easily get access to the services of Apple 9L0-007 for practice exam, which will assure them 100% Apple 9L0-007 success rate.Though Apple 9L0-007 tests are not easy at all,but they do not make Apple 9L0-007 things complicated.