Day: May 17, 2016
Attention Please: Professional new version Cisco 642-359 PDF and VCE dumps can now free download on Cert4sure.net, all are updated timely by our experts covering all new questions and questions. 100 percent pass your Cisco 642-359 exam.
Exam A
QUESTION 1
While examining the output of a show run command on the Cisco MDS 9000 Series, you notice that the
statement interface GigabitEthernet2/12 appears in the output. What does this mean?
Select the best response.
A. It refers to the second FCIP tunnel that is configured on port GigabitEthernet2/1
B. It refers to a VLAN subinterface on port GigabitEthernet2/1
C. It means that port GigabitEthernet2/1 is assigned to VSAN 2
D. It is a mistake in the interface configuration.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 2
The HBA on your storage server only supports the NL_Port mode. Which interface type on the Cisco MDS 9000 Series fabric switches can support this HBA? Select the best response.
A. F
B. TE
C. FL
D. N
E. E
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 3
For purposes of granting restricted access to statically configure iSCSI virtual targets, which three of these can be used to identify iSCSI initiators? (Choose three.) Select 3 response(s).
A. iSCSI node name
B. host name
C. IPv4 address and subnet PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359
D. MAC address
E. IPv6 address
F. iSCSI WWN
Correct Answer: ACE Section: (none) Explanation
Explanation/Reference:
QUESTION 4
What is a benefit of enhanced zoning? Select the best response.
A. fabric locked during configuration changes
B. larger zoning database size
C. database rollback in case of failure
D. zones allowed to span VSANs
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 5
How many ports are addressable on a fabric arbitrated loop? Select the best response.
A. 126
B. 127
C. 255
D. 256
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 6
Which three of the following are possible reasons why a line card module does not come online? (Choose
three.)
Select 3 response(s).
A. Port indexes have been taken offline.
B. Available port indexes are noncontiguous.
C. Not enough power is available in the chassis.
D. An invalid interoperability mode has been configured.
E. Unsupported SFPs have been installed.
F. Not enough port indexes are available.
Correct Answer: BCF Section: (none) Explanation
Explanation/Reference:
QUESTION 7
Which of the following tools would you use to view SCSI error count statistics?
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359
Select the best response.
A. Cisco Performance Manager
B. RMON
C. Cisco Traffic Analyzer
D. Cisco Fabric Analyzer
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 8
Why would you use the fcanalyzer command? Select the best response.
A. to ensure that Fibre Channel configuration settings are synchronized across all switches in the fabric
B. to identify common configuration errors in the fabric
C. to nondisruptively capture and decode Fibre Channel control frames
D. to decode and analyze Fibre Channel frames and ordered sets on a link
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 9
Which two features help you verify connectivity between host and storage devices? (Choose two.) Select 2 response(s).
A. fcanalyzer
B. Cisco Traffic Analyzer
C. End-to-End Connectivity Analysis
D. Zone Merge Analysis
E. fcping
Correct Answer: CE Section: (none) Explanation
Explanation/Reference:
QUESTION 10
Which feature detects hardware faults and attempts recovery actions? Select the best response.
A. Switch Health Analysis
B. Fabric Configuration Analysis
C. Online Health Management System
D. End-to-End Connectivity Analysis
E. Cisco Fabric Services PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 11
A customer has reported performance degradation in the SAN. The system administrator would like to track read-write I/O and LUN use on several devices. The devices are directly connected to various switches and belong to different VSANs. The administrator wants to gather information for the last 72
hours.
Which of the following Cisco MDS 9000 Series tools is needed to track SCSI I/O and LUN statistics?
Select the best response.
A. Cisco Fabric Manager
B. Cisco Traffic Analyzer and PAA
C. Cisco Performance Manager
D. Cisco Fabric Analyzer
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 12
Which services are supported by a Cisco NX-OS AAA configuration? Select the best response.
A. Telnet, SSH, FM and DM logins
B. Console login, FC-SP authentication, FTP
C. FC-SP authentication, FM and DM logins, TFTP
D. iSCSI authentication, FTP, FC-SP authentication
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 13
Which two Cisco MDS 9000 Series Switches are used in small- and medium-sized SAN topologies?
(Choose two.)
Select 2 response(s).
A. Cisco MDS 9124
B. Cisco MDS 9222i
C. Cisco MDS 9506
D. Cisco MDS 9509
E. Cisco MDS 9513
Correct Answer: AB Section: (none) Explanation
Explanation/Reference:
QUESTION 14
Which second-generation Fibre Channel module offers a full 4Gb/s line rate on all ports?
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359
Select the best response.
A. 12-port 1/2/4 Gb/s Fibre Channel module
B. 24-port 1/2/4 Gb/s Fibre Channel module
C. 24-port 1/2/4/8 Gb/s Fibre Channel module D. 48-port 1/2/4 Gb/s Fibre Channel module
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 15
Which Cisco MDS 9000 Series Switch has non-field-replaceable fans? Select the best response.
A. Cisco MDS 9124
B. Cisco MDS 9134
C. Cisco MDS 9222i
D. Cisco MDS 9506
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 16
When using the Cisco MDS 9000 Switches, which protocol provides in-band management? Select the best response.
A. FCIP
B. IPFC
C. iSCSI
D. SNMP
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 17
What is a benefit of using the Cisco Fabric Manager Software Install Wizard instead of using the CLI-based software upgrade?
Select the best response.
A. can be used to upgrade multiple switches with a single procedure
B. shows the upgrade procedure progress
C. upgrades kickstart and system images in a single step
D. notifies when upgrade procedure has finished
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 18
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359 A junior SAN engineer is asked to prepare the configuration for the NPV edge switch. The NPV edge switch will be connected to the NPV core switch via the fc 1/24 interface. The end device will be connected to the fc 1/1 interface and should be placed in VSAN 10 Which configuration for the NPV edge switch accomplishes this request? Select the best response.
153373-15
153373-7
153373-3
153373-11 PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359
Correct Answer: B Section: (none) Explanation Explanation/Reference:
QUESTION 19
Which two options can be used to enable flex-attach when automatic assignment is used? (Choose two.) Select 2 response(s).
A. global across all NPV switches
B. global across all NPIV-enabled switches
C. per interface or interface range
D. per server WWN
E. per server FC-ID
Correct Answer: AC Section: (none) Explanation
Explanation/Reference:
QUESTION 20
Refer to the exhibit. When looking at the Cisco Fabric Manager, you notice that one of the switches has this symbol superimposed on it. What is the reason? Select the best response.
A. The device is manageable but there are operational problems.
B. The device is online but not working properly.
C. The device is not manageable.
D. The device is down.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 21
What type of information can the Cisco Fabric Analyzer capture and decode? Select the best response.
A. data traffic within a specific VSAN
B. data traffic within all VSANs PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359
C. control traffic within the supervisor module only
D. control traffic from anywhere on a switch
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 22
As which two options can an RMON event manifest itself? (Choose two.) Select 2 response(s).
A. log entry
B. email message
C. SNMP trap
D. script action
E. alarm
Correct Answer: AC Section: (none) Explanation
Explanation/Reference:
QUESTION 23
Refer to the exhibit. The customer connects two switches for which the E_port does not come up. Which command should the administrator use to resolve the problem?
Select the best response.
A. mds(config)# fcdomain domain 3 static vsan 1 mds(config)# fcdomain restart disruptive vsan 1
B. mds(config)# fcdomain domain 3 static vsan 1 mds(config)# fcdomain restart vsan 1
C. mds(config-vsan-db)# fcdomain domain 3 static vsan 1 mds(config-vsan-db)# fcdomain restart disruptive vsan 1
D. mds(config-vsan-db)# fcdomain domain 3 static vsan 1 mds(config-vsan-db)# fcdomain restart vsan 1
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359
QUESTION 24
Refer to the exhibit. The customer wants to upgrade the Cisco MDS 9500 Switch. When they execute the install all command, this output is displayed. What will occur on the modules for which the upgrade’s impact was shown as disruptive? Select the best response.
A. The data flow through the switch will be corrupted and can disastrously affect data consistency.
B. The data flow will be interrupted, and the hosts should be shut down during the upgrade to prevent problems.
C. The data flow will be interrupted, and the applications should be put in the paused and consistent state during the upgrade.
D. The data flow will be paused. No intervention is necessary on the servers.
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 25
Refer to the exhibit. The customer network has blue and red VSANs redundantly connected, Path A having a 4-ISL port channel and Path B having a 2-ISL port channel. Changes to the physical topology are not allowed for the next six months. All the traffic now flows over Path A with congestion occurring on both VSANs at peak times. The blue VSAN is, on the average, generating four times the amount of data than that of the red VSAN. How can the blue and red VSAN traffic be separated over the two paths, while preserving redundancy?
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359 Select the best response.
A. Make a zone in the blue VSAN with only ISL ports on Path B, and make another zone in the red VSAN with only ISL ports on Path A.
B. Make a zone in the blue VSAN with only ISL ports on Path A, and make another zone in the red VSAN with only ISL ports on Path B.
C. In the blue VSAN, give Path B a lower FSPF cost than Path A; in the red VSAN, give Path A a lower FSPF cost than Path B.
D. In the blue VSAN, give Path A a lower FSPF cost than Path B; in the red VSAN, give Path B a lower FSPF cost than Path A.
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 26
Which command would you use to configure Cisco Fabric Analyzer to display only SCSI-level protocol
traffic for the whole switch? The display needs to be output on the console.
Select the best response.
A. switch(config)# fcanalyzer local display-filter fcp_cmd
B. switch(config)# fcanalyzer display-filter fc_cmd
C. switch(config)# fcanalyzer local display-filter scsi
D. switch(config)# fcanalyzer local display-filter scsi_cmd
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359
QUESTION 27
Refer to the exhibit. The Cisco Device Manager screen shows multiple problems in a SAN environment. Which two problems are displayed? (Choose two.) Select 2 response(s).
A. The amount of RAM in the switch is running out.
B. The amount of NVRAM in the switch is running out.
C. Disk on port fc1/6 is at the limit of its receive bandwidth.
D. Port iscsi2/2 is misconfigured.
E. There is a problem with the CPU.
Correct Answer: BC Section: (none) Explanation
Explanation/Reference:
QUESTION 28
Refer to the exhibit. What alarm will be sent for this RMON event? 191837412jpg Select the best response.
A. FCIP link failure
B. Fibre Channel link down
C. Fibre Channel link failure
D. Fibre Channel link reestablishment
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 29
A customer has some performance problems in their SAN environment. They want to use a Cisco MDS
9000 Port Analyzer Adapter to connect to the Cisco MDS Switch to troubleshoot the performance
problems. Which two options need to be configured on the MDS Switch? (Choose two.)
Select 2 response(s).
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359
A. Put the port into the proper zone that will be monitored.
B. Set the port speed to the value corresponding with the PAA setting.
C. Put the port in SD port mode.
D. Configure any port channel necessary.
E. Turn off flow control.
Correct Answer: BC Section: (none) Explanation
Explanation/Reference:
QUESTION 30
Refer to the exhibit. The customer’s ISL links are flapping and seem to go down every few days. While
troubleshooting the problem, they determine that the speed of failover to the redundant path is taking too
long. What is the recommended solution to the problem, involving turning on a feature?
Select the best response.
A. use port tracking
B. disable the flapping ISL
C. use port channel
D. adjust FSPF link costs
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 31
Which configuration will enable remote access management using Telnet? Select the best response.
A. interface mgmt0 ip address 10001 2552552550 remote-access enable PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359
B. interface mgmt0 ip address 10001 2552552550 feature telnet enable
C. interface mgmt0 ip address 10001 2552552550 telnet enable
D. interface mgmt0 ip address 10001 2552552550 telnet server enable
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 32
When large Fibre Channel frames must be sent from an MSM 18/4 module at the central site to the remote
offices, what is the consequence of disabling the Path MTU Discovery and using the default Ethernet
MTU?
Select the best response.
A. Packet shaping becomes effective.
B. Minimum retransmission interval is prolonged.
C. Jumbo frames are enabled.
D. Large Fibre Channel frames are fragmented.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 33
With regards to FCIP encapsulation, which statement is true? Select the best response.
A. The Fibre Channel frame is encapsulated into an IP packet.
B. The Fibre Channel frame is encapsulated into an MPLS packet.
C. The Fibre Channel frame is encapsulated into an Ethernet frame.
D. The Fibre Channel frame is encapsulated into an iSCSI packet.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 34
Which command enables connectivity to a management VSAN via 100010 IP gateway when IPFC in-band
management is used?
Select the best response.
A. ip route 0000 0000 100010
B. route 0/0 100010
C. default-gateway 100010
D. route add default 100010
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 35
Which command is used to configure VLAN 100 on the Gigabit Ethernet 2/1 interface through
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359
which iSCSI-enabled servers should be connected to the Fibre Channel targets? Select the best response.
A. interface gigabitethernet 2/1100
B. interface gigabitethernet 2/1 vlan 100
C. interface gigabitethernet 2/1 encapsulation isl 100
D. interface gigabitethernet2/1 vlan 100
Correct Answer: A Section: (none) Explanation Explanation/Reference:
QUESTION 36
Which access control list configuration allows the IP traffic from the 10001 host to be moved to the
192168202 host only?
Select the best response.
A. ip access-list ACL1 permit ip 10001 0000 192168202 0000
B. access-list 10 permit host 10001 host 192168202
C. access-list ACL1 permit source host 10001 destination host 192168202
D. filter ACL permit host 10001 host 192168202
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 37
Refer to the exhibit. What would happen if one of the power supplies failed? Select the best response.
A. There would be no disruption regarding MDS operation. PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359
B. The MDS would shut down the standby supervisor to compensate for the power loss.
C. The MDS would reset the failed power supply in an attempt to resolve the problem.
D. Due to insufficient power, the MDS would shut down some modules.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 38
The customer wants to create and use custom-based reports to monitor the operation of the deployed MDS switches and the overall health of the SAN. Which option is required in order to use custom reports? Select the best response.
A. standalone Cisco Fabric Manager
B. Cisco Device Manager with Enterprise license installed
C. Cisco Fabric Manager Server with Cisco Performance Manager
D. PAA, SPAN, and protocol analyzer
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 39
If you have a brand new Cisco MDS Switch and you are using the initial setup routine, what information
must be entered?
Select the best response.
A. Admin password
B. Default switch port interface state
C. Management IP address
D. Login account
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 40
Refer to the exhibit. While troubleshooting, you clear the fc1/10 interface counters and reset the interface. What is the reason that interface fc1/10 is down?
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-359 Select the best response.
A. The interface speed is misconfigured.
B. The SFP is missing.
C. The fiber-optic cable’s transmit and receive pins are not correctly connected.
D. The peer switch uses a different interoperability mode.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
Cisco 642-359 Exam Certification Guide presents you with an organized test preparation routine through the use of proven series elements and techniques.“Do I Know This Already?”quizzes open each chapter and allow you to decide how much time you need to spend on each section.Cisco 642-359 lists and Foundation Summary tables make referencing easy and give you a quick refresher whenever you need it.Challenging Cisco 642-359 review questions help you assess your knowledge and reinforce key concepts.Cisco 642-359 exercises help you think about exam objectives in real-world situations, thus increasing recall during exam time.
New Updated Questions Where to find the newest Cisco 642-359 exam dumps? if you want to pass exam Cisco 642-359 without the second try, you should download the latest updated Cisco 642-359 braindump for preparing. Now visit Cert4sure.net to get free pdf study guide with valid Cisco 642-359 exam dumps and free vce dumps, which will help you passing quickly!
Exam A
QUESTION 1
Which command would you use to determine if device aliases in VSAN 5 are configured for fabriC.wide distribution?
A. show zoneset name alias vsan 5
B. show cfs application name device-alias
C. showfcalias distribution vsan 5
D. show vsan 5 device-alias status
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 2
DRAG DROP
Drop
Drag the Cisco analysis tool on the left to its appropriate description on the right.
Drag and drop question. Drag the items to the proper locations.
A. 1=3 , 2=2, 3=4, 4=3
B.
C.
D.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
“Pass Any Exam. Any Time.” – www.actualtests.com 2 Cisco 642-359: Practice Exam
Explanation:
QUESTION 3
The MDS 9000 family switches use what three technologies to protect against unauthorized management access? (Choose three.)
A. SNMPV3
B. SSH
C. RBAC
D. RMON
E. ses
F. WEBM
Correct Answer: ABC Section: (none) Explanation
Explanation/Reference:
“Pass Any Exam. Any Time.” – www.actualtests.com 3 Cisco 642-359: Practice Exam
QUESTION 4
What is a benefit of enhanced zoning?
A. fabric locked during configuration changes
B. larger zoning database size
C. database rollback in case of failure
D. zones allowed to span VSANs
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 5
Which two of these environments suggest the use of FCIP Write Acceleration? (Choose two.)
A. remote tape backup
B. Port Channel links between sites
C. applications that support multiple outstanding l/Os
D. fast network with minimal delays
E. DWDM links
Correct Answer: BC Section: (none) Explanation
Explanation/Reference:
QUESTION 6
Which three of the following are possible reasons why a line card module does not come online? (Choose three.)
A. Port indexes have been taken offline.
B. Available port indexes are noncontiguous.
C. Not enough power is available in the chassis.
D. An invalid interoperability mode has been configured.
E. Unsupported SFPs have been installed.
F. Not enough port indexes are available.
Correct Answer: BCF Section: (none) Explanation
Explanation/Reference:
QUESTION 7
Refer to the exhibit.
“Pass Any Exam. Any Time.” – www.actualtests.com 4 Cisco 642-359: Practice Exam
Which two options from the Tools menu would you select to verify connectivity and latency to a Fibre Channel end device? (Choose two.)
A. Switch Health
B. Fabric Configuration
C. End to End Connectivity
D. Ping
E. Device Manager
Correct Answer: CD Section: (none) Explanation
Explanation/Reference:
QUESTION 8
During initial switch configuration, the administrator elects to enable full zoneset distribution. What is the impact of this choice during zoneset activation?
A. only the active zoneset is distributed to all switches in the fabric
B. both the full zone database and active zoneset are distributed to all switches in the fabric
C. both FCID and WWN information are distributed to all switches in the fabric
D. only the full zone database is distributed to all switches in the fabric
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 9
You are asked to review the running configuration of a switch that a junior administrator has prepared to be placed in a heterogeneous SAN environment. This environment includes three different brands of Fibre Channel switches. In this particular environment, only VSAN 1 is being used.
“Pass Any Exam. Any Time.” – www.actualtests.com 5 Cisco 642-359: Practice Exam
Which of these attributes suggests that the switch has been incorrectly configured?
A. Astatic domain ID has been set to 0x21.
B. The srC.dst-ox load balancing has been selected.
C. Interop mode 1 has been selected.
D. FCC has been enabled.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 10
DRAG DROP
Drop
Drag the correct compression mode on the left to its appropriate bandwidth on the right.
Drag and drop question. Drag the items to the proper locations.
A. mode1=2 , mode2=3 , mode3=1 , auto=4
B.
C.
D.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
“Pass Any Exam. Any Time.” – www.actualtests.com 6 Cisco 642-359: Practice Exam
Explanation:
QUESTION 11
DRAG DROP
Drop
Click and drag each item on the left to its correct security description on the right.
Drag and drop question. Drag the items to the proper locations.
A. 1=6 , 2=2 , 3=3 , 4=5 , 5=4 , 6=1
B.
C.
D.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
“Pass Any Exam. Any Time.” – www.actualtests.com 7
QUESTION 12
When configuring FCIP, packet fragmentation should be avoided in order to achieve optimal throughput. Fragmentation can be avoided by knowing which of the following?
A. MTU of the source IP interface
B. largest MTU in the path
C. smallest MTU in the path
D. MTU of the destination IP interface
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 13
When configuring FCIP, packet fragmentation should be avoided in order to achieve optimal throughput. Fragmentation can be avoided by knowing which of the following?
A. MTU of the source IP interface
B. largest MTU in the path
C. smallest MTU in the path
D. MTU of the destination IP interface
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 14
For purposes of granting restricted access to statically configure iSCSI virtual targets, which three of these can be used to identify iSCSI initiators? (Choose three.)
“Pass Any Exam. Any Time.” – www.actualtests.com 8 Cisco 642-359: Practice Exam
A. iSCSI node name
B. hostname
C. IPv4 address and subnet
D. MAC address
E. IPv6 address
F. iSCSIWWN
Correct Answer: ACE Section: (none) Explanation
Explanation/Reference:
QUESTION 15
You have been asked to convert three existing ISLs into a PortChannel as nondisruptively as possible.
Which approach will best accomplish this?
A. Place all three ISLs into a PortChannel, because PortChannel creation is a nondisruptive operation.
B. Convert the ISLs into an EISL and then place them into a PortChannel.
C. Place one link into a single-link PortChannel and then add the other two links to the PortChannel.
D. Ensure that the VSAN allowed lists on both ends of each link are identically configured, then create the three-link PortChannel.
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 16
“Pass Any Exam. Any Time.” – www.actualtests.com 9 Cisco 642-359: Practice Exam
Which three statements describe automatically supported, basic zone features (no additional configuration required) in the Cisco MDS 9000 Family of switches? (Choose three.)
A. A VSAN contains the zone sets.
B. Zone reactivation can disrupt existing traffic.
C. A zone or zone set with the same name can exist in each VSAN.
D. Hard zoning can be disabled.
E. Active zone sets are preserved across switch reboots
F. Default zoning behavior is to distribute the Full Zone Database.
Correct Answer: ACE Section: (none) Explanation
Explanation/Reference:
QUESTION 17
Which three options allow or enable nondisruptive upgrades? (Choose three.)
A. IPS module software upgrades
B. dual supervisor modules on a Cisco MDS 9500 Series switch
C. using the install-all command
D. upgrading the loader
E. installing a license F – using the reload command
Correct Answer: BCE Section: (none) Explanation
Explanation/Reference:
QUESTION 18
Which services are supported by a Cisco SAN-OS AAA configuration?
A. Telnet, SSH, FM and DM logins
B. console login, FC.SP authentication, FTP
C. FC.SP authentication, FM and DM logins, TFTP
D. iSCSI authentication, FTP, FC.SP authentication
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 19
How many ports are addressable on a fabric arbitrated loop?
A. 126 “Pass Any Exam. Any Time.” – www.actualtests.com 10 Cisco 642-359: Practice Exam
B. 127
C. 255
D. 256
Correct Answer: B Section: (none) Explanation Explanation/Reference:
QUESTION 20
A customer with multiple vendor switches establishes an ISL between a non-Cisco switch and an E_Port
on a Cisco MDS 9000 switch.
Which three statements are true about the interop behavior between the two switches? (Choose three.)
A. Exchange-based load balancing is supported in all interop modes.
B. Interop mode affects all VSANs.
C. Only E_Ports can be used to connect to non-Cisco MDS switches.
D. The non-Cisco switch must have matching FC timers with the VSAN containing the E_Port on the Cisco MDS 9000 Series switch.
E. Adding another ISL between the switches will allow a PortChannel to be configured for HA.
F. Interop mode 1 allows full featured communication between all combinations of MDS and non- MDS switches
Correct Answer: ACD Section: (none) Explanation
Explanation/Reference:
QUESTION 21
Which license is required on switches that are going to implement LUN zoning?
A. Storage Services Enabler
B. Enterprise license
C. Fabric Manager Server license
D. SAN Extension over IP license
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 22
DRAG DROP
Drop
Match the definition on the left with its appropriate word or phrase about switch interoperability on the right.
“Pass Any Exam. Any Time.” – www.actualtests.com 11
Cisco 642-359: Practice Exam
Drag and drop question. Drag the items to the proper locations.
A. 1=2, 2=1, 3=4, 4=5, 5=3
B.
C.
D.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
Explanation:
“Pass Any Exam. Any Time.” – www.actualtests.com 12 Cisco 642-359: Practice Exam
QUESTION 23
Which two of these logging statements are true? (Choose two.)
A. Call Home message level 0 is most urgent and level 7 is least urgent, whereas the syslog level 9 is most urgent and level 0 is least urgent.
B. Syslog message level 0 is most urgent and level 7 is least urgent, whereas the Call Home message level 9 is most urgent and level 0 is least urgent,
C. Syslog message level 7 is most urgent and level 0 is least urgent, whereas the Call Home message level 9 is most urgent and level 0 is least urgent.
D. Accounting logs can be stored locally and sent to remote AAA servers.
E. Go to logs > syslog > setup in Device Manager to view the local accounting log.
Correct Answer: BD Section: (none) Explanation
Explanation/Reference:
QUESTION 24
Which of these Cisco Fabric Manager debugging tools can compare the current configuration with a previously saved configuration file?
A. Switch Health Analysis
B. Fabric Configuration Analysis
C. EnD.to-End Connectivity Analysis
D. Zone Merge Analysis
Correct Answer: B Section: (none) Explanation Explanation/Reference:
QUESTION 25
Choose the correct list of tasks to configure Remote Spanning.
A. Create a VSAN interface. Enable a Fibre Channel tunnel. Initiate the Fibre Channel tunnel. Configure the ST_Port in the source switch. Configure the SD_Port in the destination switch. Configure a SPAN session in the source switch.
B. Create a VSAN interface. Enable a Fibre Channel tunnel. Initiate the Fibre Channel tunnel. Configure the ST_Port in the source switch. Configure the SD_Port in the destination switch. Configure an RSPAN session in the source switch.
C. Create an RSPAN interface. Enable a Fibre Channel tunnel. Initiate the Fibre Channel tunnel. Configure the SD_Port in the destination switch. Configure the ST_Port in the source switch. Configure an RSPAN session in the source switch.
D. Create a VSAN interface. Enable a Fibre Channel tunnel. Initiate the Fibre Channel tunnel. Configure the ST_Port in the destination switch. Configure the SD_Port in the source switch. “Pass Any Exam. Any Time.” – www.actualtests.com 13 Cisco 642-359: Practice Exam Configure an RSPAN session in the source switch.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 26
When creating an Inter-VSAN routing topology, which type of World Wide Name (WWN) must be used?
A. Port WWN
B. Switch WWN
C. Fabric Port WWN
D. VSAN WWN
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 27
Your company has a multiswitch fabric including Switch A and Switch B. An administrator of Switch A creates the following zone set and successfully activates it: zoneset name ZoneSetl vsan 1 zone name Zonel vsan 1 pwwn 21:01:00:e0:8b:3c:03:b6 pwwn 21:01:00:e0:8b:3c:55:bb Later in the day, a second administrator creates the following zone set on Switch B: zoneset name ZoneSet2 vsan 1 zone name Zonel vsan 1 pwwn 21:01:00:e0:8b:3c:03:b6 pwwn 21:01:00:e0:8b:3c:55:aa What happens when the administrator of Switch B attempts to activate ZoneSet2?
A. ZoneSet2 becomes the active zone set for both Switches A and
B.
C. The fabric segments and ZoneSet2 become the active zone set for Switch B only.
D. The fabric segments and ZoneSet2 become the active zone set for Switch A only.
E. The fabric segments and ZoneSetl remain the active zone set for Switch B, while ZoneSet2 becomes the active zone set for Switch A.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 28
“Pass Any Exam. Any Time.” – www.actualtests.com 14 Cisco 642-359: Practice Exam
You have been asked to configure a port on your Cisco MDS switch so that a host can join your fabric. Which of these switch port types should the port be set to?
A. N_Port
B. NL_Port
C. F_Port
D. E_Port
E. TE_Port
F. SD Port
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 29
DRAG DROP
Drop The IT director wants to standardize the process that the SAN team follows when troubleshooting the SAN. IT director wants to leverage the tools that are provided by Cisco Fabric Manager so that each member of the team executes the samesteps when faced with a problem in the SAN. Click and drag the Cisco Fabric Manager troubleshooting tool to the purpose it serves in the repair strategy.
Drag and drop question. Drag the items to the proper locations.
A. 1=2, 2=4, 3=3, 4=1
B.
C.
D.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
“Pass Any Exam. Any Time.” – www.actualtests.com 15 Cisco 642-359: Practice Exam
Explanation:
QUESTION 30
Which of the following tools would you use to view SCSI error count statistics?
A. Cisco Performance Manager
B. RMON
C. Cisco Traffic Analyzer
D. Cisco Fabric Analyzer
Correct Answer: C Section: (none)
Explanation
Explanation/Reference:
QUESTION 31
A customer would like to implement a low-cost traffic engineering solution that provides a primary data path, and a secondary data path that will only be used in the event of a failure in the primary path. Which of these solutions best meets the customer needs?
A. VSAN allowed list pruning
B. FCC
C. QoS “Pass Any Exam. Any Time.” – www.actualtests.com 16 Cisco 642-359: Practice Exam
D. FSPF link costs
E. VOQ
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 32
The output from the switch show interface command indicates that the link from a host comes up as an FL_Port. The switch port is configured as auto. Which three of these HBA configurations could cause this scenario? (Choose three.)
A. the HBA is configured as an N_Port
B. the HBA is configured as an NL_Port
C. the HBA supports only NL mode
D. the HBA is configured as a TE_Port
E. the HBA supports only FC.AL technology
F. the HBA is configured as an TL_Port
Correct Answer: BCE Section: (none) Explanation
Explanation/Reference:
QUESTION 33
Refer to the exhibit. Which of the following statements is true?
A. All users belonging to the sangroup role are allowed to perform all configuration commands except fspf commands because the deny config feature fspf is listed first.
B. All users are allowed to perform all configuration commands because the permit config command is listed last and that will globally override all other rules.
C. All users belonging to the sangroup role to perform all configuration commands except fspf commands because it does not matter what order the rules are entered.
D. The configuration is not valid because rules are entered at the switch (config-role-vsan)# level.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 34
Which three types of network statistics can be captured with the Cisco Traffic Analyzer? (Choose three.)
“Pass Any Exam. Any Time.” – www.actualtests.com 17 Cisco 642-359: Practice Exam
A. historical reporting
B. total bandwidth used
C. Tx/Rx bandwidth per VSAN
D. Tx/Rx bandwidth per N_Port
E. class-based traffic breakdown
Correct Answer: BCD Section: (none) Explanation
Explanation/Reference:
QUESTION 35
Which two security protocols are supported in the Cisco iSCSI implementation? (Choose two.)
A. IPSec
B. FC.SP
C. SLAP
D. CHAP
E. PAP
Correct Answer: AD Section: (none) Explanation
The Cert4sure contains more than 400 practice questions for the Cisco 642-359 exams, including simulation-based questions. Also contains hands-on exercises and a customized copy of the Cisco 642-359 exams network simulation software.
100% Valid And Pass With latest Cisco 642-359 exam dumps, you will never fail your Cisco 642-359 exam. All the questions and answers are updated and added to the new version timely by our experts. Also now Cert4sure is offering free Cisco 642-359 exam VCE player and PDF files for free on their website.
Exam A
QUESTION 1
Issuing the show role command to check a defined role in an MDS 9000 Series switch will produce the following output: Role: Manage VSAN Description: Vsanpolicy: deny Permitted vsans: 2-4 Rule Type Command-type Feature 1- permit config * 2- deny config fspf 3- permit debug zone 4- permit exec fcping
Which of the following two functions can a user with role Manage undertake? (Choose two.)
A. check connectivity for VSAN 2
B. issue a debug command for a port
C. configure FC port parameters for VSAN 3
D. changefspf parameters
Correct Answer: AC Section: (none) Explanation
Explanation/Reference:
QUESTION 2
Which two options can be used to enable flex-attach when automatic assignment is used?
(Choose two.)
Select 2 response(s).
A. global across all NPV switches
B. per server WWN
C. per server FC-ID
D. per interface or interface range
E. global across all NPIV-enabled switches
Correct Answer: AD Section: (none) Explanation
Explanation/Reference:
QUESTION 3
Match the definition on the left with its appropriate word or phrase about switch interoperability on the right.
A. 1,2,3,4,5
B. 2,1,3,4,5
C. 3,1,2,4,5
D. 2,3,4,5,1
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 4
When using the Cisco MDS 9000 Switches, which protocol provides in-band management? Select the best response.
A. SNMP
B. IPFC
C. FCIP
D. iSCSI
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 5
What information does the command showflogi database provide?
A. verifies connectivity for attached devices
B. displays fabric login errors
C. displays a list of the host ports that have logged into each storage port
D. verifies that attached devices are in the correct zone
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 6
You have set up a session to the SD_Portto enable the investigation of a problem on a particular Fibre Channel port. You need to check whether this has been correctly set up for the desired port. Which command should you use?
A. showfcanalyzer
B. show span session
C. showfcflow
D. showtlport
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 7
A host is unable to access the storage network after its HBA is replaced. Which of these switch configurations could be preventing access?
A. port-mode security
B. port VSAN membership
C. port-based zoning
D. port security
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 8
Which command would you use to determine if device aliases in VSAN 5 are configured for fabriC.wide distribution?
A. showcfs application name device-alias
B. showvsan 5 device-alias status
C. showzoneset name alias vsan 5
D. showfcalias distribution vsan 5
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 9
Which feature requires the Cisco MDS 9000 Series Enterprise license?
A. centralized AAA services
B. port security
C. virtual output queues
D. PortChannels
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 10
What is the recommended minimum clearance between chassis when installing the Cisco MDS 9500 Series in a standard telco rack?
A. 2.5 inches
B. 9 inches
C. 3 inches
D. 6 inches
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 11
You work as a network administrator for Company.com. You study the exhibit carefully. When
looking at the Cisco Fabric Manager, you notice that one of the switches has this symbol
superimposed on it. What is the reason?
Exhibit:
Select the best response.
A. The device is down.
B. The device is manageable but there are operational problems.
C. The device is not manageable.
D. The device is online but not working properly.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 12
You work as a network administrator for Company.com. You study the exhibit carefully. Which of
the following statements is true?
Exhibit:
A. All users belonging to thesangroup role to perform all configuration commands except fspf commands because it does not matter what order the rules are entered.
B. All users belonging to thesangroup role are allowed to perform all configuration commands except fspf commands because the deny config feature fspf is listed first.
C. All users are allowed to perform all configuration commands because the permitconfig command is listed last and that will globally override all other rules.
D. The configuration is not valid because rules are entered at the switch (config-role-vsan)# level.
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 13
Which of the following tools would you use to view SCSI error count statistics?
A. RMON
B. Cisco Fabric Analyzer
C. Cisco Traffic Analyzer
D. Cisco Performance Manager
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 14
Which two security protocols are supported in the Cisco iSCSI implementation? (Choose two.)
A. SLAP
B. CHAP
C. IPSec
D. PAP
E. FC.SP
Correct Answer: BC Section: (none) Explanation Explanation/Reference:
QUESTION 15
While examining the output of a show run command on the Cisco MDS 9000 Series, you notice that the statement interface GigabitEthernet2/2 appears in the output. What does this mean?
A. It refers to the second FCIP tunnel that is configured on port GigabitEthernet2/1.
B. It refers to a VLAN subinterface on port GigabitEthernet2/1.
C. It means that port GigabitEthernet2/1 is assigned to VSAN 2.
D. It is a mistake in the interface configuration.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 16
What is a benefit of enhanced zoning?
A. fabric locked during configuration changes
B. larger zoning database size
C. database rollback in case of failure
D. zones allowed to span VSANs
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 17
While examining the output of a show run command on the CiscoMDS9000Series, you notice that the statement interface GigabitEthernet2/1.2 appears in the output. What does this mean?
A. It refers to these condFCIP tunnel that is configured on port GigabitEthernet2/1.
B. It refers to a VLAN subinterface on port GigabitEthernet2/1.
C. It means that port GigabitEthernet2/1is assigned to VSAN2.
D. It is a mistake in the interface configuration.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 18
The HBA on your storage server only supports the NL_Port mode. Which interface type on the Cisco MDS9000Series fabrics witches can support this HBA?
A. F
B. TE
C. FL
D. N E. E
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 19
For purposes of granting restricted access to statically configure iSCSI virtual targets, which three of these can be used to identify iSCSI initiators?(Choose three.)
A. iSCS Inodename
B. hostname
C. IPv4 address and subnet
D. MAC address
E. IPv6 address
F. iSCSI WWN
Correct Answer: ACE Section: (none) Explanation
Explanation/Reference:
QUESTION 20
What is a benefit of enhanced zoning?
A. fabriclockedduringconfigurationchanges
B. largerzoningdatabasesize
C. databaserollbackincaseoffailure
D. zonesallowedtospanVSANs
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
CCNA Exam Certification Guide is a best-of-breed Cisco 642-359 exam study guide that has been completely updated to focus specifically on the objectives.Senior instructor and best-selling author Wendell Odom shares preparation hints and Cisco 642-359 tips to help you identify areas of weakness and improve both your conceptual and hands-on knowledge.Cisco 642-359 Material is presented in a concise manner, focusing on increasing your understanding and retention of exam topics.